铝掺杂表面分子印迹聚合物修饰电极检测食品中罗硝唑残留

以罗硝唑(Ronidazole,RNZ)为模板,3-氨丙基三乙氧基硅烷为功能单体,Al(Ⅲ)为路易斯酸掺杂剂,用溶胶-凝胶法制备核壳型磁性分子印迹聚合物,借助磁力作用将其修饰于磁性玻碳电极表面,制得RNZ电化学印迹传感器。以透射电镜、红外光谱、X-射线衍射及电化学方法等对该传感器进行表征,并对影响传感器性能的主要参数进行优化。结果表明,相比基于非掺杂印迹聚合物和非分子印迹聚合物的传感器,铝掺杂印迹传感器对罗硝唑具有更强的结合能力和更高的识别选择性。用差分脉冲溶出伏安法进行定量测定时,RNZ的还原峰电流与其浓度在0.05~50.0μmol/L范围内呈良好线性关系(r=0.997 3),检出限为0.015μmol/L。对牛奶、鸡蛋中RNZ的回收率为88.6%~97.0%,相对标准偏差(RSD)为2.9%~4.6%。     

火焰原子吸收光谱法测定地质样品中的砷

微量砷的测定方法主要是原子荧光光谱法;含砷量较高的样品测定,一般采用容量法和分光光度法,但这两种方法相对来说流程长,过程繁琐。实验对样品中中等含量砷的测定进行了研究,样品经酸溶后,在硝酸(1%)介质中,用火焰原子吸收光谱法在波长193.7nm处测其吸光度,结果表明吸光度与其质量浓度在0~100μg/mL呈线性关系。方法的测定相对标准偏差(RSD)为0.8%,检出限为10.5μg/g,实验操作简便,适合样品中较高含量砷的分析测定。     

铂族金属催化剂低温 CO氧化研究近期进展

CO氧化可能是多相催化领域最常见的反应,它不仅能作为探针反应研究催化剂结构、反应活性位等,而且在诸多实际过程如空气净化、汽车尾气污染物控制、燃料电池所用氢源净化等扮演重要角色.最早的 CO氧化催化剂为霍加拉特剂,其组分主要为 CuO与 MnO2混合氧化物,然而在实际应用过程中存在低温活性低、吸湿易失活等缺点.1987年, Haruta等发现湿化学法制备的氧化物负载 Au催化剂表现出非常高的低温 CO氧化活性及耐水稳定性,其 Au粒子以纳米尺度分散,进而引发了催化研究领域的“淘金热”及纳米催化研究热潮.而 CO氧化通常作为考察 Au催化剂结构性质的探针反应,也成为考核其它金属催化剂是否具有高活性的判据之一. Pt族金属上 CO氧化反应从 Langmuir等研究开始至今已有100多年,然而低温下该金属催化剂活性与 Au催化剂相比要低一个数量级.本质原因为 Pt族金属上 CO吸附较强, O2吸附与活化受到抑制,而该步骤被认为是 CO氧化的速控步,因而表现出较低的催化活性.通常 Pt族金属催化剂需要100oC以上 CO才能脱附, O2进而得以吸附.目前研究人员采取多种策略,其基本原则为削弱 Pt族金属上 CO吸附强度或者提供其它活性位供 O2吸附与活化.本综述将概括近十年来Pt族金属催化剂 CO氧化研究进展,主要总结室温甚至超低温条件下的研究成果.高活性 CO氧化催化剂主要是通过采用可还原氧化物为载体或助剂,或者改变催化剂表面性质如使表面富 OH基物种来形成. Au催化剂的研究发现,改变金属粒子尺寸极有可能获得不同寻常的催化性能,而常规的 Pt族金属催化剂研究主要是在纳米尺度.近期人们发现逐渐减小 Pt族金属粒子尺寸,从纳米到亚纳米甚至单原子时,其电荷状态逐渐呈正价形式,这有利于削弱其 CO吸附强度.此外,可通过增强金属载体间的相互作用,改变金属载体接触方式,如从核壳到交叉结联结构,构筑出更多的金属载体界面,使得 O2更容易吸附与活化或稳定更多的 OH基物种进而在此界面与吸附的 CO反应.伴随着表征技术的发展, CO氧化机理的认识也更加深入,这给催化剂的设计带来更多新的思路.(1)改变 CO吸附活化位,将 CO吸附活化位从金属转移到载体上,从而大大降低 CO吸附强度,活化的 CO物种在反应过程中容易溢流到金属载体界面处,这甚至有利于超低温度下(–100oC左右) CO氧化.(2)改变 O2活化形式. O2通常在 Pt族金属上容易以解离氧原子形式存在,通过改变载体、金属载体界面性质使得 O2以分子氧形式活化,如形成超氧或过氧物种,这有利于降低 CO氧化的活化能垒,进而提高其低温甚至超低温下 CO氧化活性.今后,设计并合成出在超低温度下能够氧化 CO的 Pt族金属催化剂将成为 CO氧化催化剂研究的重要方向之一.     

简易法制备高量子产率荧光材料及其应用

选用柠檬酸和三乙烯四胺作为原料,在相对低温下(80 ℃),制备量子产率高达78%的荧光材料。 通过紫外吸收、荧光、傅里叶变换红外光谱仪(FTIR)、核磁共振波谱仪(NMR)等技术手段对该体系进行表征。 结果表明,该荧光材料属于非典型性荧光材料,其强荧光性可能源于体系中大量羰基的聚集。 这种高量子产率材料满足制备隐形墨水的要求,在图案化、防伪和光电子设备等领域具有潜在的应用前景。     

Compounds with inhibitory activity on peristalsis from the seeds of Holarrhena antidysenterica

Eight compounds were isolated from the seeds of Holarrhena antidysenterica Wall.ex A.DC. On the basis of physico-chemical properties and spectroscopic data, holarrhenanan (1) was identified as a new compound, compounds 2–3 were isolated from H. antidysenterica for the first time, and five known compounds were also obtained. Inhibitory effects of some compounds and extracts to the intestinal peristalsis were evaluated. Results showed that the extracts and compounds 4, 6 exhibited remarkable inhibitory effects with tension inhibition rate of 32.77, 32.77% and amplitude inhibition rate of 59.51, 55.98%, respectively on the vitro rabbit intestinal peristalsis.     

One-step synthesis of porous PtNiCu trimetallic nanoalloy with enhanced electrocatalytic performance toward methanol oxidation

Pt-based alloy nanoporous structures have attracted a lot of attention because of their high activity and stability toward alcohol oxidation reactions. Especially, Pt alloying with Earth-abundant metal can lower the cost of catalyst. Here, we introduce a one-pot approach to synthesize bimetallic PtCu and Ni-doped PtCu nanoalloy with porous structure. The as-synthesized Ni-doped Pt₆₀Ni₃Cu₃₇ nanoalloys exhibit excellent electrocatalytic properties toward methanol oxidation in acidic medium. The mass activity of the as-synthesized Pt₆₀Ni₃Cu₃₇ nanoalloys is 3.6 times and 5.3 times that of Pt₅₅Cu₄₅ nanoalloys and commercial Pt black for methanol oxidation in 0.2?M methanol solution. Besides, the stability of the as-synthesized Pt₆₀Ni₃Cu₃₇ nanoalloys was much better than Pt₅₅Cu₄₅ nanoalloys and commercial Pt black. After 3600?s chronoamperometry test, the remaining values of the Pt₆₀Ni₃Cu₃₇ nanoalloys are 3.7 times and 11.0 times that of Pt₅₅Cu₄₅ nanoalloys and commercial Pt black. And it is the first time to report that small amount of Ni dopants can boost the activity and stability of PtNiCu alloys toward methanol oxidation.     

高效液相色谱-串联质谱法测定蜂蜜中9种农药残留

建立了同时测定蜂蜜中9种苯并咪唑类和新烟碱类农药的全自动固相萃取-高效液相色谱-串联质谱检测方法。蜂蜜样品用磷酸盐缓冲液（pH=7.8）溶解，超声提取，经亲水亲脂平衡（hydrophilic-lipophilic balance，HLB）固相萃取小柱净化，氮吹浓缩，定容，过滤膜后进行高效液相色谱-串联质谱分析，采用多反应监测（MRM）模式测定，以内标法定量。结果表明，在0.002~0.05 mg/L范围内9种农药呈现出较好的线性关系（相关系数r² ≥ 0.99），检出限和定量限分别为0.1~1.0 μg/kg和0.3~2.0 μg/kg。对阴性蜂蜜，在5.0、10.0、20.0 μg/kg 3个水平下分别进行加标回收试验，测出9种农药的平均回收率在78.2%~101.2%之间，相对标准偏差为1.3%~14.3%（n=6）。该方法可适用于大批量蜂蜜样品的快速准确测定。     

CO加氢制备低碳烯烃Fe基、Co基催化剂研究进展

CO加氢制备低碳烯烃是非石油路线获得烯烃的重要反应,其反应路线有直接法和间接法。直接法制备低碳烯烃具有反应路线短、能源利用率高、经济高效等优势。综述了近年来Fe基催化剂、Co基催化剂在CO直接制备低碳烯烃中的研究进展。分析认为：费托合成过程产物选择性遵循Anderson-Schulz-Flory（ASF）分布规律,助剂和载体的使用一定程度提高Fe基、Co基催化剂的低碳烯烃选择性。     

Transparent and flame retardant cellulose/aluminum hydroxide nanocomposite aerogels

Cellulose-based nanocomposite aerogels were prepared by incorporation of aluminum hydroxide (AH) nanoparticles into cellulose gels via in-situ sol-gel synthesis and following supercritical CO₂ drying. The structure and properties of cellulose/AH nanocomposite aerogels were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, ultraviolet-visible spectrometry, N₂ adsorption, thermogravimetric analysis, and micro-scale combustion calorimetry. The results indicated that the AH nanoparticles were homogeneously distributed within matrix, and the presence of AH nanoparticles did not affect the homogeneous nanoporous structure and morphology of regenerated cellulose aerogels prepared from 1-allyl-3-methylimidazolium chloride solution. The resultant nanocomposite aerogels exhibited good transparency and excellent mechanical properties. Moreover, the incorporation of AH was found to significantly decrease the flammability of cellulose aerogels. Therefore, this work provides a facile method to prepare transparent and flame retardant cellulose-based nanocomposite aerogels, which may have great potential in the application of building materials.     

Porous Organic Molecular Frameworks with Extrinsic Porosity: A Platform for Carbon Storage and Separation

The assembly of porous organic molecular frameworks (POMFs), which typically evidence common feasibility and compatibility, purification, and regeneration at practical conditions, remains a strategic challenge in modern materials science and is crucial for their favorable applications in biological, medical, and environmental realms. However, instructive knowledge of well‐organized POMF assembly by supramolecular interactions is, in general, ambiguous to date. Nevertheless, a significant advance in controlled POMF assembly has been recently achieved. This Minireview highlights these approaches, with a particular focus on the design of molecular constituents and assembly strategies. We also look beyond the field of solid‐state POMF materials into the assembly and recognition in solution, thus covering recent advances in POMFs based on material design and applications in carbon storage and separation.