IN SITU OBSERVATION OF MELTING AND CRYSTALLIZATION BEHAVIORS OF POLY(ε-CAPROLACTONE) ULTRA-THIN FILMS BY AFM TECHNIQUE

The melting and crystallization behaviors of poly(ε-caprolactone) (PCL) ultra-thin films with thickness from 15 nm to 8 nm were studied by AFM technique equipped with a hot-stage in real-time. It was found that melting can erase the spherulitic structure for polymer film with high thickness. However, annealing above the melting point can not completely erase the tree-like structure for the thinner polymer film. Generally, the structure formation of thin polymer films of PCL is controlled not only by melting and crystallization but also by dewetting during thermal annealing procedures, and dewetting predominates in the structure formation of ultra-thin films. However, the presence of tree-like morphology at 75 °C may be due to the strong interaction between PCL and mica surface, which may stick the PCL chains onto the mica surface during thermal annealing process. Moreover, the growth of the dendrites was investigated and it was found that crystallization is followed from a dewetted sample, and the branches did not grow with the stems. The crystallization of polymer in the ultra-thin films is a diffusion-controlled process. Both melting and crystallization behaviors of PCL in thin films are influenced by film thickness.     

Frontal polymerization synthesis and characterization of temperature- and pH-sensitive hydrogels

The temperature- and pH-sensitive hydrogels, poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAM-co-AAc)), were synthesized via frontal polymerization (FP). The reaction components have been varied in order to find their influences on frontal parameters and copolymer features. The results showed that front velocity and front temperature were dependent on the initiator concentration, reactant dilution, and NIPMA/AAc molar ratio. In addition, the morphology and sensitive behavior of the FP hydrogels were mainly affected by monomers’ ratio. Namely, the pore size, swelling abilities, LCST, and response kinetics of copolymer hydrogels obviously increased with the increasing acrylic acid concentration; however, they slightly changed with varying of amounts of initiator and solvent. Finally, in comparison with the hydrogels prepared by conventional batch polymerization, the ones synthesized by frontal polymerization exhibited more homogeneous chain composition and improved microstructure and response ability.     

Enhanced orientation of PEO polymer chains induced by nanoclays in electrospun PEO/clay composite nanofibers

Polymer fibers composed of poly(ethylene oxide) (PEO) and nanoclay were fabricated by electrospinning. The morphology of the composite nanofibers was characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which showed aligned nanoclays in the fibers. Polarized Fourier transform infrared (FT-IR) spectroscopy revealed that the PEO chains in the composite fibers exhibit a higher degree of orientation than that in PEO nanofibers containing no nanoclay. It is believed that spatial confinement is present in the electrospun nanofibers, which results in the enforcement of the mutual restriction. The anisotropic hierarchical nanostructure may have potential applications in optics, mechanical materials, and biomedical materials for cell culture.     

Cooperative Effects in Catalytic Hydrogenation Regulated by both the Cation and Anion of an Ionic Liquid

The use of transition‐metal nanoparticles/ionic liquid (IL) as a thermoregulated and recyclable catalytic system for hydrogenation has been investigated under mild conditions. The functionalized ionic liquid was composed of poly(ethylene glycol)‐functionalized alkylimidazolium as the cation and tris(meta‐sulfonatophenyl)phosphine ([P(C₆H₄‐m‐SO₃)₃]^3?) as the anion. Ethyl acetate was chosen as the thermomorphic solvent to avoid the use of toxic organic solvents. Due to a cooperative effect regulated by both the cation and anion of the ionic liquid, the nanocatalysts displayed distinguished temperature‐dependent phase behavior and excellent catalytic activity and selectivity, coupled with high stability. In the hydrogenation of α,β‐unsaturated aldehydes, the ionic‐liquid‐stabilized palladium and rhodium nanoparticles exhibited higher selectivity for the hydrogenation of the C?C bonds than commercially available catalysts (Pd/C and Rh/C). We believe that the anion of the ionic liquid, [P(C₆H₄‐m‐SO₃)₃]^3?, plays a role in changing the surrounding electronic characteristics of the nanoparticles through its coordination capacity, whereas the poly(ethylene glycol)‐functionalized alkylimidazolium cation is responsible for the thermomorphic properties of the nanocatalyst in ethyl acetate. The present catalytic systems can be employed for the hydrogenation of a wide range of substrates bearing different functional groups. The catalysts could be easily separated from the products by thermoregulated phase separation and efficiently recycled ten times without significant changes in their catalytic activity.     

(Ca,Me)La4Si3O13:Eu3+(Me=Sr,Ba)荧光粉的结构和发光特性

采用高温固相法制备了(Ca,Me)La4Si3O13∶Eu3+(Me=Sr,Ba)系列红色荧光体,考察了Eu3+掺杂浓度和Sr2+,Ba2+置换对荧光体结构和发光特性的影响。Eu3+最佳掺杂浓度为nEu3+∶nLa3+=1∶7,5D0-7F2与5D0-7F1跃迁发射强度比为2.55。Eu3+掺杂使晶胞参数a和c呈线性变小,对c的影响大于a,使a/c比增大。Sr2+和Ba2+分别置换基质中的Ca2+可以形成完全固溶体,晶胞参数随Sr2+或Ba2+的置换量增加呈线性增大,使a/c比减小。各发射峰强度在Sr2+置换量为0.4 mol时出现极大值,但随Ba2+置换量的增加而不断增强,全置换后荧光强度最大。荧光体的色坐标为(0.638 5,0.353 0)。     

Three New Coordination Compounds with Neodymium Based on Tetrazole Containing Carboxylic Acid Ligands

Reactions of three tetrazole containing carboxylic acid ligands, namely, Hpztza, Htzpya, and Hpytza [Hpztza = 5‐(2‐pyrazinyl)tetrazole‐2‐acetic acid, Htzpya = 3‐(5‐tetrazolyl)pyridine‐1‐acetic acid, Hpytza = 5‐(3‐pyridyl)tetrazole‐2‐acetic acid] with NdCl₃ · 6H₂O under hydrothermal conditions, afforded the complexes [Nd(pztza)₂(H₂O)₆] · pztza · 3H₂O ( 1 ), [Nd₂(tzpya)₂(H₂O)₁₂]Cl₄ · 2H₂O ( 2 ), and [Nd(pytza)₂Cl(H₂O)₂] ( 3 ). The compounds were structurally characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray diffraction. X‐ray diffraction analyses revealed that compound 1 displays a mononuclear structure, 2 shows a dinuclear structure, and 3 features a 1D polymeric chain structure via pytza as linker. Furthermore, the luminescent properties investigated at room temperature in the solid state show that compound 2 has an obvious decrease in its luminescence, when compared to the ligand.     

Negative‐pressure‐induced collector for a self‐balance free‐flow electrophoresis device

Uneven flow in free‐flow electrophoresis (FFE) with a gravity‐induced fraction collector caused by air bubbles in outlets and/or imbalance of the surface tension of collecting tubes would result in a poor separation. To solve these issues, this work describes a novel collector for FFE. The collector is composed of a self‐balance unit, multisoft pipe flow controller, fraction collector, and vacuum pump. A negative pressure induced continuous air flow rapidly flowed through the self‐balance unit, taking the background electrolyte and samples into the fraction collector. The developed collector has the following advantages: (i) supplying a stable and harmonious hydrodynamic environment in the separation chamber for FFE separation, (ii) effectively preventing background electrolyte and sample flow‐back at the outlet of the chamber and improving the resolution, (iii) increasing the preparative scale of the separation, and (iv) simplifying the operation. In addition, the cost of the FFE device was reduced without using a multichannel peristaltic pump for sample collection. Finally, comparative FFE experiments on dyes, proteins, and cells were carried out. It is evident that the new developed collector could overcome the problems inherent in the previous gravity‐induced self‐balance collector.     

Simultaneous determination of ten organophosphate pesticide residues in fruits by gas chromatography coupled with magnetic separation

In this study, γ‐Fe₂O₃/chitosan magnetic microspheres were synthesized and evaluated by X‐ray diffraction, SEM, thermogravimetric analysis, and static and kinetic adsorption experiments. Results showed that the magnetic microspheres exhibited good adsorption ability, and offered fast kinetics for the adsorption of trichlorfon, methamidophos, malathion, methyl parathion, dimethoate, omethoate, phosphamidon, phorate, isocarbophos, and chlorpyrifos. Based on magnetic separation, a simple method of magnetic SPE coupled to GC for the simultaneous determination of ten trace organophosphate pesticide residues was developed. Under the optimal conditions, the enrichment factor for ten organophosphorus pesticides was 10.1–364.7 and linear range was 0.001–10.0 mg/L. The LOD (S/N = 3) of the method for the ten pesticides was 0.31–3.59 μg/kg. The RSD for three replicate extractions of spiked samples was between 2.5 and 6.3%. The pear and apple samples spiked with ten organophosphate pesticides at 20 and 200 μg/kg levels were extracted and determined by this method with good recoveries ranging from 79.9 to 98.7%. Moreover, the method has been successfully applied for the determination of the ten organophosphate pesticide residues in peach samples.     

Self‐Assembly of Five 8‐Hydroxyquinolinate‐Based Complexes: Tunable Core,Supramolecular Structure,and Photoluminescence Properties

Five new Zn^II complexes, namely [Zn₃(L)₆] ( 1 ), [Zn₂(Cl)₂(L)₂(py)₂] ( 2 ), [Zn₂(Br)₂(L)₂(py)₂] ( 3 ), [Zn(L)₂(py)] ( 4 ), and [Zn₂(OAc)₂(L)₂(py)₂] ( 5 ), were prepared by the solvothermal reaction of ZnX₂ (X^?=Cl^?, Br^?, F^?, and OAc^?) salts with a 8‐hydroxyquinolinate ligand (HL) that contained a trifluorophenyl group. All of the complexes were characterized by elemental analysis, IR spectroscopy, and powder and single‐crystal X‐ray crystallography. The building blocks exhibited unprecedented structural diversification and their self‐assembly afforded one mononuclear, three binuclear, and one trinuclear Zn^II structures in response to different anions and solvent systems. Complexes 1 – 5 featured four types of supramolecular network controlled by non‐covalent interactions, such as π???π‐stacking, C? H???π, hydrogen‐bonding, and halogen‐related interactions. Investigation of their photoluminescence properties exhibited disparate emission wavelengths, lifetimes, and quantum yields in the solid state.