可湿气固化的硅烷化聚醚的研究

以聚醚多元醇为原料 ,通过聚氨酯预聚体的方法制得了可湿气固化的硅烷化聚醚 ,研究了温度和时间对反应的影响 ,以及不同NCO/OH比值对固化物力学性能的影响。结果表明 ,固化后形成的弹性体的不同力学性能可通过调节不同NCO/OH的比值而获得     

Solid-state fermentation with Aspergillus niger for cellobiase production

Aspergillus niger NRRL3 was cultivated in a moist wheat bran and ground corncob solid medium supplemented with inorganic minerals for the production of cellobiase (β-1,4-glucosidase, EC 3.2.1.21). With this method, A. niger NRRL3 was able to produce a high concentration of cellobiase (215 IU/gofsolid substrate) after 96 h of incubation. Temperature and moisture content affected final cellobiase titers. The best conditions for cell obiase production from solid substrate by A. niger NRRL3 were determined to be 70% moisture and 35°C.     

反相高效液相色谱同时测定复方降压药中三组分

建立了一种反相高效液相色谱法 ,用于同时测定复方降压药中三组分。采用YWGC1 8柱 ,以甲醇 醋酸 醋酸钠缓冲液 水 ( 60∶2 0∶2 0 )为流动相 ,流速为 0 .8mL·min- 1 ,二极管阵列检测器于检测波长 2 60nm测定。硫酸双肼酞嗪、氢氯噻嗪和氨苯喋啶的线性范围分别为 0 .0 8～ 1 .1mg/mL ,0 .0 1～ 0 .30mg/mL ,0 0 3～ 0 .45mg/mL ,检测限分别为 0 0 0 6mg/mL ,0 0 0 1mg/mL ,0 0 0 1mg/mL ,已用于北京降压0号样品的测定     

氩离子激光固化环氧树脂制作三维微结构

利用激光束进行三维成像是通过逐层光引发聚合形成宏观尺度的三维实体 .最近出现的激光全息光刻技术是利用激光束的干涉产生三维全息图案 ,让感光树脂在全息图案中曝光 ,从而一次形成三维周期有序微结构 .通过调节激光干涉及波长可控制三维结构的形状及尺寸 .利用该技术获得亚微米尺度上周期性重复的三维微结构 ,可用于制作三维光子晶体 [1,2 ]等具有独特性能的聚合物材料 .本文用铁芳烃化合物与特种环氧树脂配制成阳离子型可见光固化树脂 ,在氩离子激光器产生的多束可见连续激光相干形成的空间干涉光场中曝光 ,成功地制备出亚微米量级的三…     

奎宁修饰的纳米铑簇合物催化丙酮酸乙酯对映选择性加氢反应研究

研究了奎宁作手性修饰剂修饰的负载型纳米铑簇合物催化剂 (Rh/ PVP-γ-Al2 O3)催化丙酮酸乙酯不对称氢化反应 ,在该反应中手性修饰剂奎宁不仅具有手性诱导作用 ,而且还有明显加速反应的作用 ;载体γ-Al2 O3在促进提高催化剂活性和对映选择性方面也有很重要的影响 .在优化的反应条件 [2 0℃ ,7.0 MPaH2 ,c(奎宁 ) =3 .86× 1 0 - 3mol/ L,四氢呋喃作溶剂 ]下 ,丙酮酸乙酯不对称加氢的转化频率 (TOF)为871 h- 1 ,对映选择性达到了 5 4.7% ;反应温度降低到 3℃时 ,对映选择性达到 5 9.2 % .     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

纳米晶MgSO4·5Mg(OH)2·3H2O合成与表征

纳米材料由于具有表面、体积和量子尺寸效应的特殊性而受到广泛重视[1～3]. 微米级硫氧镁晶须作为塑料添加增强和阻燃剂已有报道[4～7]. 纳米晶MgSO4*5Mg(OH)2*3H2O不仅对塑料起补强作用, 而且其粒度小, 使塑料变得更致密, 强度、韧性与防水性能大大提高. 目前纳米材料的合成方法多种多样[8～10], 本文采用水热法制得纳米硫氧镁晶粒, 产物纯度高、分散性好且粒度易控制.     

A first synthesis of thiophene dendrimers

[structure: see text] Thiophene dendrons and dendrimers were designed and synthesized using a convergent approach. Metal-mediated coupling reactions were used in the synthesis. A rational approach allowed the formation of alphaalpha, betabeta, and alphabeta linkages between the dendrons and thiophene units.     

Chemistry of borate in salt lake brine (XXXIV)

The crystallization processes of hydrated Mg-borates, boric, magnesium hydroxide and Mg-oxychloride from MgO-B₂O₃-18%MgCl₂-H₂O supersaturated solution at 20°C have been studied by kinetic method. The crystallization solid phases were characterized by X-ray powder diffraction, IR spectra, thermal analysis and chemical analysis. The liquid-solid phase diagram of thermodynamic nonequilibrium state has been given. In this phase diagram, there exist eight crystallization fields, boric acid(H₃BO₃), trigomagneborite(MgO · 3B₂O₃ · 7.5H₂O, MgO · 3B₂O₃ · 7H₂O), hungchaoite(MgO · 2B₂O₃ · 9H₂O), inderite(2MgO · 3B₂O₃ · 15H₂O), chloropinnoite(2MgO · 2B₂O₃ · MgCl₂ · 14H₂O), magnesium hydroxide(Mg(OH)₂) and magnesium oxychloride (5Mg(OH)₂ · MgCl₂ · 8H₂O).     

Edge spreading lithography and its application to the fabrication of mesoscopic gold and silver rings

A new form of edge lithography, edge spreading lithography (ESL), has been demonstrated and applied to the formation of coinage metal rings. In this process, alkanethiols are delivered from a flat PDMS stamp to the surface of a metal film through a two-dimensional array of spherical silica colloids. The thiols further spread on the metal surface, forming highly ordered SAMs in the form of a ring pattern. Following lift-off of beads, the pattern in the SAMs can be transferred into the metal film through wet chemical etching, with SAMs serving as the resist. The dimensions of the rings can be readily controlled by several parameters such as the beads diameter, the concentration of the thiol solution, and the contact time between the stamp and the silica beads.