The morphologies and optoelectronic properties of delafossite CuFeO2 thin films prepared by PEG assisted sol–gel method

Single phase delafossite CuFeO₂ thin films were synthesized by a simple sol–gel method. The influence of polyethylene glycol (PEG) on the morphology and optoelectronic properties of the films was studied by addition of 1.0 g PEG in 10 ml precursor solution. The crystal sizes of the derived CuFeO₂ films with and without addition of PEG were 49 nm, but the sample with addition of PEG (labeled as CFO-PEG) showed weaker c-axis orientation growth. The sample without addition of PEG (labeled as CFO) showed a compact surface without detectable pores and had a thickness around 50 nm. However, the sample CFO-PEG exhibited a porous surface with worm-like grains in nanometric scale and had a thickness around 310 nm. Enhanced absorbance in UV–vis region was observed for the sample CFO-PEG which might ascribe to both the thickness and porous surface. The optical direct bandgaps at near-UV were estimated to be ~3.0 and 3.38 eV for the sample CFO-PEG and CFO, respectively. Though the porous surface of CFO-PEG has improved the absorbance in UV–vis region, the resistivity has also been increased due to the homogeneous distribution of interspaces between the worm-like grains, which makes the incident photon to current efficiency of CFO-PEG lower than that of CFO.     

Facile Preparation of WO3−x Dots with Remarkably Low Toxicity and Uncompromised Activity as Co-reactants for Clinical Diagnosis by Electrochemiluminescence

The exceptional nature of WO_3−x dots has inspired widespread interest, but it is still a significant challenge to synthesize high-quality WO_3−x dots without using unstable reactants, expensive equipment, and complex synthetic processes. Herein, the synthesis of ligand-free WO_3−x dots is reported that are highly dispersible and rich in oxygen vacancies by a simple but straightforward exfoliation of bulk WS₂ and a mild follow-up chemical conversion. Surprisingly, the WO_3−x dots emerged as co-reactants for the electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ with a comparable ECL efficiency to the well-known Ru(bpy)₃²⁺/tripropylamine (TPrA) system. Moreover, compared to TPrA, whose toxicity remains a critical issue of concern, the WO_3−x dots were ca. 300-fold less toxic. The potency of WO_3−x dots was further explored in the detection of circulating tumor cells (CTCs) with the most competitive limit of detection so far.     

Palladium‐Catalyzed Asymmetric [4+3]‐Cyclization Reaction of Fused 1‐Azadienes with Amino‐trimethylenemethanes: Highly Stereoselective Construction of Chiral Fused Azepines

Summary of main observation and conclusion A Pd-catalyzed asymmetric aromative[4+3]-cyclization reaction of amino-trimethylenemethanes(TMM,1d,ip3-oles)with fused 1-azadienes has been developed.This method enables access to the synthetically importance and biologically active benzofuran fused azepines and indeno-azepines in excellent efficiency and stereoselectivity(up to 95%yield,99%ee,>19:1 dr).     

Effects of nonlinearity of restoring springs on propulsion performance of wave glider

Nonlinear Dynamics - Wave glider is an unmanned surface vehicle that can directly convert wave energy into forward propulsion and fulfill long-term marine monitoring. A previous study suggested...     

一个二进小波变换像空间的再生核函数

1 引言 小波分析是结合泛函分析、应用数学、逼近论、调和分析、广义函数论等数学知识的结晶,具有深刻的理论意义和广泛的应用范围,被称为”数学显微镜”.基于其多分辨分析的特点以及在时、频两域都具有表征信号局部特征的功能,应用它可以解决许多Fourier变换不能解决的难题,为工程应用提供了一种新的、更有效的分析工具[1],由...     

吸光度比值-导数光谱法同时测定铜(Ⅱ)和铬(Ⅲ)的研究

提出了运用吸光度比值-导数光谱法同时测定Cr(Ⅲ)与Cu(Ⅱ)含量的新方法。在pH 5.7的HAc-NaAc的缓冲溶液中,Cr3+,Cu2+与铬天青S(CAS)和溴化十六烷基三甲胺(CTMAB)可分别形成蓝色三元络合物。其摩尔吸光系数分别为2.52×105 L·mol-1·cm-1和1.01×105 L·mol-1·cm-1。Cu2+和Cr3+的浓度分别在0.08～1.2 μg·mL-1和0.05～0.52 μg·mL-1范围内符合比尔定律,其检测限分别为0.014和0.013 μg·mL-1。此方法应用于环境水中Cr(Ⅲ),Cu(Ⅱ)的同时测定,取得了满意的结果。     

复合材料失效判据有效性验证方法研究

为系统地验证复合材料失效判据计算精度和有效性范围,给出了4种材料体系、6种铺层形式的层合板在单轴、双轴载荷下的失效试验数据,用以评估复合材料失效判据在单向层合板失效包线、多向层合板初始失效包线、多向层合板最终失效包线、层合板变形及层合板的破坏特性等五个方面的预测能力。并根据验证方法和有效性评估策略对失效判据计算精度进行量化考核,给出了失效判据在五个层面上的计算精度。     

用浓度调制光谱法测量水汽辉光放电中OH和H2O的布居数变化

本文使用波长为2.8 μm的分布式反馈激光器来测量水汽辉光放电产生的物种. 使用浓度调制光谱仅观察到OH自由基和瞬态H₂O分子的吸收光谱. 吸收峰的强度和方向随解调相位而变化,但是H₂O的一个吸收峰的方向始终与其它峰相反. OH和H₂O的不同光谱取向反映了能级中粒子数量的增加或减少. 如果在放电过程中可以检测到更多的瞬态物种,则可以更好地研究H₂O的激发、电离和分解动力学. 研究表明,浓度调制光谱的解调相位关系可以用来研究分子能级的布居数变化.     

The High Energy X-ray telescope (HE) onboard the Insight-HXMT astronomy satellite

The Insight-Hard X-ray Modulation Telescope(Insight-HXMT) is a broadband X-ray and γ-ray(1-3000 ke V) astronomy satellite. One of its three main telescopes is the High Energy X-ray telescope(HE). The main detector plane of HE comprises 18 Na I(Tl)/Cs I(Na) phoswich detectors, where Na I(Tl) is used as the primary detector to measure ~ 20-250 ke V photons incident from the field of view(FOV) defined by collimators, and Cs I(Na) is used as the active shielding detector to Na I(Tl) by pulse shape discrimination. Additionally, Cs I(Na) is used as an omnidirectional γ-ray monitor. The HE collimators have a diverse FOV,i.e. 1.1°×5.7°(15 units), 5.7°×5.7°(2 units), and blocked(1 unit). Therefore, the combined FOV of HE is approximately5.7°×5.7°. Each HE detector has a diameter of 190 mm resulting in a total geometrical area of approximately 5100 cm2, and the energy resolution is ~15% at 60 ke V. For each recorded X-ray event by HE, the timing accuracy is less than 10 μs and the deadtime is less than 10 μs. HE is used for observing spectra and temporal variability of X-ray sources in the 20-250 ke V band either by pointing observations for known sources or scanning observations to unveil new sources. Additionally, HE is used for monitoring the γ-ray burst in 0.2-3 Me V band. This paper not only presents the design and performance of HE instruments but also reports results of the on-ground calibration experiments.     

CCD对高空间分辨率波前干涉检测的影响

推导并用实验验证了光强与入射波前在单位像元面积里成近似线性关系,从而得到入射波前经CCD采样后的功率谱密度（PSD）公式.根据该公式,模拟分析了影响CCD采集系统的系统传递函数的各个因素：入射波前、CCD的填充因子及CCD的曝光时间,得出了他们与系统传递函数的定性关系,并且通过实验明确CCD曝光时间对高空间分辨率波前检测不确定度的影响,为高空间分辨率干涉设计提供了理论依据.