A theoretical study of the dehydration and the dehydrogenation processes of alcohols on metal oxides using MOPAC

Using a semi-empirical molecular orbital method, PM3, and 2-propanol as an example, the dehydration and the dehydrogenation processes of alcohol on oxide catalysts were studied. The catalysts addressed here were four kinds of oxides (Al₂O₃, SiO₂, ZnO, CdO) whose reaction selectivities had been experimentally determined. The usual models consisting of a surface metal ion, several oxide ions and an isopropoxy group were used in calculations. For the dehydration, heats of formation of the models were calculated at each point of the process where the distance between a β-hydrogen of the group and a basic site (i.e. oxygen of the group or a surface oxide ion) or a metal ion was gradually shortened, or where the length of the C–O bond of the group was gradually increased. A reasonable dehydration mechanism was estimated by comparing activation energies calculated from the transitions of the heats of formation. The most probable dehydrogenation mechanism was also estimated in a similar way by gradually making an -hydrogen close to a surface oxide ion, the metal ion or a surface proton. It was concluded that the dehydration proceeds by scission of the C–O bond of the group after its oxygen was attacked by some electrophile on the surface and that the dehydrogenation proceeds by a mechanism in which an -hydrogen of the group was extracted by the metal ion.

Based on the dehydration mechanism thus deduced, alkoxy groups generated by adsorption of the primary, secondary and tertiary alcohols on SiO₂ were calculated in order to estimate the activation energies of their decompositions. In result, the order of the energies was found to be in good agreement with that of the decomposition rates experimentally determined by Kitahara. This agreement gives support to the validity of the mechanism deduced for the dehydration of alcohol.     

Photoemission study of Ag nanofilm grown on pseudomorphic fcc Fe(1 0 0)

An angle-resolved photoemission study for Ag nanofilm grown on pseudomorphic metastable-fcc-phase Fe(1 0 0) has been done in order to investigate in detail the quantized electronic structures. From the low-energy electron-diffraction and angle-resolved photoemission spectra, it is found that the present Ag nanofilms were grown in the direction of [1 1 1] on pseudomorphic fcc Fe(1 0 0) substrates. The angle-resolved photoemission spectra of Ag nanofilms grown on pseudomorphic fcc Fe(1 0 0) exhibit the features derived from Shockley-type surface state and additional fine-structures derived from the quantized state of Ag sp valence electron. The experimental nanofilm-thickness dependence of binding energies of these quantized states is compared with the theoretical calculation based on the phase accumulation model, taking into account the phase shifts of electron reflection at both interfaces of the Ag nanofilm. From these results, we discuss the quantized electronic structure in Ag nanofilm grown on pseudomorphic fcc Fe(1 0 0).     

Spin polarization of β-emitting fragments in high energy heavy ions on Be collisions

The degrees of nuclear spin polarization of ^8,12B, ⁹C, ¹²N, ¹³O, ^20,21F, ²³Mg, ²⁷Si and ³⁹Ca produced in the high energy ^12,13C, ¹⁶O, ²²Ne, ²⁴Mg, ²⁸Si and ⁴⁰Ca ions on Be collisions have been measured systematically, for the technical developments of the nuclear moment studies as well as the hyperfine interaction studies by means of β-NMR technique. The fragment momentum dependences were well reproduced by the simple kinematical model. Incident energy dependence and the mass dependence as well as the reaction angle dependences were qualitatively explained by the mixing of the near and far side collisions. This revised version was published online in August 2006 with corrections to the Cover Date.     

Constituent quark model for baryons with strong quark-pair correlations and non-leptonic weak transitions of hyperon

We study the roles of quark-pair correlations for baryon properties, in particular on non-leptonic weak decay of hyperons. We construct the quark wave function of baryons by solving the three body problem explicitly with confinement force and the short range attraction for a pair of quarks with their total spin being 0. We show that the existence of the strong quark-quark correlations enhances the non-leptonic transition amplitudes which is consistent with the data, while the baryon masses and radii are kept to the experiment.     

Kinetics and mechanisms of o/w microemulsion polymerization of styrene

To clarify the kinetics and mechanisms of o/w microemulsion polymerization, the o/w microemulsion polymerizations of styrene were carried out with different kinds and types of initiators and surfactants. The number of polymer particles and the molecular weight of polymer formed were not affected by the kinds and types of initiators and surfactants. The rate of polymerization with different kinds of azo-type oil-soluble initiators with widely different water-solubility was almost the same, but was much lower than that with KPS. A kinetic model proposed by us could mostly explain the kinetic behavior except for the difference in the polymerization rate with KPS and that with oil-soluble initiators.     

Anti-Obesity Effects of Matoa (Pometia pinnata) Fruit Peel Powder in High-Fat Diet-Fed Rats

Fruit peels, pericarps, or rinds are rich in phenolic/polyphenolic compounds with antioxidant properties and potentially beneficial effects against obesity and obesity-related non-communicable diseases. This study investigated the anti-obesity effects of matoa (Pometia pinnata) and salak (Salacca zalacca) fruit peel. Neither matoa peel powder (MPP) nor salak peel powder (SPP) affected the body weight, visceral fat weight, or serum glucose or lipid levels of Sprague–Dawley rats when included as 1% (w/w) of a high-fat diet (HFD). However, MPP significantly decreased the hepatic lipid level. MPP at a dose of 3% (w/w) of the HFD decreased body weight, visceral fat, and serum triglyceride levels as well as the hepatic lipid content. The inhibitory effect of MPP on hepatic lipid accumulation was not enhanced when its concentration was increased from 1% to 3% of the HFD. The anti-obesity effect of matoa was partly explained by the inhibitory effect of the matoa peel extract on fatty acid-induced secretion of ApoB-48 protein, a marker of intestinal chylomicrons, in differentiated Caco-2 cell monolayers. We identified hederagenin saponins that are abundant in MPP as potential anti-obesity substances. These results will contribute towards the development of functional foods with anti-obesity effects using the matoa fruit peel.     

Open spaces and relaxation processes in the subsurface region of polypropylene probed by monoenergetic positron beams

Open spaces and relaxation processes in the subsurface region of isotactic polypropylene were investigated by monoenergetic positron beams. From measurements of the lifetime spectra of positrons, the size of the open spaces in the subsurface region (≤ 0.2 μm) was found to be larger than that in the bulk; their differences were estimated as 20% at 295 K and 10% at 395 K. From conventional positron annihilation experiments, the glass‐transition temperatures, T_{g (upper)}and T_g(lower) were determined as 306 K and 278 K, respectively. These transition temperatures were associated with the onset temperatures of the molecular motions under the constraint imposed by crystalline regions and those free from the constraint, respectively. In the subsurface region, although the onset temperatures of the molecular motions were close to those in the bulk, the molecular motions above T_{g (lower)} were found to be suppressed. The annihilation characteristics of positrons with different implantation energies were also discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 101–107, 2000     

High‐performance poly(ethylene‐2,6‐naphthalate) fiber prepared by high‐tension annealing

A high‐tension annealing (HTA) method has been applied to zone‐annealed poly(ethylene‐2,6‐naphthalate) (PEN) fibers in order to further improve their mechanical properties. The HTA treatment was carried out under an applied tension of 428 MPa at a treating temperature of 175 °C. The applied tension was close to the tensile strength at 175 °C. The resulting HTA fiber had a birefringence of 0.492 and degree of crystallinity of 57%. Wide‐angle X‐ray diffraction (WAXD) photographs of the HTA fibers showed three reflections (010, 100, and 1 10) attributed to an α form crystal, but no (020) reflection attributed to a β form was observed in the equator. The tensile modulus and tensile strength increased with processing, and the HTA fiber had a maximum modulus of 33 GPa, a tensile strength of 1.1 GPa, and a storage modulus of 33 GPa at 25 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 61–67, 2000     

A novel approach to the characterization of end groups in styrene–methyl methacrylate copolymers by pyrolysis–gas chromatography

The end groups of styrene–methyl methacrylate (St‐MMA) copolymers polymerized radically with 2,2′‐azobisisobutyronitrile (AIBN) as an initiator, which are difficult to characterize even by NMR, were investigated by pyrolysis–gas chromatography. On the resulting pyrograms, characteristic products that formed from the end‐group moiety due to AIBN, such as 2‐cyanopropane, 2‐cyanopropen, and various compounds consisting of an isobutyronitrile group and a monomer unit, were observed together with those from the main chain, such as St and MMA monomers and various dimeric and trimeric products. The relative abundance between the recombination and disproportionation termination reactions in the copolymerization process was estimated from the relative intensities between the characteristic peaks of the end group and those of the main chain. Thus, the estimated abundance for the termination reactions suggested that the polymerization process for this particular copolymer system terminated preferentially by recombination rather than by disproportionation. Furthermore, the relative abundance between the monomer units adjacent to the chain‐end AIBN residues was estimated on the basis of the peak intensities of the products consisting of an isobutyronitrile group and either monomer unit, which reflected the penultimate neighboring structure of the end group in the polymer chain. Thus, the observed results suggested that the isobutyronitrile radical formed by the dissociation of AIBN in the initiation reaction was predominantly adjoined by St monomer rather than by MMA monomer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1880–1888, 2000