The Mechanism on Cyclization, Debenzylation and Oxidation of 1-[1-（Benzyloxy）-3-methylnaphthalen-4-yloxy]propan-2-one

Mansonone compounds represent a series of naturally occurring o-quinones mainly isolated from the heartwood of Mansonia Altissima1 and Ulmus Glabra2. Mansonone F contained oxaphenalene skeleton which was a relatively novel structure and rarely existed in …     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

SYNTHESIS, CHARACTERIZATION, METAL-UPTAKE BEHAVIOR OF BIS（BENZIMIDAZOLE） RESIN SUPPORTED ON EPOXIDE POLYMER

The new chelate resins, abbreviated as PNBMZs and PBBMZs based on epoxide polymer, were synthesized by polycondensation of N,N-diglycidyl-4-glycidyloxyaniline or 1,4-bis（2,3-epoxypropyl）benzene with the primary amine group of 1,3-bis（benzimidazol-2yl）propylamine （BBPAH）. The ion exchangers contain 2.71-3.23 mmol of the ligand contents per gram of the resin. Batch extraction capacities were determined for the metal chloride salts in buffer solutions in the pH range from -1 to 6.0. The chelate resins were very selective for Cu^2＋, Zn^2＋, Cd^2＋ in the presence of other divalent transition metal ions. The maximum uptake capacities of PNBMZ （synthetic molar ratio = 1：1.5） under non-competitive condition were found to be 0.94 mmol/g for Cu^2＋ at pH = 2, 1.3 mmol/g for Cd^2＋ at pH = 1 and 1.75 mmol/g for Zn^2＋ at pH = -1 respectively. While in the case of PBBMZ, it was 1.39 mmol/g for Cd〉 at pH = 1. The metal-uptake behaviors for both of them showed strong pH dependence, and their extraction capacities increase with decreasing pH. The uptake of Cu^2＋ by the resin PNBMZs at pH = 1 was found to be rather fast with t1/2 = 18 min. Metal-uptake experiments under competitive conditions also confirm that the chelate resins have a high selectivity for Cu^2＋, Zn^2＋, Cd^2＋ and the contrary pH dependence.     

配位聚合物{[Co(μ-4,4′-bpy)(4,4′-bpy)2·(H2O)2]·(4,4′-bipy)·(H2O)4·(OH)3·(Me)4N}n的晶体结构及性质

配位聚合物通常是通过某种有机配体与金属的配位几何选择以及无限网络的拓扑结构控制而形成的具有无限结构的化合物 [1] ,其结构新颖并具有不寻常的光电效应、非线性光学性能、磁性、超导及催化等诸多具有诱人应用前景的独特性能 .因此 ,近年来倍受化学家和材料学家的重视 [2～ 5] .以 Co为配位中心的配位聚合物若具有八面体构型 ,在一定条件下具有自旋转换能力 ,而且往往可与光电转换能力相关联 ,是一种潜在的新型信息存储材料 [6 ] .对于配位聚合物的形成 ,配体的选择最重要 . 4,4′-联吡啶及其衍生物是一种较好的刚性配体 ,相关的配位聚…     

Two New C—21 Steroidal Glycosides from Cynanchum aurichulatum

Two new C-21 steroidal glycosides, cynanauriculoside I and cynanauriculoside Ⅱ, were isolated from the roots of Cynanchum aurichulatum. Their structures were established using spectroscopic methods including one and two-dimensional NMR.     

DEHYDROGENATION AND AROMATIZATION OF METHANE IN THE ABSENCE OF OXYGEN OVER DOPED Mo/HZSM-5 CATALYSTS

研究了在Ｍｏ／ＨＺＳＭ－５催化剂上添加助剂以及不同的反应预处理温度对甲烷无氧脱氢芳构化反应的影响。实验结果表明，由于第二组分的添加，Ｍｏ／ＨＺＳＭ－５催化剂的活性和选择性都得到了较大程度的改善。预处理温度是影响催化剂反应性能的关键因素。Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂经过８７３Ｋ空气预处理后，甲烷在９７３Ｋ的转化率约为１０％，催化剂的稳定性也得到较大程度的提高。ＴＰＳＲ实验结果表明，Ｒｕ的加入降低了芳烃生成的温度。ＴＰＯ和ＤＴＡ实验结果表明，在Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂上可生成较多的碳物种，结合反应结果，可以认为反应过程中生成的碳物种对甲烷的无氧脱氢芳构化反应是起积极作用的     

Radiation-induced grafting of hexafluoroacetone to polyethylene

Although hexafluoroacetone is not polymerized by ionizing radiation, it is shown that γ-irradiation of hexafluoroacetone dissolved in polyethylene films produces a graft with a G value of 500 and, therefore, a kinetic chain length of 200. The effects of dose rate (0.021–3.55 Mrad/hr), temperature (21–53°C), and pressure (1.5–6.2 atm) on the graft rates have been measured. Also the effect of temperature (21–53°C) on the postirradiation grafting reaction and on the physical properties of the grafted films have been investigated. Together with solubility, diffusivity, infrared, and EPR data, the results lead to the following mechanism: The first step represents production of secondary alkyl radicals in the polyethylene by irradiation of the polymer–monomer system. The second step involves the linkage of the monomer to the radical site to form the alkoxy radical. Since it cannot add to another monomer unit, this radical abstracts a hydrogen atom from an adjacent polyethylene chain in the third step. Radical R· can then continue the kinetic chain. Radical combination and radical–impurity reactions terminate the chain. The graft may be unique in that it is the only one we have found in which a pendant group containing only one monomer unit is attached by a chain reaction. At dose rates up to 0.215 Mrad/hr, the grafting was linear with time and proportional to the 0.73 power of the dose rate at 21°C and to the 0.81 power at 53°C. The reaction is insensitive to increases in dose rate above 0.215 Mrad/hr where diffusivity measurements show the reaction to be diffusion-controlled. The rate of reaction increased 10% when the temperature was increased from 21 to 53°C. While there was significant postirradiation grafting reaction at 21°C, there was none at 53°C. The results do not fit the equations of reaction-controlled steady-state graft-polymerization kinetics. The deviations arise from an observed increase in monomer solubility in the film with increasing graft combined with low diffusivity of the monomer in polyethylene, and the presence of a radical-scavenging impurity which terminates the kinetic chain with the appearance of a relatively stable radical. EPR data suggests that the impurity is a trace of oxygen which may be produced radiolytically.     

Composite Electrode SnO2／TiO2 for Dye-Sensitized Solar Cells

Composite nanoporous electrode SnO2/TiO2 was fabricated for the dye sensitized solar cell (DSSC) with N3 (Cis-Ru). After introducing of TiO2, the open-circuit photovoltage (Voc) was higher than that of the pure SnO2 electrode, while short-circuit photocurrent (Isc) was varied with the ratio of the TiO2. Appropriate content of the TiO2 can be beneficial to the efficiency of the solar cell, and it gives negative impact on the composite electrode when the content of TiO2 is higher.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Hypoxanthine,xanthine and theobromine complexes with palladium(II) and platinum(IV) chlorides

Summary Complexes of the general types Pd(L)(LH)Cl (LH=hxH, xnH, or tbH) and Pt(L)(LH)Cl₃ (LH=hxH, or xnH) are formed by boiling under reflux 21 molar mixtures of hypoxanthine (hxH), xanthine (xnH) or theobromine (tbH) and PdCl₂ or PtCl₄ in ethanol-triethyl orthoformate. These complexes appear to be linear chain polymeric species, characterized by single monoanionic L^– ligands bridging between adjacent Pd²⁺ or Pt⁴⁺ ions. Inclusion of one terminal neutral LH and one terminal chloro-ligand completes the coordination sphere in the square-planar Pd²⁺ complexes, while the Pt⁴⁺ complexes aretrans-octahedral, involving three terminal chloro and one terminal LH ligand per platinum. The possible binding sites of the bidentate bridging L^– and the unidentate terminal LH are discussed.