2-Oxo-1,3-dioxoles as specific substrates for measurement of arylesterase activity

Various 4-arylthiomethyl-2-oxo-1,3-dioxole derivatives IIIa-o were synthesized. Their hydrolysis rates by arylesterase (EC 3.1.1.2) and cholinesterase (EC 3.1.1.8) in human serum were evaluated. Some of them were not hydrolyzed by cholinesterase, but were hydrolyzed easily by arylesterase. Among the substrates, sodium 4-((5-methyl-2-oxo-1,3-dioxol-4-yl)methylthio)benzenesulfonate (IIIg) was selected for its substrate reactivity toward arylesterase and its good water solubility. In addition, neither aliesterase (EC 3.1.1.1), acetylesterase (EC 3.1.1.6) nor cholesterol esterase (EC 3.1.1.13) hydrolyzed the compound. IIIg is thus concluded to be a specific substrate for arylesterase. Our assay system for serum arylesterase using IIIg can be readily applied to an automatic analyzer in the diagnosis of liver cirrhosis.     

Formal total synthesis of hemibrevetoxin B by a convergent strategy

Concise construction of the trans-fused 7/7/6/6 tetracyclic ether part of hemibrevetoxin B (1) was achieved by a convergent strategy based on coupling reaction of an acyl anion equivalent, reductive cyclization of an α,ε-dihydroxyketone, and introduction of a methyl group at the central ring junction by the Nicolaou method. The resultant tetracyclic ether was transformed into the known intermediate, which was already converted to 1 by the Yamamoto group, thereby completing the formal total synthesis of 1.     

Selective chemical treatment of cellular microdomains using multiple laminar streams

There are many experiments in which it would be useful to treat a part of the surface or interior of a cell with a biochemical reagent. It is difficult, however, to achieve subcellular specificity, because small molecules diffuse distances equal to the extent of the cell in seconds. This paper demonstrates experimentally, and analyzes theoretically, the use of multiple laminar fluid streams in microfluidic channels to deliver reagents to, and remove them from, cells with subcellular spatial selectivity. The technique made it possible to label different subpopulations of mitochondria fluorescently, to disrupt selected regions of the cytoskeleton chemically, to dislodge limited areas of cell-substrate adhesions enzymatically, and to observe microcompartmental endocytosis within individual cells. This technique does not require microinjection or immobilization of reagents onto nondiffusive objects; it opens a new window into cell biology.     

Structural colors in nature: the role of regularity and irregularity in the structure.

Coloring in nature mostly comes from the inherent colors of materials, but it sometimes has a purely physical origin, such as diffraction or interference of light. The latter, called structural color or iridescence, has long been a problem of scientific interest. Recently, structural colors have attracted great interest because their applications have been rapidly progressing in many fields related to vision, such as the paint, automobile, cosmetics, and textile industries. As the research progresses, however, it has become clear that these colors are due to the presence of surprisingly minute microstructures, which are hardly attainable even by ultramodern nanotechnology. Fundamentally, most of the structural colors originate from basic optical processes represented by thin-film interference, multilayer interference, a diffraction grating effect, photonic crystals, light scattering, and so on. However, to enhance the perception of the eyes, natural creatures have produced various designs, in the course of evolution, to fulfill simultaneously high reflectivity in a specific wavelength range and the generation of diffusive light in a wide angular range. At a glance, these two characteristics seem to contradict each other in the usual optical sense, but these seemingly conflicting requirements are realized by combining appropriate amounts of regularity and irregularity of the structure. In this Review, we first explain the fundamental optical properties underlying the structural colors, and then survey these mysteries of nature from the viewpoint of regularity and irregularity of the structure. Finally, we propose a general principle of structural colors based on structural hierarchy and show their up-to-date applications.     

Low temperature properties of acetonitrile confined in MCM-41

The effect of confinement on the phase changes and dynamics of acetonitrile in mesoporous MCM-41 was studied by use of adsorption, FT-IR, DSC, and quasi-elastic neutron scattering (QENS) measurements. Acetonitrile molecules in a monolayer interact strongly with surface hydroxyls to be registered and perturb the triple bond in the C[triple bond]N group. Adsorbed molecules above the monolayer through to the central part of the cylindrical pores are capillary condensed molecules (cc-acetonitrile), but they do not show the hysteresis loop in adsorption-desorption isotherms, i.e., second order capillary condensation. FT-IR measurements indicated that the condensed phase is very similar to the bulk liquid. The cc-acetonitrile freezes at temperatures that depend on the pore size of the MCM-41 down to 29.1 A (C14), below which it is not frozen. In addition, phase changes between alpha-type and beta-type acetonitriles were observed below the melting points. Application of the Gibbs-Thomson equation, assuming the unfrozen layer thickness to be 0.7 nm, gave the interface free energy differences between the interfaces, i.e., Deltagamma(l/alpha) = 22.4 mJ m(-2) for the liquid/pore surface (ps) and alpha-type/ps, and Deltagamma(alpha/beta) = 3.17 mJ m(-2) for alpha-type/ps and beta-type/ps, respectively. QENS experiments substantiate the differing behaviors of monolayer acetonitrile and cc-acetonitrile. The monolayer acetonitrile molecules are anchored so as not to translate. The two Lorentzian analysis of QENS spectra for cc-acetonitriles showed translational motion but markedly slowed. However, the activation energy for cc-acetonitrile in MCM-41 (C18) is 7.0 kJ mol(-1) compared to the bulk value of 12.7 kJ mol(-1). The relaxation times for tumbling rotational diffusion of cc-acetonitrile are similar to bulk values.     

Analytical use of a biochemical luminous membrane

Luminous membranes were prepared by immobilizing peroxidase (POD) to collagen matrix. The POD luminous membrane generated luninescence in the presence of luminol and H₂O₂, and the peroxide was determined in the concentration range 10-⁶-10-³ M by following luminescence emitted from the membrane. Glucose was determined using a luminous membrane in which POD and glucose oxidase (GOD) were coimmobilized. The luminous membranes appear to be feasible for the determination of enzyme substrates and enzyme activity.     

Conformational studies of sequential polypeptides of L-Alanine and β-Alanine

Summary In order to investigate the effect of the -alanine residue on the conformational stability of -helical poly(L-alanine), studies have been made on the conformations of sequential copolypeptides having the following repeating sequences: (L-Ala--Ala) _n , (L-Ala-L-Ala--Ala) _n , (L-Ala--Ala-L-Ala-L-Ala) _n and (L-Ala-L-Ala-X) _n , where X is D,L--amino-isobutyric acid residue. Conformations of these polypeptides were measured both in the solution and solid states by means of optical rotatory dispersion, infrared and far-infrared spectroscopies and X-ray diffractions. All the copolypeptides studied here did not give the -helix. It may be, therefore, concluded that the -alanine residue is not incorporated in but impairs the -helix of poly(L-alanine), since the hydrogen bond periodicity in the -helical chain is disturbed by the introduction of such a -amino acid as -alanine.With 5 figures and 2 tables     

Cyclopropanation and carbonyl olefination utilizing 2-(Alk-1-yn-1-yl)-2-(trialkylsilyl)-1,3-dithianes via regioselective generation of titanium alkynylcarbene complexes

Cp(2)Ti[P(OEt)(3)](2)-promoted reactions of 2-(alk-1-yn-1-yl)-2-(trialkylsilyl)-1,3-dithianes (RS)(2)C(Si)CCR with terminal olefins and carbonyl compounds produced (trialkylsilylethynyl)cyclopropanes and 1-(trialkylsilyl)alk-3-en-1-ynes, respectively. These compounds were suggest to be produced via the formation of intermediary titanium alpha-(trialkylsilylethynyl)carbene complexes Cp(2)Ti=C(R)CCSi in preference to their regioisomers, alpha-(trialkylsilyl)alkynylcarbene complexes Cp(2)Ti=C(Si)CCR.     

Novel efficient preparative method for phthalocyanines from phthalimides and phthalic anhydride with HMDS

A convenient synthesis of peripherally substituted or unsubstituted phthalocyanines having a variety of metals is described. Phthalocyanines can be obtained by heating phthalimides or phthalic anhydride with metal salts, hexamethyldisilazane, a catalytic amount of p-TsOH, and DMF at 150 degrees C.     

Lifetime regulation of the charge-separated state in DNA by modulating the oxidation potential of guanine in DNA through hydrogen bonding

A series of naphthalimide (NI)- and 5-bromocytosine ((br)C)-modified oligodeoxynucleotides (ODNs) were prepared, and their lifetimes of the charge-separated states during the photosensitized one-electron oxidation of DNA were measured. Various lifetimes of the charge-separated states were observed depending on the sequence and the incorporation sites of (br)C, and the oxidation potential of G in the (br)C:G base-pair relative to that of G in the C:G base-pair and in the GGG sequence was determined by comparing the lifetimes of the charge-separated states. The change in the cytosine C5 hydrogen to bromine resulted in a 24 mV increase in the oxidation potential of G in the (br)C:G base-pair as compared to that of G in the C:G base-pair, the value of which is comparable to a 58 mV decrease in the oxidation potential of G in the GGG sequence. These results clearly demonstrate that hole transfer in DNA can be controlled through hydrogen bonding by introducing a substituent on the cytosine.