Microwave‐improved polymerization of ϵ‐caprolactone initiated by carboxylic acids

The ring‐opening polymerization of ε‐caprolactone (ε‐CL), initiated by carboxylic acids such as benzoic acid and chlorinated acetic acids under microwave irradiation, was investigated; with this method, no metal catalyst was necessary. The product was characterized as poly(ε‐caprolactone) (PCL) by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, ultraviolet spectroscopy, and gel permeation chromatography. The polymerization was significantly improved under microwave irradiation. The weight‐average molecular weight (M_w) of PCL reached 44,800 g/mol, with a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.6, when a mixture of ε‐CL and benzoic acid (25/1 molar ratio) was irradiated at 680 W for 240 min, whereas PCL with M_w = 12,100 and M_w/M_n = 4.2 was obtained from the same mixture by a conventional heating method at 210 °C for 240 min. A degradation of the resultant PCL was observed during microwave polymerization with chlorinated acetic acids as initiators, and this induced a decrease in M_w of PCL. However, the degradation was hindered by benzoic acid at low concentrations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 13–21, 2003     

核内核子－核子非弹散射截面（Ⅰ）

在与平均场、核内核子－核子弹性散射截面以及输运方程相统一的理论框架内推导了核内核子－核子非弹散射截面的解析表达式．其数值结果能很好地重现自由非弹截面的实验值，所计算的有效非弹截面与Ｄｉｒａｃ－Ｂｒｕｅｃｋｎｅｒ的计算结果相一致．     

红外动态图像生成技术概念研究

红外动态图像生成技术的基本概念包括基本术语及其定义。为了描述红外动态图像生成技术的特性,通常采用如光源类型、光谱波段、阵列规模、空间分辨率、填充因子、时间常数、帧频、闪烁、温度范围、串扰、均匀性、发射率、辐射对比度、动态范围、温度分辨率、调制传递函数、几何畸变及最大温度和最大辐射强度等概念。介绍了描述红外动态图像生成系统性能的基本概念的定义。转换器的指标定义对于转换器的设计和性能指标的测试都有重要的意义。     

胆汁酸盐对胆红素钙沉淀过程的影响

研究了六种人胆汁主要胆汁酸盐对胆红素钙沉淀形成过程的影响。用曲线拟合法处理数据取得热力学及动力学参数。结果表明,六种胆汁酸盐都表现动力学和热力学抑制,而且抑制作用有浓度依赖关系。在一定条件下出现诱导期。虽然不同胆汁酸盐的作用结果相似,但在相同条件下,二羟基胆汁酸和三羟基胆汁酸影响程度不同。     

Systematic studies of fission fragment kinetic energy distributions by Langevin simulations

Fission fluctuation-dissipation dynamics of heavy nuclei has been studied using Langevin Monte Carlo simulations. The covariant form of the fission transport equation and the coefficients related to it are investigated. To learn about the influence of the dynamics from the ground state to the saddle point on the kinetic energy distributions we have studied various systems and compared the calculations both starting from the ground state and from the saddle point. Both the mean total kinetic energy of the fission fragments and its variances can fit with the experimental values in terms of a finite neck radius as scission condition.This work was supported by the National Natural Science Foundation of China.     

波束开角对多普勒测频结果的影响*

具有不同波束开角的声学多普勒测速设备未标定的测速结果存在偏差。基于水底椭圆散射模型研究了波束开角对声学多普勒测速结果的影响,对提高声学测速性能具有实际意义。水底椭圆散射模型下,足印上不同方位传播损失和散射强度存在差异,导致频谱不对称,测频结果偏小。利用不对称系数量化频谱不对称程度,若波束开角增大,方位不对称系数随之增大,测频偏差增大,推导了波束开角导致的测频偏差解析式。分析仿真和外场试验数据测频结果可知,不同多普勒频移下测频偏差和理论计算值相符,不同波束开角下实际测频偏差与理论公式计算的测频偏差均随波束开角增大而增大。     

高性能激光全息防伪标识特性参数测量系统

提出了一种高性能激光全息防伪标识参数的检测方法,利用同一束光在分束器分成的反射光和透射光光强度比例恒定的性质,实时探测衍射方向光强和标识入射光强值,通过一维线性扫描实现激光全息防伪标识衍射效率和信噪比的自动测量。实验数据表明：入射光强测量值相对误差不超过0．29％;衍射效率及信噪比的测量值最大相对误差分别不超过0．81％和2．0％,比第一代检测仪采用的方法测量精度提高近一倍。该方法降低了对光源稳定度的要求,大大降低了激光器的成本,有利于测量仪器的推广。     

Application of Two Novel Acoustic Emission Parameters on Identifying the Instability of Granite

The issue of monitoring and early warning of rock instability has received increasing critical attention in the study of rock engineering. To investigate the damage evolution process of granite under triaxial compression tests, acoustic emission (AE) tests were performed simultaneously. This study firstly introduced two novel parameters, i.e., the coefficient of variation (CoV) of the information entropy and correlation dimension of the amplitude data from the AE tests, to identify the precursor of the failure of granite. Then the relationship between the changes in these parameters and the stress-time curve was compared and analyzed. The results of this study show that: (1) There is a strong correlation between the CoV of the information entropy and the failure process of granite. The granite failed when the CoV curve raised to a plateau, which could be used as an indicator of rock instability. (2) The fluctuation of the correlation dimension indicates the different stages during the loading process, i.e., the initial compaction stage, the linear elastic stage, the yield stage, and the failure stage. Each stage contains a descending and a rising process in the correlation dimension curve, and the exhibited starting point or the bottom point at the correlation dimension curve could be selected as the indicator point for the rock instability. (3) The combined analysis of the Information entropy and Correlation dimension can improve the accuracy of rock instability prediction. This study provides new insights into the prediction of rock instability, which has theoretical implications for the stability of subsurface engineering rock masses.