Unusual enhancement in electrical conductivity of tin oxide thin films with zinc doping

Electrical conductivity of SnO(2)-based oxides is of great importance for their application as transparent conducting oxides (TCO) and gas sensors. In this paper, for the first time, an unusual enhancement in electrical conductivity was observed for SnO(2) films upon zinc doping. Films with Zn/(Zn + Sn) reaching 0.48 were grown by pulsed spray-evaporation chemical vapor deposition. X-Ray diffraction (XRD) shows that pure and zinc-doped SnO(2) films grow in the tetragonal rutile-type structure. Within the low doping concentration range, Zn leads to a significant decrease of the crystallite size and electrical resistivity. Increasing Zn doping concentration above Zn/(Zn + Sn) = 0.12 leads to an XRD-amorphous film with electrical resistivity below 0.015 ? cm at room temperature. Optical measurements show transparencies above 80% in the visible spectral range for all films, and doping was shown to be efficient for the band gap tuning.     

Development of a Biomimetic Enzyme‐linked Immunosorbent Assay Method for the Determination of Methimazole in Urine Sample

A fast and direct competitive biomimetic enzyme‐linked immunosorbent assay (BELISA) method was developed for the determination of methimazole (MMZ) in urine sample based on a molecularly imprinted film as an artificial antibody. This is the first example to monitor methimazole with a direct competitive biomimetic enzyme‐linked immunosorbent assay (BELISA) method. The imprinted film was directly synthesized on the well surface of MaxiSorp polystyrene 96‐well plate and characterized. The results showed that it exhibited an antibody‐like binding ability, rapid adsorption speed, high stability, which was particularly advantageous and suitable for BELISA development. The BELISA method established in this paper had a higher selectivity for MMZ than for the structurally related compounds and the IC₅₀ (calculated as the concentration giving 50% inhibition of color development) and the detection limit values under optimized experimental conditions were 70 ± 4 μg L^‐1 and 0.9 ± 0.04 μg L^‐1, respectively. The method was applied to the determination of MMZ in spiked urine sample with excellent recoveries ranging from 90% to 95%, and the imprinted film was able to be reused for 20 times without loss of sensitivity. The results obtained by BELISA correlated well with that obtained by the high performance liquid chromatography (HPLC) method.     

A Dual Colorimetric and Fluorometric Sensor for Lead Ion Based on Conjugated Polydiacetylenes

A PDA based sensor, derived from a di‐(2‐picolyl) amine (DPA) substituted diacetylene monomer, displayed a selective colorimetric change and a large fluorescence enhancement in the presence of lead ions. The lead selective PDA‐based chemosensor enabled easy detection of the presence of lead in 100% aqueous solution by the naked‐eye.

     

Concentration and clean-up of trace hydrocarbons from atmospheric particulate matter

Summary The aim of this work is to establish the best conditions for concentration and purification steps in the trace analysis of aliphatic and polycyclic aromatic hydrocarbons (PAH) from atmospheric particulate matter by gas chromatography-flame ionisation detection (GC-FID) and high performance liquid chromatography with ultraviolet and fluorescence detection (HPLC-UV-FL). The best results for the more volatile compound were obtained with a combination of rotary evaporation and a stream of nitrogen (near to 100% for aliphatic hydrocarbons and from 70 to 105% for PAH). Two types of solid phase extraction (SPE)cartridges (Supelclean ^tm LC-Silica SPE tubes and Sep-Pak^? Plus silica cartridges) and glass column were examined for the purification and fractionation step. Blank chromatograms of both types of cartridges analysed by GC-FID made this study difficult, because a PSS (programmed split-splitless) injector was employed thereby increasing the sensitivity. This problem was not observed in the HPLC-UV-FL blank chromatograms of these cartridges. Glass columns filled with silica and alumina were chosen because no interference was found in the GC-FID blank chromatograms and the best recoveries in the fractionation of both aliphatic hydrocarbons and PAH were achieved. This is especially important when aliphatic hydrocarbons concentrations are lower than 1 μg mL⁻¹. Finally, the selected conditions were applied to the analysis of hydrocarbons in real atmospheric particulate samples.     

LeDock与PyMOL软件在天然产物化学课程教学中的应用*——以中药防治新冠病毒肺炎(COVID-19)为例

以中药防治新冠病毒肺炎(COVID-19)为例,在天然产物化学课程教学中借助LeDock软件进行天然产物小分子与受体蛋白分子之间的半柔性对接,用PyMOL软件分析天然产物小分子与受体蛋白分子之间的相互作用,全方位充分展示天然产物分子结构和功能之间的关系。教学围绕我国当前形势展开,让学生在了解事实的同时激发其学习热情,培养学生的逻辑思维能力和动手能力,以此来提高教学质量。     

东太平洋深海锰结核的化学元素研究

用ICP-AES法测定了东太平洋深海锰结核样品中二十多种主，次及微量元素，结果表明，表面瘤状和表面光滑两种类型锰结核的化学元素含量有较明显的区别，如表面光滑的锰结核TiO2含较高，而表面瘤状的锰结核Mn/Fe之值较高等。     

Optimization,validation and comparison of various extraction techniques for the trace determination of polycyclic aromatic hydrocarbons in sewage sludges by liquid chromatography coupled to diode-array and fluorescence detection

There is a need for a better characterization of sludges from wastewater treatment plants which are destined to be spread on agricultural lands. Inorganic pollutants are regularly controlled but organic pollutants have received few attention up to now. On this paper, we have been interested on the analysis of the 16 polycyclic aromatic hydrocarbons (PAHs) listed in the US Environmental Protection Agency (US EPA) priority list and more particularly of the six PAHs listed in the European community list (fluoranthene, benzo[b and k]fluoranthene, benzo[a]pyrene, benzo[ghi]perylene, indeno[1,2,3-cd]pyrene). The analysis step consists on liquid chromatography with both fluorescence and UV detections as described in the EPA Method 8310. As for the extraction step, several techniques such as supercritical fluid extraction, pressurized liquid extraction, focused microwave extraction in open vessels, Soxhlet and ultrasonic extractions are compared after optimization of the experimental conditions (solvent nature and quantity, temperature, pressure, duration, ... ) and validation with certified sludges. When optimized, these five extraction techniques are as much efficient with similar relative standard deviation. Whatever the extraction techniques used, the whole analysis protocol permits to quantify PAHs in the range of 0.09 to 0.9 mg/kg of dried sludges.     

基于苯乙烯腈结构的可逆力致变色化合物的合成及性能

合成了一种棒形的化合物4,4'-二(α-腈基-4-苯丙氧基苯乙烯)联苯(Ben-DCSB), 利用核磁共振(NMR)、质谱(EI-MS)、傅里叶变换红外光谱(FT-IR)和元素分析等对其进行了结构表征. 对Ben-DCSB重结晶粉末进行研磨后, 其发光颜色从蓝绿色变成黄绿色, 荧光量子效率(Φ_F)从初始的52.7%变为38.7%, 表明该化合物具有力致变色性质. 扫描电子显微镜(SEM)、X-射线衍射(XRD)和荧光寿命等测试结果显示, 这种现象是由于在外界环境刺激下改变了Ben-DCSB在聚集态下的分子堆积结构所造成的. 研磨后的样品暴露在溶剂蒸气(乙醇、二氯甲烷、四氢呋喃或丙酮)或100 ℃温度下放置2 min又能转换回初始状态的蓝绿色荧光, 表明化合物研磨后的样品具有气致和热致变色性能, 且展现出可逆变色性能. 对该化合物进行多次“力-溶剂蒸气刺激”和“力-热刺激”循环实验, 结果显示其具有很好的荧光可逆转换性能. 热分析结果显示化合物Ben-DCSB在194 ℃和212 ℃间存在向列相(纹影织构)的液晶态; 其热分解温度为362 ℃, 表明该化合物具有较好的热稳定性.