一种新的双偶氮染料掺杂聚合物薄膜的光致双折射及偏振全息的研究

作为一种有可能作为永久信息存储的材料,合成出一种新的双偶氮材料(BA1)。当样品被波长为532nm的光激发时,几乎大部分BA1分子从反-反态转化到顺-顺态,产生了光致双折射。因此,研究了BA1分子掺杂的PMMA薄膜的光致双折射和透过信号与入射光强度的关系。实验结果表明:透过信号强度随着泵浦光的增强而增强。通过偏振态互相平行(SS)和垂直(SP)的两束偏振光用来研究偏振全息存储,结果表明SP光栅形成的衍射信号要比SS光栅的衍射信号强很多。     

非结构子网格压力方法

纯拉氏流体力学计算失败的根源是砂漏运动和虚假涡旋,运用子网格拉氏质量与其相关的子网格密度得到子网格压力,子网格压力产生的扰动隅角力能消除这些虚假运动,以便消除困扰拉氏流体力学算法的网格畸变带来的数值计算困难.将包括子网格压力的相容流体算法推广到非结构网格,研制包括非结构子网格压力的相容流体程序,对Saltzman活塞问题进行数值模拟,从数值结果分析可知,非结构子网格压力方法能抑制虚假涡旋,消除砂漏畸变.     

离子速度成像技术研究2-溴戊烷的光解离动力学

运用离子速度成像技术研究了2-溴戊烷分子在～234 nm处的光解离动力学. 通过分析光解产物Br(²P_3/2)(简称Br)和Br(²P_1/2) (简称Br*)的速度影像,分别得到其速度分布和角度分布. Br和Br*的速度分布可以用两个高斯分布拟合,分别对应于2-溴戊烷在～234 nm处两个独立的光解离反应通道. 高能的高斯分量对应于C-Br伸缩振动模式的直接解离,低能的高斯分量对应于弯曲振动和C-Br伸缩振动耦合所导致的解离. 确定出光解离产物Br的相对量子产率为0.892,结合Br和Br*碎片的各项异性参数和溴原子的相对量子产率,讨论了³Q₀、³Q₁和¹Q₁激发态分别对产物Br和Br*的贡献. 通过对比溴代戊烷4种同分异构体光解离过程的差异,讨论了分子烷基分支化对光解机理的影响.     

Analysis of total nitrogen and total phosphorus in soil using laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy(LIBS) is used to determine the total nitrogen(TN) and total phosphorus(TP) in soil.Quantitative determinations are conducted using the line intensity of the analyte element and element concentration.Calibration models are obtained using ten samples for TN and seven samples for TP.The rest samples are used to validate the results.Strong linear correlations are obtained from the determined TN and TP concentrations.LIBS is a powerful tool for analyzing soil samples to determine nutrient elements by selecting calibration and validation samples with similar matrix composition.     

Progress in superconducting qubits from the perspective of coherence and readout

Superconducting qubits are Josephson junction-based circuits that exhibit macroscopic quantum behavior and can be manipulated as artificial atoms.Benefiting from the well-developed technology of microfabrication and microwave engineering,superconducting qubits have great advantages in design flexibility,controllability,and scalability.Over the past decade,there has been rapid progress in the field,which greatly improved our understanding of qubit decoherence and circuit optimization.The single-qubit coherence time has been steadily raised to the order of 10 to 100μs,allowing for the demonstration of high-fidelity gate operations and measurement-based feedback control.Here we review recent progress in the coherence and readout of superconducting qubits.     

Dependence of excess bismuth content in precursor sols on ferroelectric and dielectric properties of Bi3.25La0.75Ti3O12 thin films fabricated by chemical solution deposition

Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films were fabricated on Pt/Ti/SiO₂/Si(1 0 0) substrates by chemical solution deposition (CSD), and the dependence of ferroelectric and dielectric properties of the as-deposited BLT thin films on excess Bi content in precursor sols was studied. It is found that the prepared BLT thin film shows the best polarization-electric field, capacitance-voltage and dielectric constant (?_r)-frequency characteristics, when the value of excess Bi content in precursor sols is 10%. In detail, its remnant polarization (2P_r) value is 40 μC/cm², the capacitance tunability is 21% measured at room temperature under conditions of an applied voltage of 8 V and measurement frequency of 10 kHz, and the ?_r is 696 at 100 kHz frequency.     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

Characteristics of soft magnetic composite material under rotating magnetic fluxes

This paper reports the measurement of magnetic properties of the soft magnetic composite material SOMALOY^TM 500 in a square sample under different patterns of flux density with 2D magnetic excitations. The test system, principle of measurement, magnetic power loss calculation, and methods of correction for misalignment of H surface sensing coils are presented. The experimental results show that although nominally isotropic, the SOMALOY^TM 500 sample exhibits some anisotropy. The results are useful in the design and performance analysis of rotating electrical machines.     

基于AUTOSAR的点到点安全通信的实现

功能安全的概念在汽车嵌入式系统领域越发到关注,汽车开放系统架构AUTOSAR(Automotive Open System Architecture)是目前国际流行的标准软件架构,它在AUTOSAR4.1的版本中针对功能安全首次提出了点到点（End-to-End,E2E）的安全通信机制。为保证汽车各组件间的通信安全,对在AUTOSAR架构下的E2E安全通信机制进行了研究,采用E2E Profile 2的方法来实现E2E安全通信,旨在解决如何保证电子控制单元(Electronic Control Unit,ECU)之间以及ECU内部不同核之间,不同SWC（software component）之间数据的安全通信的问题。基于AUTOSAR架构,通过在电子控制单元核内通信采用E2E Protection Wrapper的通信方式,跨电子控制单元核外通信采用COM E2E Callout的通信方式实现了通信机制的搭建。通过对ECU内部及跨ECU的通信测试,表明该方法能有效的检测通信过程中的重复发送错误、CRC(Cyclic Redundancy Check)校验和错误及发送序列错误等问题。     

绿色荧光粉YAGG∶Tb,Gd用于FED的尝试

FED器件的发展迫切需要具有化学和热稳定性 ,高亮度 ,长寿命的新型荧光材料。本文合成了Gd3 +离子共掺杂的YAGG∶Tb获得了YAGG∶Tb ,Gd ,并将其用于 0～ 30 0 0V低压范围 ,对其在不同电压和电流密度下的发光特性进行了测试。结果表明 ,该种材料特性优于ZnO∶Zn并且不存在电压与电流饱和