Biosensors for environmental pollutants and food contaminants

This review article provides an overview of the most recent literature on biosensors for environmental pollutants and food contaminants. Due to the large number of publications, only papers published between 2000 and January 2003 were considered. Also, while not all of the published literature could be reviewed here, over 200 references are cited to provide a good overview of research undertaken in the last two years. Older publications are covered by a number of earlier review articles. This article provides an introduction into the field including specific consideration of the application areas, describes the typical biosensor assay format used, and is subsequently structured according to the biorecognition elements used (i.e., nucleic acids, enzymes, whole cells, tissue and whole organisms, antibodies and receptors, and biomimetic materials). In addition, a section on microbiosensing systems is provided. Since only very few microbiosensors with applications in environmental and food systems have been published, enabling technology is also covered in this article.Abbreviations BOD biological oxygen demand - cfu colony forming units - DNP dinitrophenol - GFP green fluorescent protein - NASBA nucleic acid sequence-based amplification - PCR polymerase chain reaction - ppt parts per trillion - QCM quartz crystal microbalance - SPR surface plasmon resonance     

Pulse radiolysis of one-electron oxidation of rare tricyclic nucleoside derivative

~~Pulse radiolysis of one-electron oxidation of rare tricyclic nucleoside derivative@赵红卫$Shanghai Institute of Nuclear Research, Chinese Academy of Sciences! Shanghai 201800,China @江致勤$Department of Chemistry, Tongji Unviersity!Shanghai 200092,China @窦大营$Shanghai Institute of Nuclear Research, Chinese Academy of Sciences! Shanghai 201800,China @吴铁一$Shanghai Institute of Nuclear Research, Chinese Academy of Sciences! Shanghai 201800,China @王文锋$Shanghai…     

Determination of Dopamine in the Presence of Ascorbic Acid on the IrO2-Ta2O5 Type DSA Electrode

IrO2Ta2O5 (70%: 30%, molar ratio) electrodes (ITEs) were prepared by the thermal decomposition method. Typical “mud-cracked” surface and surface enrichment of Ta were observed. The determination of dopamine (DA) was carried out in the presence of ascorbic acid (AA). The detection limit of DA was 5~10 5 mol/L without the interference of AA.     

Development of an analytical procedure for determination of selected estrogens and progestagens in water samples

An analytical procedure has been developed for determination of eight selected natural and synthetic hormonal steroids in surface water and in effluent samples. Several methodological points have been investigated and are discussed; they include the choice of the solid-phase extraction sorbent, the influence of flow rate on recovery, the breakthrough volume for a given sorbent (Env+ and Oasis HLB), sample clean up, and sample storage. As regards the latter point, it was found that when no preservative was added to effluent from a sewage-treatment plant, severe loss of steroids occurred—85% of progesterone and about 30% of both estrone and estradiol were found to be degraded in 24 h. The procedure developed was applied to samples from the Seine river estuary. Sex steroids were not detected in surface water; estrone was the most commonly detected steroid in sewage-treatment plant effluent, with levels ranging from 1.8 to 8.3 ng L^–1. Synthetic estrogens (ethynylestradiol and mestranol) and progestagens (levonorgestrel and norethindrone) were never detected, whatever the sampling season. Overall, for 162 out of 168 measurements levels were below the detection limits of the developed procedure.     

Corrosion Protection by Self-Assembly

The inhibition effect and properties of adsorption layers formed by molecule series ,-diphosphono-alkane on iron surface are investigated. A significant difference is obtained in inhibition effect between compounds having alkyl chains with odd and even numbers of carbon atoms; better protection can be achieved by use of diphosphonates containing odd numbers of methylene groups. The best corrosion inhibition could be attained with 1,7-diphosphono-heptane (1,7-DPH). It is found that a certain threshold concentration of the diphosphonate (c > 4 × 10^–4 M) is necessary to ensure sufficient inhibition. The influence of solution concentration on inhibition effect can be interpreted with the layer formation properties and the surfactant nature of molecules. A significant effect of the diphosphonate is appeared on the kinetic of anodic iron dissolution process. Diphosphonates act as anodic inhibitors, the inhibitor layer formation results in a passivation of the metal surface. Well-ordered self-assembled layer with high corrosion protection effect is obtained in aqueous solution of ,-diphosphonic acids. The self-assembly process takes a longer time, few days are necessary to reach the optimal organization of adsorbed organic layer. It is found that aqueous conditions are preferred for the protective layer formation. It is supposed that with simple chemical surface modification, i.e. with immersion of iron into the solution of alkane-diphosphonates, a new surface pre-treatment could be developed.     

Electrocatalysis of Tryptophan at Multi-Walled Carbon Nanotube Modified Electrode

Acid-treated multi-walled carbon nanotubes (MWNTs) were immobilized on the surface of a glassy carbon electrode to form an MWNT-modified electrode. The electrocatalytic response of the modified electrode towards tryptophan (Trp) was investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results demonstrated that the modified electrode exhibited a high degree of catalytic activity towards the oxidation of Trp. An oxidation peak was obtained in Trp solution at the MWNT-modified electrode. Compared with a bare electrode, the peak current had obviously increased, and the peak potential had shifted in a negative direction. However, under the same conditions, no response was observed for other amino acids. The oxidation peak currents were proportional linearly to the concentration of Trp, a property which could be utilized to detect Trp. The determination conditions, such as the concentration, the composition and the pH values of the supporting electrolyte, accumulation time, as well as scan rate etc. were optimized. Under the chosen conditions, the DPV peak current is linear to the concentration of Trp in the range of 2.5×10^–7 to 1.0×10^–4molL^–1, and the detection limit is 2.7×10^–8molL^–1. Moreover, the detection is free of interference from other amino acids. The modified electrode has been successfully applied to determine the concentration of Trp in composite amino acid injections, and it displays excellent repeatability and higher sensitivity.     

Detection of conformational and net charge differences in DNA-protein complexes by quantitative electrophoresis on polyacrylamide-agarose copolymer gels

The Galactosidase repressor (GalR) of Escherichia coli modulates the expression of the gal operon by binding to two DNA operators, OE and O1. The OE and O1 elements are 16 bp pallindromic DNA sequences, differing in four of the base pairs. OE and O1 DNA fragments, both free and complexed with repressor, were analyzed by "quantitative gel electrophoresis". By the criteria of that method, applied to the linear Ferguson plots of both DNA fragments and the linear ranges of those of the DNA-GalR complexes, it was shown that the apparent size of DNA increases upon repressor binding. Moreover, this size increase is greater for the complex with the O1 operator than for the complex with the OE operator in the case that GalR is located in the center of a 155 bp DNA fragment. This is not the case when GalR is located in a peripheral position. By contrast with their size differences, the centrally located GalR-O1 and GalR-OE complexes appear to possess indistinguishable net surface charge densities as judged from the intercepts with the mobility axis. The larger size of the complex with centrally located O1 fragment, as compared with that bearing the OE fragment, is interpreted as being due to bending of the DNA-protein complex, since an authentically bent fragment of a plasmid with bent upstream activator sequence also exhibits a larger slope of the Ferguson plot, and thus the larger size, than predicted on the basis of its DNA chain length (bp).(ABSTRACT TRUNCATED AT 250 WORDS)     

Fractal calibration in size-exclusion chromatography I. An introduction

The elution behaviour of different polymer-solvent systems in three types of organic columns for SEC has been compared and interpreted. The experimental data show that the classical universal calibration is not accomplished. Deviations from a unique curve are observed due to the binary and ternary interactions between the components of the system (solvent, polymer and gel) which results on secondary mechanisms accompanying the main pure or "ideal" SEC separation mechanism. Both, enthalpic and entropic effects are interpreted in terms of the swelling and crosslinking degrees of the gel packings, and are also related with the fractal characteristics of their surfaces, such as the fractal dimension and the available pore size. Moreover, a relationship between the fractal dimension of the pore surface and the chromatographic distribution coefficient is proposed.     

Hydroxyl radical probe of the calmodulin-melittin complex interface by electrospray ionization mass spectrometry

The calcium-dependent interaction of calmodulin and melittin is studied through the application of a radical probe approach in which solutions of the protein and peptide and protein alone are subjected to high fluxes of hydroxyl and other oxygen radicals on millisecond timescales. These radicals are generated by an electrical discharge within an electrospray ion source of a mass spectrometer. Condensation of the electrosprayed droplets followed by proteolytic digestion of both calmodulin and melittin has identified residues in both which participate in the interaction and/or are shielded from solvent within the protein complex. Consistent with other theoretical models and available experimental data, the tryptophan residue of melittin at position 19 is shown to be critical to the formation of the complex with the C-terminal domain of peptide enveloped by and protected from oxidation upon binding to the protein. Furthermore, the N-terminal domain (to residue 36) and tyrosine at position 99 in calmodulin are significantly protected from limited oxidation upon the binding of melittin while exposing the phenylalanine residue at position 92 of the flexible loop domain. The N-terminus (through residue 36) of calmodulin is shown to lie in closer proximity to the melittin helix than its C-terminal counterpart (residues 127-148) based upon the protection levels measured at reactive residues within these segments of the protein.