Synthesis and spectroscopic analysis of tetraphenylporphyrinatoantimony(V) complexes linked to boron-dipyrrin chromophore on axial ligands

Tetraphenylporphyrinatoantimony(V) complexes, linked to boron-dipyrrin chromophores on axial ligands, were synthesized. The fluorescence spectra of 1a, 1b and 1c (3-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]propoxo(methoxo)antimony(V) tetraphenylporphyrin bromide (1a); 6-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]hexyloxo(methoxo)antimony(V) tetraphenylporphyrin bromide (1b); bis{3-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]propoxo}antimony(V) tetraphenylporphyrin bromide (1c)) were analyzed under the excitations of N,N′-difluorobornyl-5-dipyrrinylphenyl (Bdpy) and tetraphenylporphyrinatoantimony(V) (Sb(TPP)) chromophores. Under the irradiation of Bdpy chromophore, the excitation energy was transferred from Bdpy chromophore to the Sb(TPP) moiety at 0.13–0.40 of the quantum yields, even in a polar solvent. On the other hand, the emission of Sb(TPP) chromophores was quenched by Bdpy chromophores at rate constants of 10⁸–10⁹ s⁻¹, independent of on the solvent polarity. Under the excitation of the Bdpy chromophore of 1d (3-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]propoxo(phenyloxo)antimony(V) tetraphenylporphyrin bromide) involving both the Bdpy and the phenoxy chromophores on the axial ligands, the excited singlet state of the Sb(TPP) chromophore generated by the energy transfer from the Bdpy chromophore was quenched by the phenoxy ligand via non-radiative processes involving electron transfer. However, rapid back electron-transfer may occur because no absorption of the anion radical of Sb(TPP) was observed by nanosecond laser photolysis.     

基质影响电喷雾离子化效率的研究

着眼于液相色谱与质谱条件的匹配问题,以酸性化合物——大黄酸,碱性化合物——青藤碱为模型化合物,系统地考察了正离子和负离子模式下,6种常见的LC-MS缓冲体系对电喷雾离子化效率的基质影响。结果表明：被分析物,采用不同的溶剂体系,离子化效率有显著差异,在实际样品分析中,应根据感兴趣的化合物选择合适的缓冲溶剂体系。     

Large-scale fabrication of flexible silver/cross-linked poly(vinyl alcohol) coaxial nanocables by a facile solution approach

A new method to prepare flexible Ag/cross-linked poly(vinyl alcohol) (PVA) nanocables has been discovered for the first time by one-step in situ reduction of Ag+ and Ag+-catalyzed cross-linking of PVA chains under hydrothermal conditions.     

双亲聚合物分子印迹自组装胶束电化学传感器研究

结合大分子自组装和分子印迹技术制备了分子印迹聚合物胶束, 并通过电沉积将其固载到电极表面得到分子印迹电化学传感器. 首先以甲基丙烯酸二甲氨基乙酯(DMA)、丙烯酸羟乙酯(HEA)、丙烯酸二异辛酯(EHA)和苯乙烯(St)合成了共聚物poly(DMA-co-HEA-co-EHA-co-St), 在其侧链接枝上双键得到可光交联的双亲共聚物. 以水为沉淀剂诱发该双亲共聚物在含有对乙酰氨基苯酚的溶液中自组装, 得到印迹有对乙酰氨基苯酚的聚合物胶束, 利用动态激光光散射(DLS)和透射电镜(TEM)表征其尺寸和形貌. 最后通过电沉积技术诱导印迹胶束在金电极表面组装, 经紫外光辐照交联后, 洗脱模板分子形成分子印迹膜, 制备了对乙酰氨基苯酚分子印迹传感器, 通过循环伏安法、差分脉冲溶出伏安法研究此印迹传感器的性能. 实验结果表明, 该传感器对对乙酰氨基苯酚具有良好的选择性和灵敏度, 浓度响应线性范围为1×10^{-6 到4×10-3 mol/L, 检测限为3.3×10-7 mol/L.}     

HPLC-AFS联用测定海产品中砷的形态

建立了高效液相色谱-原子荧光分光光度法测定海产品中无机砷(As V,AsⅢ)、有机砷(DMA,MMA,AsB)含量的方法.样品经含10％(体积分数)HC1的提取液振荡提取、离心分离、二路形态分析预处理、高效液相色谱分离,用原子荧光光度计检测As(Ⅲ),DMA,MMA,As(v);四路条件(过氧化氢氧化和开启紫外灯)形态分析预处理装置处理,高效液相色谱分离,原子荧光光度计测定AsB.As(Ⅲ)线性范围为0～100.00 μg/L,r2=0.9997;DMA线性范围为0～100.00 μg/L,r2=0.9993;MMA线性范围为0～100.00 μg/L,r2=0.9990;As(Ⅴ)线性范围为0～100.00 μg/L,r2=0.999 1;AsB线性范围为0～200.00 μg/L,,r2=0.9994.3个样品加标回收率为As(Ⅲ)86.7％～89.4％,DMA 111.2％～117.0％,MMA 109.7％～111.6％,As(Ⅴ) 83.8％～90.7％,AsB 88.3％～90.4％.用该方法测定虾仁(干)5个价态测定结果的相对标准偏差为3.07％～9.93％(n=6).5个价态的检出限(S/N=2)为As(Ⅲ)0.29 μg/L,DMA 0.36 μg/L,MMA 0.27 μg/L,As(V) 0.56 μg/L,AsB l.46 μg/L.该方法适用于海产品中As(Ⅲ),DMA,MMA,As(V),AsB含量的测定.     

气相色谱法测定广藿香油中百秋李醇含量

建立了气相色谱仪测定广藿香油中百秋李醇含量的方法。用毛细管色谱柱DB-5MS（30m×O．32mm．0．25μm）,正十八烷为内标,氢火焰离子化检测器进行检测,内标法定量。百秋李醇含量在0．2-2．0mg／mL范围内,百秋李醇峰面积和内标物峰面积之比与百秋李醇质量浓度呈良好的线性关系,相关系数r=0．9997。方法的检出限为1μg／mL,加标回收率为90．0％～100．6％,测定结果的相对标准偏差为1．22％（n=6）。研究表明,本法简便、快速、测定结果准确可靠,精密度优于外标法。     

Preparation of biodegradable and thermoresponsive enzyme–polymer conjugates with controllable bioactivity via RAFT polymerization

The preparation of biodegradable and thermoresponsive enzyme–polymer bioconjugates with controllable enzymatic activity via reversible addition−fragmentation chain transfer (RAFT) polymerization and amidation conjugation reaction is presented. A new 2-mercaptothiazoline ester functionalized RAFT agent with intra-disulfide linkage was synthesized and used as chain transfer agent (CTA) to generate a biocompatible homopolymer, poly(ethyleneglycol) acrylate (polyPEG-A) and a thermoresponsive copolymer of poly(ethyleneglycol) acrylate with di(ethyleneglycol)ethyl ether acrylate [poly(PEG-A-co-DEG-A)]. These biodegradable and thermoresponsive polymers were then conjugated to the surface of glucose oxidase (GOx) under mild condition to afford the biodegradable and thermoresponsive enzyme–polymer conjugates. Cleavage of the polymer chains from the GOx surface obviously recovered the enzymatic activity. The thermoresponsive test of GOx-poly(PEG-A-co-DEG-A) revealed that the bioconjugate exhibited regular enzymatic activity fluctuation upon the temperature change below or above the lower critical solution temperature (LCST). The as-prepared enzyme–polymer conjugates were also characterized using ¹H NMR, UV–vis spectroscopy, polyacrylamide gel electrophoresis (PAGE) and biocatalytic activity tests. These smart enzyme–polymer conjugates would envision promising applications in biotechnology and biomedicine.     

Collagen-like peptides and peptide–polymer conjugates in the design of assembled materials

Collagen is the most abundant protein in mammals, and there has been long-standing interest in understanding and controlling collagen assembly in the design of new materials. Collagen-like peptides (CLPs), also known as collagen-mimetic peptides (CMPs) or collagen-related peptides (CRPs), have thus been widely used to elucidate collagen triple helix structure as well as to produce higher-order structures that mimic natural collagen fibers. This mini-review provides an overview of recent progress on these topics, in three broad topical areas. The first focuses on reported developments in deciphering the chemical basis for collagen triple helix stabilization, which we review not with the intent of describing the basic structure and biological function of collagen, but to summarize different pathways for designing collagen-like peptides with high thermostability. Various approaches for producing higher-order structures via CLP self-assembly, via various types of intermolecular interaction, are then discussed. Finally, recent developments in a new area, the production of polymer–CLP bioconjugates, are summarized. Biological applications of collagen contained hydrogels are also included in this section. The topics may serve as a guide for the design of collagen-like peptides and their bioconjugates for targeted application in the biomedical arena.     

A new method for the synthesis of 3-hydroxymethylbenzofuran

A new one-step synthesis of 3-hydroxymethylbenzofuran, based on intramolecular cyclization of 2- （methoxymethyl）-2-（2＇-methoxymethyl-4＇-methylphenyl）-butanone I under diluted hydrochloric acid in THF, was developed. The mechanism for this process was investigated via chemical equilibrium shift of tautomer in acidic conditions. The applicability of this new method was studied further in this paper.     

高温氟化盐对熔盐堆用材料的腐蚀行为研究进展

氟化物熔盐在熔盐堆(MSR)中可用作为核燃料载体和冷却剂,其独特热物理化学性质能极大提高MSR的传热效率。但MSR高温和强腐蚀条件对材料的选择使用要求非常苛刻,特别是氟化物熔盐在高温下对结构材料的腐蚀直接关系到MSR的安全运行和使用寿命,成为制约MSR应用发展的关键。本文综述了LiF-NaF-KF(Flinak)和LiF-BeF2(Flibe)熔盐与金属合金材料、碳材料及陶瓷材料腐蚀行为方面的研究进展,对材料在不同条件下腐蚀行为的机理进行了分析。研究发现,应用于MSR的高镍基合金及石墨材料存在着高温腐蚀性及机械性能差等弱点。未来新型高镍基合金、C/C复合材料及新型陶瓷材料(SiC及其复合材料、其他陶瓷材料)有望在氟化物熔盐体系中获得应用,并最终解决MSR用材料的困惑,实现MSR快速工业化发展。