Synthesis of novel 3,5-disubstituted-dihydroisoxazoles from methyl undec-10-enoate and isoxazoles,triazole and tetrazolo-triazole from methyl undec-10-ynoate

The efficient cycloaddition reactions were carried out to afford the novel 3,5-disubstituted-dihydroisoxazoles from methyl undec-10-enoate and isoxazoles, triazole and tetrazolo-triazole from methyl undec-10-ynoate. The reactions occurred under relatively mild conditions and afforded the desired products in good yields.     

Spectrophotometric and reversed-phase high-performance liquid chromatographic methods for simultaneous determination of escitalopram oxalate and clonazepam in combined tablet dosage form

Simple, accurate, precise, and sensitive ultraviolet spectrophotometric and reversed-phase high-performance liquid chromatographic (RP-HPLC) methods for simultaneous estimation of escitalopram oxalate (ESC) and clonazepam (CLO) in combined tablet dosage form have been developed and validated. The spectroscopic method employs an absorbance correction method using 238.6 and 308 nm as 2 wavelengths for estimation with methanol and water as solvents. Beer's law is obeyed in the concentration range of 10.0-50.0 and 0.5-3.0 micro/mL for ESC and CLO, respectively. The RP-HPLC method uses a Jasco HPLC system with HiQ SiL C18 column (250 x 4.6 mm id) acetonitrile-0.005 M tetrabutylammonium hydrogen sulfate (55 + 45, v/v) as the mobile phase, and satranidazole as an internal standard. The detection was carried out using an ultraviolet detector set at 287 nm. For the HPLC method, Beer's law is obeyed in the concentration range of 10.0-60.0 and 0.5-3.0 microg/mL for ESC and CLO, respectively. Both methods have been successfully applied for the analysis of the drugs in a pharmaceutical formulation. Results of analysis were validated statistically and by recovery studies.     

Column reversed-phase high-performance liquid chromatographic method for simultaneous determination of rabeprazole sodium and domperidone in combined tablet dosage form

A new, simple column reversed-phase high-performance liquid chromatographic (HPLC) method for simultaneous determination of rabeprazole sodium (RAB) and domperidone (DOM) in a combined tablet dosage form has been developed and validated. Determination was performed using a Jasco HPLC system with a HiQ SiL octadecylsilane (C18) column (250 x 4.6 mm id), acetonitrile-0.1 M ammonium acetate (50 + 50, v/v) mobile phase, and paracetamol as an internal standard. The detection was performed using a UV detector set at 280 nm. The method was validated with respect to linearity, accuracy, precision, and robustness. Beer's law was obeyed in the concentration range of 1.0-10.0 and 0.5-5.0 microg/mL for RAB and DOM, respectively. The method has been successfully applied for the analysis of drugs in a pharmaceutical formulation.     

Spectroscopic studies of transition metal complexes with a N-donor tetradentate(N4) 12-membered macrocylic ligand

Chromium(III), manganese(II), iron(III), cobalt(II), nickel(II), copper(II), ruthenium(III), iridium(III), palladium(II) and platinum(II) complexes were synthesized with a 12-membered 1,4,7,10-tetraazadodeca-5,6,11,12-tetraene macrocylic ligand (L) and characterized by elemental analysis, molar conductance, magnetic susceptibility, IR, electronic, EPR and M?ssbauer [Fe(III)] spectral studies. The molar conductance measurements of all the complexes in DMF solution correspond to non-electrolytic nature for M(L)Cl2 complexes [where M=Mn(II), Co(II), Ni(II), Cu(II)], 1:1 electrolytes for M'(L)Cl3 complexes [where M'=Cr(III), Fe(III), Ru(III) and Ir(III)] and 1:2 electrolytes for M'(L)Cl2 complexes [where M'=Pd(II) and Pt(II)]. Thus, the complexes may be formulated as [M(L)C1(2)], [M'(L)C1(2)]C1 and [M'(L)]C1(2), respectively [where L=ligand]. All complexes were of the high-spin type and found to have six-coordinate octahedral geometry except the Pd(II) and Pt(II) complexes which were four coordinate, square planar and diamagnetic.     

Surface structural,morphological, and catalytic studies of homogeneously dispersed anisotropic Ag nanostructures within mesoporous silica

Highly dispersed anisotropic Ag nanostructures were synthesized within the channels of 3-aminopropyltrimethoxysilane (APTMS)-modified mesoporous SBA-15 for catalyzing the reduction of p-dinitrobenzene, p-nitrophenol, and p-nitroacetophenone, respectively. A green templating process without involving any reducing agent, by varying the amount (1–10 wt.%) of Ag loading followed by calcination at 350 °C under H₂ led to change in the morphology of Ag nanoparticles from nanospheres (~7–8 nm) to nanorods (aspect ratio ~12–30 nm) without any deformation in mesoporous sieves. In comparison to white bare SBA-15, gray-colored samples were formed with Ag impregnation exhibiting absorption bands at 484 and 840 nm indicating the formation of anisotropic Ag nanostructures within mesoporous matrix. TEM and FE-SEM micrographs confirmed the presence of evenly dispersed Ag nanostructures within as well as on the surface of mesoporous matrix. AFM studies indicated a small decrease in the average roughness of SBA-15 from 20.59 to 19.21 nm for 4 wt.% Ag/m-SBA-15, illustrating the encapsulation of majority of Ag nanoparticles in the siliceous matrix and presence of small amount of Ag nanoparticles on the mesoporous support. Moreover, due to plugging of mesopores with Ag, a significant decrease in surface area from 680 m²/g of SBA-15 to 385 m²/g was observed. The Ag-impregnated SBA-15 catalyst displayed superior catalytic activity than did bare SBA-15 with 4 wt.% Ag-loaded catalyst exhibiting optimum activity for selective reduction of p-nitrophenol to p-aminophenol (100 %), p-nitroacetophenone to p-aminoacetophenone (100 %), and p-dinitrobenzene to p-nitroaniline (87 %), with a small amount of p-phenylenediamine formation.

Open image in new window

Graphical abstract This paper demonstrates the spontaneous formation of uniformly dispersed Ag nanospecies of various morphologies (nanospheres, size ~7–8 nm and nanorods, aspect ratio ~12–30 nm), both within as well as on the surface of the mesoporous SBA-15, as a function of increased Ag loading. Surface structural and other physiochemical properties of Ag/m-SBA-15 nanocomposites were considerably influenced w.r.t change in Ag loading. Ag/m-SBA-15 nanocomposites with 4 wt.% Ag loading exhibited the highest selectivity (87 %) for the selective reduction of p-dinitrobenzene to p-nitroaniline and 100 % selectivity for p-nitrophenol to p-aminophenol and p-nitroacetophenone to p-aminoacetophenone, respectively.

     

Effect of nitro groups on the photo physical properties of benzimidazolone: a solvatochromic study

Electronic absorption and fluorescence spectra of mono, di, and tri-nitro benzimidazolones are measured at room temperature (298 K) in nine solvents with different polarities and the observed shifts are compared with benzimidazolone. Ground and excited state electric dipole moments are determined using the solvatochromic method based on the bulk solvent properties, F(1)(ε, n) and F(2)(ε, n). A reasonable agreement is observed between the experimental and ab initio dipole moments. Change in dipole moment is also determined using the solvatochromic method based on the microscopic solvent polarity parameter, (E(T)(N)), which considers the polarization changes due to hydrogen bonding in different solvents. It has been observed that the correlation of the solvatochromic Stokes shifts with the parameter (E(T)(N)), is superior to that derived using bulk solvent polarity functions for all the benzimidazolones reported in the present study. Calculated difference between excited state and ground state dipole moments seems to be a good measure of the effect of nitro group when correlated with (E(T)(N)).     

A Novel Electrochemical Sensor for Detection of Molinate Using ZnO Nanoparticles Loaded Carbon Electrode

In this work, electrochemical detection of molinate herbicide was studied by developing a novel sensor based on carbon paste incorporated with zinc oxide (ZnO) nanoparticles using cyclic (CV) and square wave voltammetric (SWV) techniques. Molinate exhibited one well resolved peak at pH of 3.0 phosphate buffer solution (PBS), which was irreversible. The lowest possible detection limit of 1.0×10^?8 M was achieved in the concentration range of 0.002 μM to 0.25 μM. The modifying ability of ZnO nanoparticles was responsible for such a low level sensing in water and soil samples.     

Growth and synthesis of Sr<Subscript>3</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>8</Subscript>:Dy<Superscript>3+</Superscript> nanorod arrays by a solid state reaction method

Sr₃MgSi₂O₈:Dy³⁺ Nano-rods were synthesized by using solid state reaction method. The structural properties, morphology and band structure properties of the phosphor was studied. The structural properties were examined by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Bonding behaviour of the phosphor was also determined by recording the FTIR spectra of the phosphor. Band structure i.e. band gap of the phosphor was determined by recording the absorption spectrum. The absorption spectrum was recorded for the sample and the band gap was determined by using Tauc plot. Band gap of the phosphor was found around 5.4 eV.     

Synthesis and characterization of Sb-doped CdTe films

Antimony doped CdTe films electrodeposited in a non-aqueous bath have been characterized using in- and ex-situ techniques. Cyclic voltammetry in dark and under illumination has been used as an in-situ probe to investigate Sb incorporation. The effect of Sb-doping on the composition, structure, morphology, optical and electronic properties have also been investigated using XPS, PIXE, XRD, SEM, AFM, Optical Absorption spectroscopy, resistivity and thermoemf measurements.