Synthesis of AS1411-Aptamer-Conjugated CdTe Quantum Dots with High Fluorescence Strength for Probe Labeling Tumor Cells

In this paper, we report microwave-assisted, one-stage synthesis of high-quality functionalized water-soluble cadmium telluride (CdTe) quantum dots (QDs). By selecting sodium tellurite as the Te source, cadmium chloride as the Cd source, mercaptosuccinic acid (MSA) as the capping agent, and a borate-acetic acid buffer solution with a pH range of 5–8, CdTe nanocrystals with four colors (blue to orange) were conveniently prepared at 100 °C under microwave irradiation in less than one hour (reaction time: 10–60 min). The influence of parameters such as the pH, Cd:Te molar ratio, and reaction time on the emission range and quantum yield percentage (QY%) was investigated. The structures and compositions of the prepared CdTe QDs were characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, selective area electron diffraction, and X-ray powder diffraction experiments. The formation mechanism of the QDs is discussed in this paper. Furthermore, AS1141-aptamer-conjugated CdTe QDs in the U87MG glioblastoma cell line were assessed with a fluorescence microscope. The obtained results showed that the best conditions for obtaining a high QY of approximately 87 % are a pH of 6, a Cd:Te molar ratio of 5:1, and a 30-min reaction time at 100 °C under microwave irradiation. The results showed that AS1141-aptamer-conjugated CdTe QDs could enter tumor cells efficiently. It could be concluded that a facile high-fluorescence-strength QD conjugated with a DNA aptamer, AS1411, which can recognize the extracellular matrix protein nucleolin, can specifically target U87MG human glioblastoma cells. The qualified AS1411-aptamer-conjugated QDs prepared in this study showed excellent capabilities as nanoprobes for cancer targeting and molecular imaging.     

Analysis of optoelectronic properties of TiO_2 nanowiers/Si heterojunction arrays

The optoelectronic properties of n-TiO2NW/p-Si heterojunction fabricated by depositing TiO2 nanowires on a p-Si substrate are studied. Under excitation at a wavelength of 370 nm, the TiO2 nanowires produce a light emission at 435 nm due to the emission of free excitons. The I-V characteristics are measured to investigate the heterojunction effects under the dark environment and ultraviolet （UV） illumination, n-TiOzNW/p-Si has a p-n junction formed in the n-TiOz/p-Si beterojunction. TiO2NW/Si photodiode produces a pbotocurrent larger than dark current under UV illumination. It is observed that UV photons are absorbed in TiO2 and the heterojunction shows a 0.034-A/W responsivity at 4-V reverse bias.     

Synthesis of Novel 1,2,3-Triazole-dihydro[3,2-c]chromenones as Acetylcholinesterase Inhibitors

A novel series of 1,2,3-triazole-dihydro[3,2-c]chromenone derivatives were synthesized through an efficient three-step reaction starting from 4-hydroxybenzaldehyde. All the newly synthesized compounds were characterized by infrared and NMR spectroscopy as well as elemental analysis and evaluated for their acetylcholinesterase inhibitory activity.     

SYNTHESIS,REACTIVITY AND CONFORMATION OF 10,11-DIHYDRODIBENZO-[b,f]PHOSPHEPIN AND DIBENZO[b,f]PHOSPHEPIN DERIVATIVES. PHOSPHORUS ANALOGUES OF IMINOBIBENZYL ANTIDEPRESSANTS

Abstract

Derivatives of the novel dibenzo[b,f]phosphepin system are prepared from 10,11-dihydro-5-phenyl-5H-bibenzo[b,f]phosphepin 5-oxide (2). New members in the 10,11-dihydro-5H-dibenzo[b,f]phosphepin series, including phosphorus analogues (7, 10) of the andidepressant drug imipramine (30), are also reported. Products of nucleophilic substitution at tetrahedral phosphorus in 2 appear to be determined by the relative apicophilicity of the nucleophile. Conformational analysis based on ¹H NMR data suggests folded (“butterfly”) conformation for the tricyclic compounds. The twisted boat conformation of the central ring in the 10,11-dihydro compounds bears a pseudo-equatorial P[dbnd]O oxygen or a P[dbnd]S sulfur, in solution. Symmetric AA‘BB’ spin systems are found in 4,5 and 7, and their solution conformations appear to be similar to those of analogous 10,11-dihydrodibenzo[b,f]azepine derivatives. The interaction of some compounds with NMR shift reagents and their mass spectral fragmentations are discussed.     

Statistical mechanics of two-dimensional shuffled foams: prediction of the correlation between geometry and topology

We propose an analytical model for the statistical mechanics of shuffled two-dimensional foams with moderate bubble size polydispersity. It predicts without any adjustable parameters the correlations between the number of sides n of the bubbles (topology) and their areas A (geometry) observed in experiments and numerical simulations of shuffled foams. Detailed statistics show that in shuffled cellular patterns n correlates better with √A (as claimed by Desch and Feltham) than with A (as claimed by Lewis and widely assumed in the literature). At the level of the whole foam, standard deviations Δn and ΔA are in proportion. Possible applications include correlations of the detailed distributions of n and A, three-dimensional foams, and biological tissues.     

Unidirectional invisibility induced by PT-symmetric periodic structures

Parity-time (PT) symmetric periodic structures, near the spontaneous PT-symmetry breaking point, can act as unidirectional invisible media. In this regime, the reflection from one end is diminished while it is enhanced from the other. Furthermore, the transmission coefficient and phase are indistinguishable from those expected in the absence of a grating. The phenomenon is robust even in the presence of Kerr nonlinearities, and it can also effectively suppress optical bistabilities.     

Synergistic effect of graphene oxide nanoplatelets and cellulose nanofibers on mechanical,thermal, and barrier properties of thermoplastic starch

In recent years, because of the limited availability of oil resources and the increasing concerns regarding environment protection, much attention has been drawn to produce packaging films based on degradable biopolymers instead of synthetic polymers. On the other hand, because of the high costs of oil extraction, raw materials and film production, and disposing of the waste products of synthetic films, the need to replace these films with less pollutant and more cost‐effective films is growing globally. In this study, to answer the need for replacing synthetic polymer films, nanocomposite films based on thermoplastic starch reinforced with cellulose nanofibers and graphene oxide nanoplatelets were produced and characterized. The results implied that the synergistic effect of cellulose nanofibers and graphene oxide nanoplatelets has played an important role in improving the mechanical properties of the films. The results showed that with the addition of cellulose nanofibers and graphene oxide nanoplatelets, the tensile strength and elastic modulus of starch film were increased from 3 and 32 MPa to 13 and 436 MPa, which corresponds to 438% and 1435% improvement, respectively. In addition, the oxygen permeability resistance and the water vapor transmission for samples containing 3 wt% of graphene oxide nanoplatelets was decreased by 78% and 30% compared with the thermoplastic starch film, respectively. The permeability coefficient of the samples containing 3 wt% graphene oxide nanoplatelets for oxygen, nitrogen, and carbon dioxide have proved to be 0.051, 0.054, and 0.047 barrer, which shows that these films can perform well as packaging films.     

Selective determination of ultra trace amounts of gold by graphite furnace atomic absorption spectrometry after dispersive liquid-liquid microextraction

A simple, rapid and sensitive method is proposed for selective determination of ultra trace amounts of gold from different samples. The method is based on highly efficient separation and pre-concentration of gold by dispersive liquid-liquid microextraction of gold followed by its determination with graphite furnace atomic absorption spectrometry. The pre-concentration procedure results in quantitative extraction of gold by victoria blue R from a 10-mL sample into fine droplets of chlorobenzene, with a sedimented volume of 25 microL. Then, 20 microL of 0.04% Pd(NO3)2, as chemical modifier, followed by 10 microL of the sedimented phase were consecutively pipetted into the same auto-sampler device and the content is injected into the graphite tube and the gold content is determined by graphite furnace atomic absorption spectrometry. After optimizing the extraction conditions and instrumental parameters, a pre-concentration factor of about 388 is obtained for the system. The analytical curve is linear in a concentration range of 0.03-0.5 ng mL(-1). The detection limit and relative standard deviation are 0.005 ng mL(-1) and 4.2%, respectively. The method was successfully applied to the extraction and determination of gold in tap water and silicate ore samples.     

A new ab initio ground-state dipole moment surface for the water molecule

A valence-only (V) dipole moment surface (DMS) has been computed for water at the internally contracted multireference configuration interaction level using the extended atom-centered correlation-consistent Gaussian basis set aug-cc-pV6Z. Small corrections to these dipole values, resulting from core correlation (C) and relativistic (R) effects, have also been computed and added to the V surface. The resulting DMS surface is hence called CVR. Interestingly, the C and R corrections cancel out each other almost completely over the whole grid of points investigated. The ground-state CVR dipole of H(2) (16)O is 1.8676 D. This value compares well with the best ab initio one determined in this study, 1.8539+/-0.0013 D, which in turn agrees well with the measured ground-state dipole moment of water, 1.8546(6) D. Line intensities computed with the help of the CVR DMS shows that the present DMS is highly similar to though slightly more accurate than the best previous DMS of water determined by Schwenke and Partridge [J. Chem. Phys. 113, 16 (2000)]. The influence of the precision of the rovibrational wave functions computed using different potential energy surfaces (PESs) has been investigated and proved to be small, due mostly to the small discrepancies between the best ab initio and empirical PESs of water. Several different measures to test the DMS of water are advanced. The seemingly most sensitive measure is the comparison between the ab initio line intensities and those measured by ultralong pathlength methods which are sensitive to very weak transitions.     

Colorimetric aptamer based assay for the determination of fluoroquinolones by triggering the reduction-catalyzing activity of gold nanoparticles

The authors describe a colorimetric assay for the detection of fluoroquinolones (FQs). It is based on the use of gold nanoparticles (AuNPs) modified with complementary DNA strands and analyte-specific FQ-binding aptamers. The modified AuNPs possess enzyme-like activity that can catalyze the reduction of nitrophenol by NaBH₄. In the absence of ciprofloxacin, the flower-shape coating on the AuNPs prevents the reduction of yellow 4-nitrophenol. In the presence of ciprofloxacin, the DNA/aptamer flower leaves on the AuNPs and the AuNPs can exert their catalytic activity. This results in a color change from yellow to colorless. The assay is highly selective for FQs, fast (1 h), and has a limit of detection as low as 1.2 nM in case of ciprofloxacin. It was successfully applied to the determination of ciprofloxacin in spiked water, serum and milk samples to give LODs of 1.3, 2.6 and 3.2 nM, respectively.