一种基于多特征融合的新型光谱相似性测度

光谱相似性测度是高光谱遥感影像定量化分析和精细地物直接识别的基础,光谱特征的选择和刻画方式是光谱相似性测度的关键.研究表明,利用光谱的单一特征无法全面反应地物光谱间的相似性,光谱识别时需要综合考虑光谱的多种特征.本文在几何距离、相关系数和相对熵的基础上提出了一种结合多种光谱特征的新型光谱相似性测度,即光谱泛相似测度(s...     

基于压电探测判定激光支持燃烧波和爆轰波的点燃阈值

为了获得激光支持燃烧波和爆轰波的点燃阈值,采用压电探测器检测波长为1 064 nm的Nd:YAG激光作用在铝靶表面所产生的应变和冲压。从实验结果观察到压电信号的变化分为3个阶段,分别为光热弹性应变阶段、等离子体增强耦合阶段和激光支持爆轰波对靶表面的压力阶段,并从理论上研究了这3个阶段的激光与靶材料相互作用的机理,从而可以从压电信号是否发生跃变判断出激光支持燃烧波和激光支持爆轰波的点燃阈值,与其它方法所得到结果基本吻合。     

大气损耗对量子干涉雷达的影响机理

以马赫-曾德尔干涉仪作为基本模型对量子干涉雷达的探测原理进行分析,讨论了目标探测过程中光场量子态的具体演化情况,并采用宇称算符作为相位检测算符分析了量子干涉雷达的回波信号,将其与基于振幅检测的经典雷达回波信号进行比较,证明量子干涉雷达具有超越衍射极限的超分辨率特性.此外,针对大气损耗的进一步研究显示:量子干涉雷达分辨率受大气损耗影响较小,且可通过增大脉冲光子数N克服其影响;而量子干涉雷达的灵敏度则受到较大影响,尤其当两路光的损耗情况不同时,灵敏度随N的增加呈现先升高后降低的趋势;当两路光损耗情况相同时,系统灵敏度随N的增加而升高且正比于1/N~(1/2).综上,可根据探测光的大气损耗情况适当调节参考光的衰减来克服大气损耗带来的不良影响.     

A solution-adaptive lattice Boltzmann method for two-dimensional incompressible viscous flows

A stencil adaptive lattice Boltzmann method (LBM) is developed in this paper. It incorporates the stencil adaptive algorithm developed by Ding and Shu [26] for the solution of Navier–Stokes (N–S) equations into the LBM calculation. Based on the uniform mesh, the stencil adaptive algorithm refines the mesh by two types of 5-points symmetric stencils, which are used in an alternating sequence for increased refinement levels. The two types of symmetric stencils can be easily combined to form a 9-points symmetric structure. Using the one-dimensional second-order interpolation recently developed by Wu and Shu [27] along the straight line and the D2Q9 model, the adaptive LBM calculation can be effectively carried out. Note that the interpolation coefficients are only related to the lattice velocity and stencil size. Hence, the simplicity of LBM is not broken down and the accuracy is maintained. Due to the use of adaptive technique, much less mesh points are required in the simulation as compared to the standard LBM. As a consequence, the computational efficiency is greatly enhanced. The numerical simulation of two dimensional lid-driven cavity flows is carried out. Accurate results and improved efficiency are reached. In addition, the steady and unsteady flows over a circular cylinder are simulated to demonstrate the capability of proposed method for handling problems with curved boundaries. The obtained results compare well with data in the literature.     

大功率半导体激光泵浦固体激光器脉冲电源设计

介绍一种大功率半导体激光泵浦固体激光器(DPSSL)脉冲驱动电源的设计电路及其控制方法。根据半导体激光器的工作特性,采用前级电容充电电路与后级脉冲电流产生电路相结合的电路结构。由于LCC谐振电路具有软开关特性和抗负载短路、开路的能力,又能够实现对储能电容恒流充电的功能,因此其适合做为脉冲电源中储能电容的充电电路;后级脉冲电流产生电路选择大功率MOSFET做为主控器件,利用MOSFET饱和区的漏极电流可控性,通过栅极电压控制产生负载脉冲电流。控制部分采用模拟与数字相结合的控制方式,使脉冲电源控制更加灵活,引入脉冲电流指令给定积分器,可以更有效地控制脉冲电流上升过程,抑制电流过冲,提高控制精度,使脉冲驱动电源产生类似矩形波的大功率脉冲电流。搭建了脉冲功率为28 kW的实验平台,实验达到的指标：脉冲电流幅值80 A,脉冲电压350 V,脉冲宽度100 μs,重复频率100 Hz。     

基于法布里-珀罗标准具的532 nm多普勒测风激光雷达系统设计和分析

 设计了采用532 nm 种子注入稳频钇铝石榴石（YAG）激光器作为辐射源的基于四通道法布里-珀罗标准具的瑞利和米散射测风激光雷达系统。介绍了激光雷达的多普勒测量基本原理;给出了雷达系统的主要参数,重点对基于分子后向散射信号的外侧双通道标准具的带宽、自由谱间距、峰值间距等指标进行了详细设计与分析,确定了内侧双通道标准具参数;对全系统速度灵敏度、信噪比与探测距离的关系进行了理论模拟。结果表明,可以实现从边界层至对流层高低空一体化探测。     

强激光加载下高压液氘材料的电导率

液氘在高压下有丰富的电学光学性质。利用反射率和相对介电函数关系并从广义极化角度出发初步建立了计算低Z材料电导率的简易模型;在神光-Ⅱ装置上利用第九路激光冲击加载液氘材料并测量了其在强激光冲击下的高压状态参数和反射率。结合上述理论模型和实验,研究了高压下液氘的电离度和电导率。结果表明,液氘在约70 GPa时的电导率约为2.87105 (Wm)-1,已呈现出较为明显的金属电导特性。显然,冲击加载下液氘从绝缘分子态开始电离并向金属氘转变发生在更低的压强。     

Potential PDP phosphors with strong absorption around 172 nm: Rare earth doped NaLaP2O7 and NaGdP2O7

NaLaP₂O₇ and NaGdP₂O₇ powder samples are prepared by solid-state reactions at 750 and 600 °C, respectively, and the VUV-excited luminescence properties of Ln³⁺ (Ln=Ce, Pr, Tb, Tm, Eu) in both diphosphates are studied. Ln³⁺ ions in both hosts show analogous luminescence. For Ce³⁺-doped samples, the five Ce³⁺ 5d levels can be clearly identified. As for Pr³⁺ and Tb³⁺-doped samples, strong 4f-5d absorption band around 172 nm is observed, which matches well with Xe-He excimer in plasma display panel (PDP) devices. As a result, Pr³⁺ can be utilized as sensitizer to absorb 172 nm VUV photon and transfer energy to appropriate activators, and Tb³⁺-doped NaREP₂O₇(RE=La, Gd) are potential 172 nm excited green PDP phosphors. For Tm³⁺ and Eu³⁺-doped samples, the Tm³⁺-O²⁻ charge transfer band (CTB) is observed to be at 177 nm, but the CTB of Eu³⁺ is observed at abnormally low energy position, which might originate from multi-position of Eu³⁺ ions. The similarity in luminescence properties of Ln³⁺ in both hosts indicates certain structural resemblance of coordination environment of Ln³⁺ in the two sodium rare earth diphosphates.     

A sagittally focusing double‐multilayer monochromator for ultrafast X‐ray imaging applications

The development of a sagittally focusing double‐multilayer monochromator is reported, which produces a spatially extended wide‐bandpass X‐ray beam from an intense synchrotron bending‐magnet source at the Advanced Photon Source, for ultrafast X‐ray radiography and tomography applications. This monochromator consists of two W/B₄C multilayers with a 25 Å period coated on Si single‐crystal substrates. The second multilayer is mounted on a sagittally focusing bender, which can dynamically change the bending radius of the multilayer in order to condense and focus the beam to various points along the beamline. With this new apparatus, it becomes possible to adjust the X‐ray beam size to best match the area detector size and the object size to facilitate more efficient data collection using ultrafast X‐ray radiography and tomography.     

牵引变流器网侧电流谐波抑制研究

作为电力机车牵引传动系统核心部件的牵引变流器是牵引供电网的主要谐波来源之一。牵引变流器采用的单相四象限整流器,输出含有二次脉动,且工作开关频率较低,导致变流器网侧电流谐波问题严重。目前单相四象限整流器的控制脉冲产生主要采用SPWM技术。与SPWM相比,SHEPWM（特定谐波消除PWM）可以针对性的消除特定的谐波,谐波含量更小,效率更高,但其无法消除调制波中本身就存在的谐波。针对SHEPWM调制策略进行了分析设计,同时对陷波滤波器技术、PR控制策略和LC回路在降低谐波含量中的作用进行深入分析。经过合理的方案选择,有效的降低了网侧电流谐波含量,并通过MATLAB仿真实验进行了分析验证。