Cobalt(II), nickel(II), copper(II) and zinc(II) complexes of conjugated 3-(benzylidene/salicylidene)-β-diketones (having no enolisable γ-carbon proton) and their reactions

Transition Metal Chemistry - The synthesis and structural characterization of new metal(II) chelates (M = CoII, NiII, CuII and ZnII) of neutral conjugated bidentate β-diketone ligands, having...     

Quantification of Valerenic Acid in Valeriana jatamansi and Valeriana officinalis by HPTLC

A simple, rapid, cost-effective and accurate high performance thin layer chromatographic method has been developed for quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis which is one of the stable compounds of Valeriana officinalis and designated as a key marker compound. Valerenic acid makes substantial contribution to the sedative and spasmolytic activity of the essential oil and extract of Valeriana officinalis. Separation and quantification was achieved by HPTLC using ternary mobile phase of hexane: ethyl acetate: acetic acid (80:20:0.5 v/v) on precoated silica gel 60F₂₅₄ aluminium plates and densitometric determination was carried out after derivatization with anisaldehyde-sulphuric acid reagent at 700 nm, in absorption-reflectance mode. The calibration curves were linear in the range of (500 ng–2.5 μg). This is the first HPTLC report for the identification and quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis.     

Simulation of the Adhesion of Particles to Surfaces

The removal of micrometer and submicrometer particles from dielectric and metal films represents a challenge in postchemical mechanical polishing cleaning. Proper modeling of the adhesive force between contaminant particles and these films is needed to develop optimal solutions to postchemical mechanical polishing cleaning. We have previously developed and experimentally validated a model to describe the adhesion between spherical particles and thin films. This simulation expands previous models to characterize the adhesive interaction between asymmetrical particles, characteristic of a polishing slurry, and various films. Our simulation accounts for the contact area between particles and substrates, as well as the morphology of the surfaces. Previous models fail to accurately describe the contact of asymmetrical particles interacting with surfaces. By properly accounting for nonideal and geometry and morphology, the simulation predicts a more accurate adhesive force than predictions based upon an ideal van der Waals model. The simulation is compared to experimental data taken for both semi-ideal particle-substrate systems (polystyrene latex spheres in contact with silicon films) and asymmetrical systems (alumina particles in contact with various films). Copyright 2001 Academic Press.     

Benzyne cyclisation with carbanion activated aromatic rings1

Attempts to cyclise o-chlorophenyl benzyl ether, sulphide, sulphoxide and sulphone by treatment with KNH₂/NH₃ were unsuccessful. Similar reaction of 1-(o-chlorophenyl)-2,2-diphenylethane led to amination whereas α-(o-chlorobenzyl)phenylacetic acid gave a dihydrocoumarin. Reaction of 4- and 2-(o-chlorophenethyl)-pyridines, however, afforded products comprising benzisoquinolines and 1-pyridylbenzocyclobutenes.     

Extraction behavior of uranium(VI), plutonium(IV), zirconium(IV), ruthenium(III) and europium(III) with γ-pre-irradiated solutions of N,N′-methylbutyl substituted amides in n-dodecane

The extraction of plutonium(IV), uranium(VI), zirconium(IV), europium(III) and ruthenium(III) with -pre-irradiated n-dodecane solutions of methylbutyl substituted hexanamide (MBHA), octanamide (MBOA) and decanamide (MBDA) from 3.5M HNO₃ has been studied as a function of absorbed dose up to 184×10⁴ Gray. The distribution ratios (K_d) of uranium(VI) decreased gradually up to a dose of 50×10⁴ Gray and became almost constant thereafter, while ruthenium(III) and europium(III) were not extracted in the entire dose range studied. The K_d values of Pu(IV) decreased gradually up to 10×10⁴ Gray, for MBOA, and 30×10⁴ Gray for MBHA and MBDA and then increased up to a dose of 72×10⁴ Gray, indicating the synergistic effect of radiolytic products at higher doses. The extraction of zirconium(IV) was found to increase gradually up to 72×10⁴ Gray. However, the steep fall in K_d values of plutonium(IV), zirconium(IV) beyond a dose of 72×10⁴ Gray was atrributed to third phase formation. The radiolytic degradation of amides was monitored by quantitative IR spectroscopy and was found to follow the order MBOA>MBDA>MBHA at 184×10⁴ Gray having the amines and carboxylic acids as the main radiolytic products.     

Accurate and efficient method for predicting thermochemistry of polycyclic aromatic hydrocarbons - bond-centered group additivity

A self-consistent estimation method for the thermochemical properties of polycyclic aromatic hydrocarbons (PAH) is presented. This method is based on enthalpies of formation (DeltaHf(degrees), entropies (S(degrees)298, and heat capacities (C(degrees)p obtained from B3LYP/6-31G(d) calculations of the total energies and frequencies for 139 PAHs, including C(60) and C(70) fullerenes. The enthalpies of formation were calculated using an optimized set of homodesmic reactions given the available experimental DeltaHf(degrees) of PAHs. The theoretical entropies were compared with the existing experimental entropies, and some inconsistencies in the experimental data were identified. The estimation method presented here is a systematic extension of the widely employed atom-centered group additivity method originally proposed by Benson. This new method is based on bond-centered groups that define bonds linking two atom-centered groups and specify the size of the rings to which they belong. In addition, a term to describe the resonance energy is included. The thermochemical properties of PAHs up to C(70) fullerene are estimated with a mean average deviation of 2.8 kcal mol(-1) in DeltaHf(degrees), 0.7 cal K(-1) mol(-1) in S(degrees)298, and about 0.5 cal K(-1) mol(-1) in the C(degrees)p. This bond-centered group additivity method for the thermochemical properties of PAHs significantly expands both the range of systems that can be estimated and the accuracy of the estimations. The results of this work also allow us to assess the quality of available experimental data. For example, there are strong indications that the literature DeltaHf(degrees)of benzo[k]fluoranthene is about 10 kcal mol(-1) too low.     

Spectroscopic and biological studies on newly synthesized nickel(II) complexes of semicarbazones and thiosemicarbazones

Nickel(II) complexes, having the general composition Ni(L)2X2, have been synthesized [where L: isopropyl methyl ketone semicarbazone (LLA), isopropyl methyl ketone thiosemicarbazone (LLB), 4-aminoacetophenone semicarbazone (LLC) and 4-aminoacetophenone thiosemicarbazone (LLD) and X=Cl-, 1/2SO(4)2-]. All the Ni(II) complexes reported here have been characterized by elemental analyses, magnetic moments, IR, electronic and mass spectral studies. All the complexes were found to have magnetic moments corresponding to two unpaired electrons. The possible geometries of the complexes were assigned on the basis of electronic and infrared spectral studies. Newly synthesized ligand and its nickel(II) complexes have been screened against different bacterial and fungal growth.     

OB-fold: growing bigger with functional consistency

It was predicted that the folding space for various protein sequences is restricted and a maximum of 1000 protein folds could be expected. Although, there were about 648 folds identified, general functional features of individual folds is not thoroughly studied. We selected OB-fold, which is supposed to be an oligonucleotide and oligosaccharide binding fold to study the general functional features. OB-fold is a small beta-barrel fold formed from 5 strands connected by modulating loops. We observed consistently 2 or 3 loops on the same face of barrel acting as clamps to bind to their ligands. Depending on the ligand, which could be a single or double stranded DNA/RNA or an oligosaccharide, and their conformational properties the loops change in length and sequence to accommodate various ligands. Different classes of OB-folded proteins were analyzed and found that the functional features are retained in spite of negligible sequence homology among various proteins studied.     

Determination of 1,3-benzodioxanes in Piper mullesua by high-performance thin-layer chromatography

A new, simple, precise, and rapid high-performance thin-layer chromatographic method was developed for the determination of 6 benzodioxanes in Piper mullesua extract: 1',3'-benzodioxole-5'-(2,4,8-triene-isobutyl nonanoate), 1',3'-benzodioxole-5'-(2,4,12-triene-isobutyl tridecanoate), fargesin, sesamin, asarinin, 1',3'-benzodioxole-5'-(2,4,8-triene-methyl nonanoate). The ingredients were separated on a precoated Silica Gel 60 F254 plate with a solvent system of toluene-acetone (92 + 8). The 6 benzodioxanes were well separated and easily identified in this chromatographic system. The separated benzodioxanes were visualized by color development with a spray reagent consisting of 1 g vanillin dissolved in 100 mL H2SO4-ethanol (5 + 95, v/v). Quantitation was performed by scanning the spots and comparing the integrated areas of compounds in samples with those of standards. Recoveries from samples spiked with known amounts of the benzodioxanes were excellent. The results were comparable with those estimated by liquid chromatography.