First Total Synthesis of (±)-Aiphanol

Aiphanol was isolated from the seeds of Aiphanes aculeate Willd. (Arecaceae) collected in Peru and was reported to exhibit significant inhibitory activities against cyclooxyge- nases-1 and -2. The structure of aiphanol was elucidated by spectroscopic methods as an unprecedented stilbenolignan skeleton in which a stilbene moiety is linked to a phenylpropane unit through a dioxane bridge1. In our previous works the synthetic approach to 1,4-benzodioxane lignans were achieved2. Since aiphanol…     

Yb2O3对TiO2/(O''+β'')-Sialon复相陶瓷中TiO2相变的影响

以纳米锐钛矿型TiO2粉和（O＇＋β＇）-Sialon粉为原料制备出了TiO2／（O＇＋β＇）-Sialon复相陶瓷，研究了Yb2O3添加剂对材料中锐钛矿型TiO2相变的影响，对其影响机制进行了探讨。采用XRD对材料进行物相组成和晶格参数表征。结果表明，Yb2O3对锐钛矿相变开始温度无明显影响，但对相变有显著的促进作用，随添加量的增加，其作用逐渐减弱。添加的Yb2O3同时以两种形式存在：一部分进入TiO2晶格，一部分堆积在TiO2晶粒表面。Yb^n＋进入TiO2晶格置换Ti^4＋和Yb^3＋与TiO2发生氧化还原反应促进相变，而存在于TiO2表面的Yb^3＋与TiO2相互作用形成Ti-O-Yb键而抑制相变。Yb2O3对锐钛矿相变的影响是这两方面机制共同作用的结果。     

VmTi和KnV0.04Ti担载氧化物催化剂的表征与催化燃烧柴油炭黑的性能

用FTIR和UV-Vis研究了2个系列不同V和K负载量的VOx/TiO2和K-VOx/TiO2催化剂结构的变化;并使用程序升温氧化反应技术对这两种催化剂催化柴油炭黑燃烧活性进行了考察.结果表明,当VOx/TiO2催化剂中n(V)∶n(Ti)=0.04时,催化剂活性最好(tm=389℃).添加K能显著改善VOx/TiO2催化剂活性,n(K)∶n(V)∶n(Ti)=0.04∶0.04∶1时,炭黑燃烧的反应温度最低(tm=343℃).FTIR和UV-Vis结果表明,当VOx/TiO2催化剂n(V)∶n(Ti)>0.04∶1时,催化剂表面有V2O5形成,由于V2O5氧化能力较弱,因而催化剂的活性反而降低.而当K-VOx/TiO2催化剂中n(K)∶n(V)达到1∶1时,由于形成的KVO3物种与TiO2载体有很好的协同作用,所以催化剂活性最好.     

微波辅助萃取新鲜芦荟叶中芦荟甙的研究

应用密闭微波萃取装置对芦荟中的有效成分芦荟甙进行了微波萃取研究,并利用透射电子显微镜对微波萃取机理进行了初步探讨.讨论了不同萃取剂、溶剂浓度、萃取时间和微波功率等对提取率的影响.在萃取剂为乙醇-水体系,溶剂(乙醇)体积分数为70%、萃取时间为4min及微波功率为340W的条件下,萃取效果最佳.与索氏提取及超声波萃取法相比,本法具有萃取速度快、提取率高及溶剂用量少等特点.     

Synthesis and Absorption Properties of New Na Specific Adsorbent Li（1＋x）AlxTi（2-x）（PO4）3

A new kind of adsorbent Li（1＋x）AlxTi（2-x）（PO4）3 was synthesized by solid state reaction method. The influence of the content of doping aluminum on the adsorbent Li（1＋x）AlxTi（2-x）（PO4）3 was investigated by XRD, while the morphology of powders was observed by SEM. The investigation of the adsorption properties showed that the adsorbent can selectively adsorb sodium with the adsorption capacity of 11.76 mg/g. The optimum conditions of adsorption are at pH 10.0-11.0 in LiCl solution.     

N-亚水杨基苄胺过渡金属配合物的合成、结构与抑菌性能研究(英)

N-salicylidene-benzylamineato M(Ⅱ) complexes (ZnL₂, CuL₂ and CdL₂) were synthesized, characterized and valued for antimicrobial activities against bacterial strands using the agar diffusion method. The crystal of ZnL₂ was determined by X-ray diffraction. It crystallizes in the Monoclinic system, space group C2/c with a=2.269 1(3), b=0.918 2(1), c=1.239 5(2) nm, β=117.89(2), Z=4, R₁=0.049 4, wR₂=0.138 2. The complexes were found to be active against Staphylococcus aureus and Eschierichia Coli. CCDC: 249474.     

A NOVEL ZWITTERIONIC SILANE COUPLING AGENT FOR NONTHROMBOGENIC BIOMATERIALS

A novel silane coupling agent bearing sulfobetaine group, N,N-diethyl-N-（3-sulfopropyl）-aminopropyl- trimethoxysilane （DESATS）, was first designed, synthesized and characterized. Its solution property was studied by means of dynamic light scattering. DESATS was successfully bonded onto the surface of the glass and proved by ESCA. Platelet adhesion assay in vitro indicated that the nonthrombogenicity of glass slide modified with DESATS is greatly improved.     

超微粒La-Co氧化物催化剂对柴油机尾气碳黑催化燃烧性能的研究

用有机酸络合法制备了Co3O4，NiCo2O4和LaCo2O43种催化剂。通过程序升温氧化反应(TPO)技术对这3种催化剂进行模拟柴油碳黑催化燃烧反应的活性评价。研究发现以Co3O4为活性成分的催化剂能显著降低碳黑燃烧的温度。以Ni和La部分取代Co3O4后形成的复合氧化物NiCo2O4和混合氧化物LaCo2O4能改进Co3O4的氧化活性。但是NiCo2O4不能改进碳黑在松散接触时的燃烧活性；而混合氧化物LaCo2O4由于形成了超微粒含缺陷的LaCoO3钙钛矿型结构，它具有良好的低温氧化活性和表面原子移动性，因而能显著改进碳黑在松散接触时的燃烧活性。     

稀土发光材料在固体白光LED照明中的应用

固体白光发光二极管将成为21世纪新一代的节能光源. 要实现白光发射的重要途径之一是利用稀土发光材料的荧光转换技术, 把InGaN半导体管芯发射的460 nm蓝光或400 nm近紫外光转换成白光. 分别就这两种管芯报道了我们研制的发射蓝、绿、黄、红等不同颜色的稀土发光材料： YAG：Ce, Ca1-xSrxS：Eu^2＋, Ga2S3：Eu^2＋, MGa2S4：Eu^2＋（M=Ca, Sr, Ba）, SrGa^2＋xS4＋y：Eu^2＋, （Ca1-xSrx）Se：Eu^2＋, SrLaGa3S6O：Eu^2＋, （M1, M2）10（PO4）6X2, （M1=Ca, Sr, Ba; M2=Eu, Mn; X=F, Cl, Br）, NaEu0.92Sm0.08（MoO4）2, 并报道了由它们制成的白光发光二极管的色坐标、相关色温和显色指数等参数.     

DIBUTYLTIN DILAURATE-CATALYZED DIISOCYANATE COUPLING- GRAFTING OF POLY(ETHYLENE GLYCOL) ONTO NANO-SILICA SURFACE THROUGH A ONE-STEP PROCEDURE

Grafting polymer glycols onto nano-silica surface through one-step procedure was investigated. The major characteristic of this procedure is that all the materials and reagents (silica, PEG, TDI, DBTDL, solvent) required for grafting were added simultaneously into the reaction vessel. TDI and DBTDL were used as coupling agent and catalyst, respectively.The products were characterized by FTIR, TGA, elemental analyses and TEM, giving evidence for successful grafting of PEG. Possible mechanism of this grafting was studied and two grafting processes were proposed. The process through which the grafting proceeds depends on the reaction temperature. Effect of molecular weight of PEG on grafting was also investigated.