Reversed-phase liquid chromatographic retention and membrane activity relationships of local anesthetics

The chromatographic retention and membrane activity relationships of local anesthetics were studied to address the possible mechanisms for structure specificity and inflammation-associated decrease of their effects. Five representative drugs (3 mM for each) were reacted with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine liposomes in 25 mM potassium phosphate buffer (pH 5.9-7.9, containing 100 mM NaCl and 0.1 mM EDTA) for 10 min at 37 degrees C and the membrane fluidity changes were analyzed by measuring fluorescence polarization with 1,6-diphenyl-1,3,5-hexatriene. Their capacity factors were determined on octadecyl-, octyl- and phenyl-bonded silica columns with a mobile phase consisting of 25 mM potassium phosphate buffer (pH 5.9-7.9, containing 100 mM NaCl and 0.1 mM EDTA)-methanol (30:70, v/v) at a flow rate of 1.0 ml/min and at a column temperature of 37 degrees C and diode-array detection. Mepivacaine, prilocaine, lidocaine, ropivacaine and bupivacaine fluidized membranes in increasing order of intensity, which agreed with their clinical potency. The relative degree of membrane fluidization correlated with that of retention on an octadecyl stationary phase more significantly than the other phases. Both membrane-fluidizing effects and capacity factors decreased by lowering the reaction and mobile phase pH, being consistent with the hypothesis that anesthetic potency is reduced in inflammation because of tissue acidity. Reversed-phase liquid chromatography appears to be useful for estimating the structure-specific and pH-dependent membrane-fluidizing effects of local anesthetics.     

A series of tetrahomodioxacalix[4]biscrown-n. Syntheses, crystal structures, and metal binding abilities

A series of novel tetrahomodioxacalix[4]biscrowns with crown-2, crown-3, crown-4, crown-5, and crown-6 units were synthesized. Conformations of each product are dependent on the base used and their conformation stabilities. All conformations were proven by NMR spectra and/or X-ray crystal structures. The 1,3-alternate homodioxacalix[4]biscrown-4 (4b) shows the best selectivity for K+, whereas the 1,3-alternate homodioxacalix[4]crown-5 (5) does for Cs+. Those selectivities are attributable to electrostatic interaction between the metal ion and the crown ring, as well as a pi-metal complexation. However, the C-1,2-alternate conformation does not take the metal ions regardless of the crown species as a result of steric hindrance from the methylene bridge of an ArCH2Ar unit.     

A polymer-based microfluidic device for immunosensing biochips

This paper describes the design, fabrication, and test of a PDMS/PMMA-laminated microfluidic device for an immunosensing biochip. A poly(dimethyl siloxane)(PDMS) top substrate molded by polymer casting and a poly(methyl methacrylate)(PMMA) bottom substrate fabricated by hot embossing are bonded with pressure and hermetically sealed. Two inlet ports and an air vent are opened through the PDMS top substrate, while gold electrodes for electrochemical biosensing are patterned onto the PMMA bottom substrate. The analyte sample is loaded from the sample inlet port to the detection chamber by capillary force, without any external intervening forces. For this and to control the time duration of sample fluid in each compartment of the device, including the inlet port, diffusion barrier, reaction chamber, flow-delay neck, and detection chamber, the fluid conduit has been designed with various geometries of channel width, depth, and shape. Especially, the fluid path has been designed so that the sample flow naturally stops after filling the detection chamber to allow sufficient time for biochemical reaction and subsequent washing steps. As model immunosensing tests for the microfluidic device, functionalizations of ferritin and biotin to the sensing surfaces on gold electrodes and their biospecific interactions with antiferritin antiserum and streptavidin have been investigated. An electrochemical detection method for immunosensing by biocatalyzed precipitation has been developed and applied for signal registration. With the biochip, the whole immunosensing processes could be completed within 30 min.     

Porphyrin boxes constructed by homochiral self-sorting assembly: optical separation, exciton coupling, and efficient excitation energy migration

meso-Pyridine-appended zinc(II) porphyrins Mn and their meso-meso-linked dimers Dn assemble spontaneously, in noncoordinating solvents such as CHCl3, into tetrameric porphyrin squares Sn and porphyrin boxes Bn, respectively. Interestingly, formation of Bn from Dn proceeds via homochiral self-sorting assembly, which has been verified by optical separations of B1 and B2. Optically pure enantiomers of B1 and B2 display strong Cotton effects in the CD spectra, which reflect the length of the pyridyl arm, thus providing evidence for the exciton coupling between the noncovalent neighboring porphyrin rings. Excitation energy migration processes within Bn have been investigated by steady-state and time-resolved spectroscopic methods in conjunction with polarization anisotropy measurements. Both the pump-power dependence on the femtosecond transient absorption and the transient absorption anisotropy decay profiles are directly associated with the excitation energy migration process within the Bn boxes, where the exciton-exciton annihilation time and the polarization anisotropy rise time are well described in terms of the F?rster-type incoherent energy hopping model by assuming a number of hopping sites of N = 4 and an exciton coherence length of L = 2. Consequently, the excitation energy hopping rates between the zinc(II) diporphyrin units have been estimated for B1 (48 ps)(-1), B2 (98 +/- 3 ps)(-1), and B3 (361 +/- 6 ps)(-1). Overall, the self-assembled porphyrin boxes Bn serve as a well-defined three-dimensional model for the light-harvesting complex.     

First observation of the P-wave spin-singlet bottomonium states hb(1P) and hb(2P)

We report the first observations of the spin-singlet bottomonium states h(b)(1P) and h(b)(2P). The states are produced in the reaction e(+)e(-)→h(b)(nP)π(+)π(-) using a 121.4 fb(-1) data sample collected at energies near the Υ(5S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. We determine M[h(b)(1P)]=(9898.2(-1.0-1.1)(+1.1+1.0)) MeV/c(2) and M[h(b)(2P)]=(10,259.8±0.6(-1.0)(+1.4)) MeV/c(2), which correspond to P-wave hyperfine splittings ΔM(HF)=(+1.7±1.5) and (+0.5(-1.2)(+1.6)) MeV/c(2), respectively. The significances of the h(b)(1P) and h(b)(2P) are 5.5σ and 11.2σ, respectively. We find that the production of the h(b)(1P) and h(b)(2P) is not suppressed relative to the production of the Υ(1S), Υ(2S), and Υ(3S).     

Two-electron entanglement in elliptically deformed quantum dots

Entropic entanglement measures of a two-dimensional system of two Coulombically interacting particles confined in an anisotropic harmonic potential are discussed in dependence on the anisotropy and the interaction strength. The harmonic approximation appears exact in the strong interaction limit, allowing determination of the asymptotic expression for the linear entropy. Entanglement properties are dramatically influenced by the anisotropy of the confining potential in the strong-correlation regime.     

A new type of cation‐exchange polymeric microspheres with pendant methylenethiol groups

Synthesis and characterization of the new styrene microspheres with pendant methylenethiol groups are presented. At the first stage, the polymeric matrices were obtained by the suspension–emulsion polymerization of monomers: styrene (St) with 2,3‐(2‐hydroxy‐3‐methacryloyloxypropoxy)naphthalene (NAF.DM) or (bis[4(2‐hydroxy‐3‐methacryloyloxypropoxy)phenyl]sulfide (BES.DM) or divinylbenzene (DVB). At the second stage, the modification of the sythesized matrices was performed as follows: the matrices were reacted with paraformaldehyde in the presence of hydrochloric acid forming chloromethyl derivatives. Next, by reaction with thiourea, a thiouronium salt was obtained, and then the hydrolysis with NaOH solution and acidification with HCl were carried out. Finally, microspheres with –CH₂SH groups on their surface were obtained. The –SH group content (elemental analysis), thermal properties (thermogravimetric analysis), Fourier transform infrared as well as the swelling characteristics of the functional microspheres were examined. The surface texture was also visualized by the atomic force microscopy (AFM) method. The obtained polymers were screened towards sorption of Cu(II) ions. It was found that a better correlation between the experimental Cu(II) uptake and the theoretical curves predicted by the Langmuir or Freundlich models is obtained in the case of the DVB–St–SH polymer. In the case of the BES.DM–St–SH and 2,3‐NAF–St–SH ones, the Freundlich model corresponded quite well to the experimental data. Copyright © 2013 John Wiley & Sons, Ltd.     

Food structure: Roles of mechanical properties and oral processing in determining sensory texture of soft materials

There is a desire to alter food composition to make foods healthier and at the same time not diminish sensory quality. This requires an understanding of key elements of food structure associated with texture perception. Texture, in part, is perceived during oral processing of food. Knowledge of structure–oral processing–texture interrelations could be utilized to develop or prevent specified textural attributes. Overall, the investigation of structure–oral processing–texture interrelations is just starting as a research focus. Factors including non-universal and inconsistent sensory terminology, omission of consideration for structural changes incurred by oral processes, and the lack of cross-disciplinary investigations hamper progress in this field. Consideration of these factors in future investigations on sensory texture will increase the applicability of their findings and bring us closer to understanding the contribution of food structure to sensory texture.     

Separation of five oligostilbenes from Vitis amurensis by flow‐rate gradient high‐performance counter‐current chromatography

A rapid and efficient high‐performance counter‐current chromatography (HPCCC) method was developed to separate five oligostilbenes from the roots of Vitis amurensis. An n‐hexane/ethyl acetate/methanol/water system (4:8:4:10, v/v/v/v) was selected as an optimal two‐phase solvent system of which the upper phase was used as the stationary phase and the lower phase was used as the mobile one. Partition coefficient values for the target compounds under these optimized conditions were 0.28 ( 1 , ampleosin A), 7.12 ( 2 , (+)‐g‐viniferin), 2.26 ( 3 , vitisin A), 5.38 ( 4 , wilsonol C), and 11.23 ( 5 , vitisin B). Flow‐rate gradient HPCCC (4 mL/min in 0–70 min, 8 mL/min in 70–250 min) was applied to isolate the target compounds in as high purity as possible within the shortest possible run time. Under these conditions, ampelopsin A (12.1 mg), (+)‐g‐viniferin (10.4 mg), vitisin A (2.8 mg), wilsonol C (3.2 mg), and vitisin B (37 mg) were isolated with >95% purity from 150 mg of enriched oligostilbene extract. Although the K_D of the last eluted compound, vitisin B (K_D = 11.23), was relatively large, it was eluted in 115–145 min using the two‐phase solvent system. This study shows that HPCCC is an efficient tool for the isolation and purification of natural products.