Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

Protonated (protosolvated) onium ions (onlum dications)

In this short review we have shown the importance of protosolvation of onium ions (containing non-bonded pairs of electrons) in superacid catalyzed reactions. Such activation can result in unusual reactions such as aromatic alkylation with Meerwein’s salts, aliphatic nitration with nitronium ion, alkylation of saturated hydrocarbons, greatly enhanced activity of acyl cations, etc. Possibly such phenomena may be operative in hydroxylation reactions using protonated hydrogen peroxide in strong acid solutions. Even the reactivity of halonium ions could be enhanced by protosolvation. Consequently, electrophilic protosolvation may play a significant role in strogg acid catalyzed reactions.     

Toward a new generation of therapeutics

Scientific evidence in the prevention and treatment of various disorders is accumulating regarding probiotics. The health benefits supported by adequate clinical data include increased resistance to infectious disease, decreased duration of diarrhea, management of inflammatory bowel disease, reduction of serum cholesterol, prevention of allergy, modulation of cytokine gene expression, and suppression of carcinogen production. Recent ventures in metabolic engineering and heterologous protein expression have enhanced the enzymatic and immunomodulatory effects of probiotics and, with time, may allow more active intervention among critical care patients. In addition, a number of approaches are currently being explored, including the physical and chemical protection of cells, to increase probiotic viability and its health benefits. Traditional immobilization of probiotics in gel matrices, most notably calcium alginate and κ-carrageenan, has frequently been employed, with noted improvements in viability during freezing and storage. Conflicting reports exist, however, on the protection offered by immobilization from harsh physiologic environments. An alternative approach, microencapsulation in “artificial cells,” builds on immobilization technologies by combining enhanced mechanical stability of the capsule membrane with improved mass transport, increased cell loading, and greater control of parameters. This review summarizes the current clinical status of probiotics, examines the promises and challenges of current immobilization technologies, and presents the concept of artificial cells for effective delivery of therapeutic bacterial cells.     

Use of kinetic plots for relative assessment of reactor throughput and energy consumption

The progress of high temperature processes is generally described in terms of variation of the degree of conversion () with time (t). The present paper outlines a procedure for making use of-t plots for comparative assessment of productivity and energy requirements for a test system with respect to a reference, on the basis of some simplifying assumptions. It is assumed that the throughput is inversely proportional to reaction time as in the case of batch reactors and plug flow reactors. It is also assumed that the energy requirement is a simple function of process temperature. The principles outlined is illustrated with reference to some laboratory data for reduction of iron oxide by coal.The authors wish to thank Prof. P. R. Rao, Director National Metallurgical Laboratory, Jamshedpur, India, for providing facilities for experimental work and for according permission to publish this work.     

A gamma-spectrometric method for the determination of plutonium isotope ratios

A gamma-spectrometric method using an intrinsic high resolution germanium detector has been developed for the determination of isotope ratios of plutonium from samples in solution form. The method is based on the assay of low energy gamma-rays of²³⁸Pu,²³⁹Pu,²⁴⁰Pu and²⁴¹Pu and does not require the use of branching intensities or the knowledge of detection efficiencies for different gamma rays. Since low energy gamma-rays are used, the effect of²⁴¹Am has also been studied. It is found that results are not affected up to 0.5 wt% of²⁴¹Am in plutonium samples. An accuracy of 3% is achievable in the determination of²⁴⁰Pu/²³⁹Pu and²⁴¹Pu/²³⁹Pu atom ratios as demonstrated by carrying out measurements on isotopic standards of plutonium.     

HPLC separation of hydrogenated derivatives of buckminsterfullerene

Summary The effect of composition and flow rate of the mobile phase on the HPLC separation of hydrogenated buckminsterfullerene (C₆₀H_n n=2–38) was investigated on BuckySep column. Toluene was used as the basic solvent and hexane, heptane, cyclohexane, THF, acetonitrile, acetone, ethanol and 2-propanol as co-solvents. The fraction of co-solvents was varied 10–80%, and the flow rate 1–0.1 mL min⁻¹. Toluene-acetonitrile 65∶35 and toluene-acetone 50∶50 provided the best separation. Under the best conditions complete separation of C₆₀H₂ and almost complete separation of the four most abundant isomers of C₆₀H₄ were achieved. Separation of derivatives with higher hydrogen content was very poor. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

The effects of gamma irradiation on the microbiological, physical and sensory qualities of diced tomatoes

Diced Roma tomatoes were treated with gamma irradiation and evaluated for changes in microbial, physical, chemical and sensory properties. Dosages for Trial 1 were 0.0, 0.39, 0.56 and 1.82 kGy and in Trial 2, 0.0, 0.50, 1.24 and 3.70 kGy. Irradiation at 3.70 kGy resulted in no aerobic populations through day 12 and significantly fewer colonies through day 15 whereas yeast and mold populations experienced a 2 log reduction through day 12. Color, titratable acidity, and °Brix were not significantly affected by irradiation. Tissue firmness decreased with increasing dose but not with storage time. Treatment with 3.7 kGy decreased firmness by 50% and 20% with 0.5 kGy, however, the reduced firmness induced by 0.50 kGy was undetected by a 9 member trained sensory panel. A significant (p0.05) inverse correlation between changes in texture and water-soluble pectin (WSP) was determined while total pectin remained relatively constant and oxalate soluble pectin content decreased slightly with irradiation dose. The significant inverse correlation between the loss of firmness and WSP indicates that the changes in WSP play an important role in the tissue softening of tomatoes, This study indicates that irradiation at 0.5 kGy can reduce microbial counts substantially to improve microbial shelf life without adverse effects on sensory qualities.     

Phenomenological renormalization of free nucleon-nucleon interaction

Low-lying spectra of⁶Li,¹⁸F,¹⁸O,⁴²Sc,⁴²Ca,⁵⁸Ni and⁹²Zr are studied with Sussex matrix elements (SME) and their central, spin-orbit and tensor components. It is observed that major contribution to level energies comes from the central part, while the tensor part provides the finer details of spectra, particularly forT=0 levels. The spin-orbit part does not make any appreciable contribution to level energies. A phenomenological renormalization of the SME is carried out to improve the agreement with the experimental results. It turns out that some of the low-lyingT=0 levels can be satisfactorily described if the SME in the³S₁ relative state are made (1+α) times their bare interaction value, whereα is a constant to be determined from a comparison with experimental level energies. Similarly, forT=1 levels, better agreement with the experimental results is obtained if aδ-function-plus-quadrupole interaction is added to the SME.