Immobilizing a Fluorescent Dye Offers Potential to Investigate the Glass/Resin Interface

Silane coupling agents are commonly applied to glass fibers to promote fiber/resin adhesion and enhance durability in composite parts. In this study, a coupling agent multilayer on glass was doped with trace levels of the dimethylaminonitrostilbene (DMANS) fluorophore. The fluorophore was immobilized on the glass surface by tethering the molecule to a triethoxy silane coupling agent, creating the DMANS/silane coupling agent molecule (DMSCA). DMSCA was then diluted with commonly used coupling agents and grafted to a glass microscope coverslip to create a model composite interface. A 53-nm blue shift in fluorescence from the immobilized DMSCA can be followed during cure of an epoxy resin overlayer, giving this technique potential to monitor the properties of the fiber/resin interface during composite processing. Contact angle measurements on these coupling agent layers were similar in the presence or absence of the DMSCA molecule, suggesting that trace levels of the fluorescent probe did not affect the structure of the layer. The immobilized DMSCA molecule behaved similarly to the DMANS precursor in solution. Both showed longer wavelength fluorescence in more polar environments. Copyright 2000 Academic Press.     

(Z)-3-p-tolylsulfinylacrylonitrile as a chiral dienophile: diels-alder reactions with furan and acyclic dienes

The behavior of (Z)-3-p-tolylsulfinylacrylonitrile (1) as a chiral dienophile has been evaluated from its reactions with furan and acyclic dienes. Electrostatic interactions of the cyano group with the sulfinyl one restrict the conformational mobility around the C-S bond, thus controlling the pi-facial selectivity, which is almost complete in all cases, the approach of the diene from the less-hindered face of the dienophile (that bearing the lone electron pair) in the predominant rotamer being the favored one. The regioselectivity is also completely controlled by the cyano group. Additionally, the reactivity of compound 1 as well as its endo-selectivity are both higher than those observed for the corresponding (Z)-3-sulfinylacrylates, thus proving the potential of sulfinylnitriles as chiral dienophiles.     

Evaluation of a dual electrospray ionization/atmospheric pressure chemical ionization source at low flow rates (∼50 µL/min) for the analysis of both highly and weakly polar compounds

The atmospheric pressure ionization (API) source for a commercial mass spectrometer was modified to operate as a dual source in both the electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) techniques by simultaneously utilizing the electrospray probe and the corona discharge needle. A switching box was designed to operate in either manual or programmable modes to permit rapid switching between ionization techniques without changing sources, probes, or breaking vacuum. The source can be operated using the following ionization techniques: ESI only, APCI only, ESI/APCI simultaneously, and ESI/APCI alternatingly. The optimum operating conditions for these ionization techniques were similar to the manufacturer’s original specifications except that the APCI flow rate was lower (～50 µL/min versus 1000 µL/min) and externally heated nebulizing gas was found to be desirable. A four-component mixture, introduced by flow injection, was used to demonstrate the versatility of the dual ESI/APCI source.     

Quantum efficiency of the 2537 A. Photolysis of a mixed phenyl–methyl polysiloxane

The ultraviolet (λ = 2537 A.) photolysis of a degassed mixed phenyl and methyl polysiloxane liquid is examined in terms of gas and crosslinking yields. Results are compared to the published values obtained by ionizing irradiation of this type of molecule. It is shown that ultraviolet radiation is less efficient by two orders of magnitude in producing decomposition (i.e., gaseous products) than is ionizing radiation. The comparisons for crosslinking efficiencies are less certain, but the yields seem to have much more similar values in this case based on a spectroscopic estimation of crosslinking (i.e., analysis for substituted phenylcyclohexadiene formation). The gas quantum yields were ?H₂ = 2.6 × 10^?5, ?CH₄ = 0.63 × 10^?5, ?C₂H₆ ≈ 0.12 × 10^?5, and ?C₂H₂ ≈ 0.06 × 10^?5.     

Annealing of silver nanolayers sputtered on polytetrafluoroethylene

Silver nanolayers sputtered on polytetrafluoroethylene and their changes induced by post‐deposition annealing at 100–300 °C are studied. Changes in surface morphology and roughness are examined by atomic force microscopy and by measurement of electrical sheet resistance by two‐point technique. Chemical composition was determined by X‐ray photoelectron spectroscopy (XPS) and electrokinetic analysis in dependence on the gold layer thickness. The annealing at 300 °C leads to significant rearrangement of the silver layer, and the transition threshold increases to 35 nm. The presence of oxidized structures on silver‐coated samples is observed in XPS spectra and by electrokinetic analysis, too. Annealing of pristine and silver‐coated poly(tetrafluoroethylene) at 300 °C results in significant change of the sample surface morphology and chemistry. There is observed formation of isolated silver islands on the surface, which could be connected with silver melting. Later, the silver agglomeration takes place. Copyright © 2013 John Wiley & Sons, Ltd.     

La3B6O13(OH): The First Acentric High-Pressure Borate Displaying Edge-Sharing BO4 Tetrahedra

La₃B₆O₁₃(OH) was obtained by a high-pressure/high-temperature experiment at 6 GPa and 1673 K. The compound crystallizes in the space group P2₁ (no. 4) with the lattice parameters a=4.785(2), b=12.880(4), c=7.433(3) Å, and β=90.36(10)°, and is built up of corner- as well as edge-sharing BO₄ tetrahedra. It represents the first acentric high-pressure borate containing these B₂O₆ entities. The compound develops borate layers of „sechser“-rings with the La³⁺ cations positioned between the layers. Single-crystal and powder X-ray diffraction, vibrational and MAS NMR spectroscopy, second-harmonic generation (SHG) and thermoanalytical measurements, as well as computational methods were used to affirm the proposed structure and the B₂O₆ entities.