全光学高灵敏度铷原子磁力仪的研究

报道了一种全光学的高灵敏度铷原子磁力仪.其原理是基于激光束与处于微弱磁场中的铷原子的相互作用.这种相互作用与铷原子所处的环境中的磁场有关,因而通过测量透过铷原子气体的激光强度的变化可以获得磁场信息.分析了该磁力仪的工作原理,建立了相应的实验装置,并对其性能进行了测试.结果表明实验结果与理论相符合.进一步研究了影响磁力仪灵敏度的一些因素,提出了优化各参数来提高磁力仪灵敏度的方法.     

基于时间相关单光子计数的荧光寿命成像技术

采用时域法中的时间相关单光子计数方法记录荧光寿命,时间相关单光子计数采用多波长通道同时记录荧光光子数,可以提高计数效率和信息量,还可以在稳态图像中分离不同荧光团,形成4维图像。并采用多光子激发技术,利用长波长光源发出的两个或多个光子可以激发出一个短波长的光子。多个光子必须几乎同时到达激发点,才能提供被激发分子足够的能量以产生荧光。多光子激发波长较长,生物组织对其散射减小,因而可以穿透到更深层的组织,从而提高荧光成像深度和空间分辨力,并减少对活体样品的损伤。     

螺旋扁管管外蒸汽冷凝双侧强化传热试验研究

为促进螺旋扁管在冷凝换热装置上的应用,对螺旋椭圆管管外蒸汽冷凝工况下的传热特性进行了试验研究。研究结果表明,螺旋椭圆管在强化管内无相变对流传热的同时也可以强化管外冷凝传热。相同工况下,同圆管相比,所用螺旋椭圆扁管的总传热系数高11%-16%,管内传热系数高约18%,管外冷凝传热系数高约9%。并从二次流减薄传热边界层及冷凝表面利于排除冷凝液的角度,分析了螺旋椭圆扁管的双侧强化传热机理。     

机械刻划光栅的光线追迹方法

为了评价光栅的光谱质量,完成所设计光栅的光线追迹,针对机械刻划光栅的光线追迹提出了一种改进方法.在费马原理的基础上利用光程函数法得到入射光通过光栅后的光谱分布情况,再使用传输矩阵的计算方法构造出光谱的点列图.该方法适用于刻划在平面、球面和非球面基坯上的等间距和变间距光栅,光栅的光谱面可以为平面或者二次曲面. 通过刻划在非球面基坯上的凹面光栅验证了光线追迹方法的可靠性.     

Determination of the ~(12)C(p, γ)~(13)N reaction rates fromthe ~(12)C(~7Li,~6He)~(13)N reaction

The angular distribution of the 12C(7Li,6He)13N reaction at E(7Li) = 44.0 MeV was measured at the HI-13 tandem accelerator of Beijing, China. The asymptotic normalization coefficient (ANC) of 13N → 12C + p was derived to be (1.64 ± 0.11) fm-1/2 through the distorted wave Born approximation (DWBA) analysis. The ANC was then used to deduce the astrophysical S (E) factors and reaction rates for the 12C(p,γ)13N direct capture reaction at energies of astrophysical relevance.     

Design of low-loss tapered waveguide by applying photonic-crystal-based microlenses in telescopic structure

In this paper, the design of low-loss tapered waveguides by applying photonic-crystal-based microlenses is presented. The microlenses are realized by using two-dimensional photonic crystal (PhC) structures with a hexagonal periodic lattice of air-holes. In order to make the PhC structures behave as homogeneous and isotropic microlenses, the PhC structures are designed to operate in the low-frequency domain with light wavelength sufficiently larger than the PhC lattice constant. The effective indices of the PhC are calculated and the structures are properly arranged in microlenslike shapes. By monolithically integrating the effective microlenses in the tapered area between the two optical waveguides with different core dimensions, the wavefront of the eigenmode can be coupled from the larger core to the smaller core effectively and also the radiation loss in the tapered area between the two connected optical waveguides can be effectively suppressed. The results show that the PhC-based microlens in the telescopic structure can serve as an optical element in the tapered waveguide with the advantages of low loss, high efficiency and compactness.     

Ultrasonic irradiation and its application for improving the corrosion resistance of phosphate coatings on aluminum alloys

In this paper, ultrasonic irradiation was utilized for improving the corrosion resistance of phosphate coatings on aluminum alloys. The chemical composition and morphology of the coatings were analyzed by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM). The effect of ultrasonic irradiation on the corrosion resistance of phosphate coatings was investigated by polarization curves and electrochemical impedance spectroscopy (EIS). Various effects of the addition of Nd₂O₃ in phosphating bath on the performance of the coatings were also investigated. Results show that the composition of phosphate coating were Zn₃(PO₄)₂ · 4H₂O(hopeite) and Zn crystals. The phosphate coatings became denser with fewer microscopic holes by utilizing ultrasonic irradiation treatment. The addition of Nd₂O₃ reduced the crystallinity of the coatings, with the additional result that the crystallites were increasingly nubby and spherical. The corrosion resistance of the coatings was also significantly improved by ultrasonic irradiation treatment; both the anodic and cathodic processes of corrosion taking place on the aluminum alloy substrate were suppressed consequently. In addition, the electrochemical impedance of the coatings was also increased by utilizing ultrasonic irradiation treatment compared with traditional treatment.     

Density functional theory study on Ni-doped MgnNi (n=1-7) clusters

The possible geometrical and the electronic structures of small MgnNi(n = 1-7) clusters are optimised by the density functional theory with a LANL2DZ basis set.The binding energy,the energy gap,the electron affinity,the dissociation energy and the second difference in energy are calculated and discussed.The properties of Mg n Ni clusters are also discussed when the number of Mg atom increases.     

A way of constructing translation network operators by Bernstein operators

In the present paper,we provide a way of constructing translation network operators by Bernstein-Durrmeyer operators.     

The effect of glottal angle on intraglottal pressure

Intraglottal pressure distributions depend upon glottal shape, size, and diameter. This study reports the effects of varying glottal angle on intraglottal and transglottal pressures using a three-dimensional Plexiglas model with a glottis having nine symmetric glottal angles and a constant minimal glottal diameter of 0.06 cm. The empirical data were supported by computational results using FLUENT. The results suggested that (1) the greater the convergent glottal angle, the greater outward driving forces (higher intraglottal pressures) on the vocal folds; (2) flow resistance was greatest for the uniform glottis, and least for the 10 degrees divergent glottis; (3) the greatest negative pressure in the glottis and therefore the greatest pressure recovery for diverging glottal shapes occurred for an angle of 10 degrees; (4) the smaller the convergent angle, the greater the flow resistance; (5) FLUENT was highly accurate in predicting the empirical pressures of this model; (6) flow separation locations (given by FLUENT) for the divergent glottis moved upstream for larger flows and larger glottal angles. The results suggest that phonatory efficiency related to aerodynamics may be enhanced with vocal fold oscillations that include large convergent angles during glottal opening and small (5 degrees - 10 degrees) divergent angles during glottal closing.