Generation of 287 W, 5.5 ps pulses at 78 MHz repetition rate from a cryogenically cooled Yb:YAG amplifier seeded by a fiber chirped-pulse amplification system

We generate linearly polarized, 287 W average-power, 5.5 ps pulses using a cryogenically cooled Yb:YAG amplifier at a repetition rate of 78 MHz. An optical-to-optical efficiency of 41% is obtained at 700 W pump power. A 6 W, 0.4 nm bandwidth picosecond seed source at 1029 nm wavelength is constructed using a chirped-pulse fiber amplification chain based on chirped volume Bragg gratings. The combination of a fiber amplifier system and a cryogenically cooled Yb:YAG amplifier results in good spatial beam quality at large average power. Low nonlinear phase accumulation as small as 5.1 x 10(-3) rad in the bulk Yb:YAG amplifier supports power scalability to a > 10 kW level without being affected by self-phase modulation. This amplification system is well suited for pumping high-power high-repetition-rate optical parametric chirped-pulse amplifiers.     

Thermo-magneto-hydrodynamical effects on merging flow of TiO2–water nanofluid

Journal of Thermal Analysis and Calorimetry - The steady flow of a nanofluid (mixture of titanium dioxide and water) in a rectangular channel under the influence of an inclined magnetic field is...     

Effect of matrices and additives on phosphorylated and ketodeoxyoctonic acid lipids A analysis by matrix‐assisted laser desorption ionization‐mass spectrometry

Lipid A is a major compound of the outer membrane of gram‐negative bacteria and is a key factor of bacterial virulence. As lipid A's structure differs among bacterial species and varies between strains of the same species, knowing its modifications is essential to understand its implications in the infectious process. To analyze these lipids, matrix‐assisted laser desorption ionization‐mass spectrometry (MALDI‐MS) is a well‐suited method that is fast and efficient. However, there are limitations with the matrix and additives used, such as the suppression of signal or prompt fragmentations that could give a false overview of lipid A composition in biological samples. For a comprehensive analysis of the entire lipid A species present in a sample, we tested 16 matrices and 11 additives on two commercial lipids A. The first commercial one contains single phosphorylation group, and the second contains two phosphorylation and two ketodeoxyoctonic acid (KDO) groups. The lipid A containing KDO groups was essentially detected by the 3‐hydroxypicolinic acid (3‐HPA) matrix, whereas the monophosphorylated lipid A could be detected by 13 matrices out of the 16. We also demonstrated that the signal of diphosphorylated lipid A can be enhanced with the use of additives in the matrix. Our study indicated that the best conditions to obtain a clear signal of both lipids A without prompt fragmentation was the use of 3‐HPA with 10mM trifluoroacetic acid (TFA).     

Piperidine‐functionalized silica: an efficient and environmentally benign catalyst for Claisen–Schmidt condensation

Piperidine‐functionalized silica as a basic heterogeneous catalyst was synthesized via a simple protocol by condensing silica chloride with piperidine. The catalyst was characterized with various techniques (FT‐IR, solid state NMR, scanning electron microscopy, energy‐dispersive X‐ray, thermogravimetric, elemental, and NH₃ and CO₂ temperature‐programmed desorption analyses). Surface area was also evaluated through Brunauer–Emmett–Teller analysis. Its catalytic activity was evaluated for Claisen–Schmidt condensation under solvent‐free conditions. The catalyst was easily recovered and reused up to five cycles without considerable loss of activity and was not deactivated due to amide formation. Also, this method has attractive advantages such as short reaction time, mild reaction conditions, good to excellent yield of products, easy handling of the catalyst and simple operational procedure. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimization of process parameters and its effect on structure and morphology of CuO nanoparticle synthesized via the sol−gel technique

This article describes systematic basic research on the optimization of the processing parameters of sol?gel technique for synthesis of the high purity CuO nanoparticles. Effect of the synthesis parameters such as copper salt concentration, solvent and gelating agent, optimized one at a time, was investigated by employing XRD, TEM, FESEM, micro-Raman, UV-visible-NIR and PL spectroscopies. XRD results clearly demonstrate the monoclinic structure of CuO nanoparticles with traceable impurities at a lower molar concentration of Cu²⁺, transition of nucleation system from homogeneous to heterogeneous state with the increase in concentration of Cu²⁺ from 0.05 to 0.15?M. It was also found that the isopropyl alcohol offers better results in comparison to ethanol and water. Moreover, the lattice parameters, space group, and crystal system were determined by powder X-ray diffraction method. Further we propose the optimization of synthesis process using ethylene glycol and citric acid (EG:CA). The Raman analysis confirmed the influence of ethylene glycol and citric acid ratio and TEM observations confirmed that EG:CA 1:2 ratio formulate homogenous flower-like nanostructures. The optical absorption of CuO nanostructures can be easily tuned by varying the concentration of citric acid without changing other conditions; it shows the role of synthesis parameters more significant. Our results suggest that the prepared CuO nanostructures have a potential to be used as absorbing material in solar cell applications.

Open image in new window

     

2D hydrogen-bonded manganese–picolinate coordination network: ionic liquid-induced synthesis,crystal structure and thermogravimetric analysis

A new manganese coordination complex of formula [Mn(2-picolinate)₂·2H₂O]·H₂O based on 2-picolinic acid has been synthesized hydrothermally at 120 °C for 48 h in presence of ionic liquid tetraethylammonium hydroxide (25% methanolic solution). 1 crystallizes in monoclinic crystal system and is hydrogen-bonded metal-organic network in which aqua ligands are instrumental in deciding structural features. The reported complex 1 is insoluble in almost all organic solvents as well as in water and shows good thermal stability upto 450 °C.     

Silanylidene and Germanylidene Anions: Valence‐Isoelectronic Species to the Well‐Studied Phosphinidene

The reduction of TipMCl₃ (Tip=2,4,6‐triisopropylphenyl) (M=Si, Ge) with KC₈ in the presence of cyclic alkyl(amino) carbene (cAAC) afforded the acyclic silanylidene and germanylidene anions in the form of potassium salt [K(cAAC)MTip]₂ (M=Si ( 1 ); Ge ( 2 )). The silanylidene and germanylidene anions are valence‐isoelectronic to the well‐studied phosphinidene and are a new class of acyclic anions of Group 14. Compounds 1 and 2 were isolated and well characterized by NMR and single‐crystal X‐ray structure analysis. Furthermore, the structure and bonding of compounds 1 and 2 was investigated by computational methods.     

2‐[N‐(2,3‐Dimethylphenyl)carbamoyl]benzenesulfonamide and the 3,4‐ and 2,6‐dimethylphenyl analogues

The structures of 2‐[(2,3‐dimethylphenyl)carbamoyl]benzenesulfonamide, 2‐[(3,4‐dimethylphenyl)carbamoyl]benzenesulfonamide and 2‐[(2,6‐dimethylphenyl)carbamoyl]benzenesulfonamide, all C₁₅H₁₆N₂O₃S, are stabilized by extensive intra‐ and intermolecular hydrogen bonds. In all three structures, the sulfonamide and carbamoyl groups are involved in hydrogen bonding. In the 2,3‐dimethyl and 2,6‐dimethyl derivatives, dimeric units and chains of molecules are formed parallel to the c axis. In the 3,4‐dimethyl derivative, the hydrogen bonding creates tetrameric units, resulting in macrocyclic R₄⁴(22) rings that form sheets in the ab plane. The three analogues are closely related to the fenamate class of nonsteroidal anti‐inflammatory drugs.     

Glass bead grafting with poly(carboxylic acid) polymers and maleic anhydride copolymers

Glass beads were etched with acids and bases to increase the surface porosity and the number of silanol groups that could be used for grafting materials to the surfaces. The pretreated glass beads were functionalized using 3‐aminopropyltriethoxysilane (APS) coupling agent and then further chemically modified by reacting the carboxyl groups of carboxylic acid polymers with the amino groups of the pregrafted APS. Several carboxylic acid polymers and poly(maleic anhydride) copolymers, such as poly(acrylic acid) (PAA), poly(methacrylic acid) (PMA), poly(styrene‐alt‐maleic anhydride) (PSMA), and poly(ethylene‐alt‐maleic anhydride) (PEMA) were grafted onto the bead surface. The chemical modifications were investigated and characterized by FT‐IR spectroscopy, particle size analysis, and tensiometry for contact angle and porosity changes. The amount of APS and the different polymer grafted on the surface was determined from thermal gravimetric analysis and elemental analysis data. Spectroscopic studies and elemental analysis data showed that carboxylic acid polymers and maleic anhydride copolymers were chemically attached to the glass bead surface. The improved surface properties of surface modified glass beads were determined by measuring water and hexane penetration rates and contact angle. Contact angles increased and porosity decreased as the molecular weights of the polymer increased. The contact angles increased with the hydrophobicity of the attached polymer. The surface morphology was examined by scanning electron microscopy (SEM) and showed an increase in roughness for etched glass beads. Copyright © 2007 John Wiley & Sons, Ltd.