Design of an MMIC Transversal Filter in MM-Wave Bands

A novel MMIC transversal filter structure using multiple-coupled-line directional couplers and its design method are proposed. There is a critical drawback in fabricating MMIC transversal filters because the length of the conventional transversal filter is much longer than the width. In order to solve this structural problem, a novel transversal filter which can easily be realized in MMIC type is proposed. The usefulness of the proposed transversal filter for MMIC applications is verified by the 3D full-wave analysis. The analysis results show the characteristics of low insertion loss, improved selectivity, and little bandwidth shrinkage.     

Association of DNA-dependent protein kinase with hypoxia inducible factor-1 and its implication in resistance to anticancer drugs in hypoxic tumor cells

Tumor hypoxia contributes to the progression of a malignant phenotype and resistance to ionizing radiation and anticancer drug therapy. Many of these effects in hypoxic tumor cells are mediated by expression of specific set of genes whose relation to therapy resistance is poorly understood. In this study, we revealed that DNA-dependent protein kinase (DNA-PK), which plays a crucial role in DNA double strand break repair, would be involved in regulation of hypoxia inducible factor-1 (HIF-1). HIF-1beta-deficient cells showed constitutively reduced expression and DNA-binding activity of Ku, the regulatory subunit of DNA-PK. Under hypoxic condition, the expression and activity of DNA- PK were markedly induced with a concurrent increase in HIF-1alpha expression. Our result also demonstrated that DNA-PK could directly interact with HIF-1, and especially DNA-PKcs, the catalytic subunit of DNA-PK, could be involved in phosphorylation of HIF-1alpha, suggesting the possibility that the enhanced expression of DNA- PK under hypoxic condition might attribute to modulate HIF-1alpha stabilization. Thus, the correlated regulation of DNA-PK with HIF-1 could contribute to therapy resistance in hypoxic tumor cells, and it provides new evidence for developing therapeutic strategies enhancing the efficacy of cancer therapy in hypoxic tumor cells.     

Micro-ionization acidity constants for tetracyclines from fluorescence measurements

The pH vs. fluorescence intensity profiles for a number of tetracyclines are investigated. Fluorescence is obtained in alkaline solutions and is associated with the ionized form of the phenolic-β-diketone site of these molecules. The shape of the pH vs. fluorescence intensity profiles is best explained by representing the acid-base equilibria in solution by a micro-ionization scheme. In combination with measurements made on model compounds in which the dimethylammonium site was either blocked or removed, it proved possible to estimate values for the micro-ionization constants in aqueous solution; pk₁₃ values of 7.82, 7.85 and 7.04 were obtained for tetracycline, oxytetracycline and demethylchlortetracyline, respectively.     

Measurement of the cumulative particle size distribution of microcrystalline cellulose using near infrared reflectance spectroscopy

The cumulative particle size distribution of microcrystalline cellulose, a widely used pharmaceutical excipient, was determined using near infrared (NIR) reflectance spectroscopy. Forward angle laser light scattering measurements were used to provide reference particle size values corresponding to different quantiles and then used to calibrate the NIR data. Two different chemometric methods, three wavelength multiple linear regression and principal components regression (three components), were compared. For each method, calibration equations were produced at each of eleven quantiles (5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 95%). NIR predicted cumulative frequency particle-size distributions were calculated for each of the calibration samples (n = 34) and for an independent test set (n = 23). The NIR procedure was able to predict those obtained via forward angle laser light scattering.     

Distribution of 14C and 3H in low level radioactive wastes generated by wet waste streams from pressurized water reactors

Summary It is impossible to detect ¹⁴C and ³H by direct methods such as γ-spectroscopy because they are pure b-emitters and thus they are classified as hard to measure nuclides (HTM). In this paper the analysis results of ¹⁴C and ³H in the low level radioactive wastes (LLWs), including spent ion exchange resin, evaporated bottom and sludge are presented. The LLWs were generated by three nuclear power plants (NPPs), in Korea all with pressurized water type reactors (PWRs). A simultaneous separation procedure for ¹⁴C and ³H in LLWs was established by wet oxidation-acid stripping. A liquid scintillation analyzer was used for the measurement of ¹⁴C and ³H. It was found that the recovery of ¹⁴C and ³H was 82-99 and 78-103%, respectively, by wet oxidation-acid stripping with diluted standard solutions. At the lowest injection of ¹⁴C and ³H, i.e., at 1.44 Bq for ¹⁴C and 1.22 Bq for ³H, the minimum detectable activity (MDA) of ¹⁴C and ³H was calculated as 0.88 and 0.78 Bq/g, respectively, for the minimum allowable sample weight, using wet oxidation and 16 wt% H₂SO₄ acid. By the wet oxidation-16 wt% H₂SO₄ stripping method no interfering nuclides were detected in the trapping solution of ¹⁴CO₂ and the distillate of ³H. The activity concentration range of ¹⁴C in the analyzed samples, i.e., spent ion exchange resin, evaporated bottom and sludge, was 0.17-110,000, 8.4-1380 and 0.1-10,006 Bq/g, respectively, and that of ³H in the same was from no detectable to 769, 134-14,383 and 0.7-4820 Bq/g, respectively.     

A rapid quantitative assay of intact paracetamol tablets by reflectance near-infrared spectroscopy

Near-infrared (NIR) reflectance spectroscopy was used to determine rapidly and non-destructively the content of paracetamol in bulk batches of intact Sterwin 500 mg tablets by collecting NIR spectra in the range 1100-2500 nm and using a multiple linear regression calibration method. The developed NIR method gave results comparable to the British Pharmacopoeia 1993 UV assay procedure, the standard errors of calibration and prediction being 0.48% and 0.71% m/m, respectively. The method showed good repeatability, the standard deviation and coefficient of variation for six NIR assays on the same batch on the same day being 0.14 and 0.16% m/m, respectively, while measurements over six consecutive days gave 0.31 and 0.36% m/m, respectively. Applying the calibration to a parallel test set gave a mean bias of -0.22% and a mean accuracy of 0.45%. The developed method illustrates how the full potential of NIR can be utilised and how the ICH guidelines which recommend the validation of linearity, range, accuracy and precision for pharmaceutical registration purposes can be applied. Duplicate determinations on bulk batches could be performed in under 2 min, allowing the potential use of the method on-line for real time monitoring of a running production process.     

Application of transmission near-infrared spectroscopy to uniformity of content testing of intact steroid tablets

Transmission near-infrared (NIR) spectroscopy was used for the rapid and non-destructive determination of the content of a hormone steroid in single intact tablets. Tablets produced for clinical trial purposes containing 5, 10, 15, 20 and 30 mg (2.94, 5.88, 8.82, 11.76 and 17.64% m/m, respectively) were used to develop calibration models without the need to specially prepare any out of specification tablets. Reference values for the individual tablets used in the NIR calibration models and test set were measured by reversed-phase high performance liquid chromatography (HPLC). Partial least squares regression using standard normal variate transformed second-derivative spectra over the range 800 to 1040 nm gave the optimum calibration model with a standard error of calibration of 0.52 mg per tablet. Measurements of an independent test set gave comparable results (standard error of prediction 0.31 mg per tablet). Measurement errors for a single tablet (RSD < 2.5% for a given active level) were sufficiently small to allow the procedure to be applied to pharmacopoeial uniformity of content testing of batches of these tablets and permitted the non-destructive testing of 30 tablets in under 20 min as compared to 6 h by HPLC.     

Simultaneous determination of niflumic acid and its prodrug, talniflumate in human plasma by high performance liquid chromatography

A high-performance liquid chromatographic (HPLC) method has been developed for the simultaneous determination of niflumic acid and its prodrug, talniflumate, in human plasma. Niflumic acid and talniflumate were eluted isocratically with methanol-water (73:27, v/v, adjusted to pH 3.5 by acetic acid) at a fl ow rate of 1 mL/min. Indomethacin was used as an internal standard. Signals were monitored by an UV detector at 288 nm. Retention times of indomethacin, niflumic acid and talniflumate were 5.9, 7.2 and 13.5 min, respectively. Calibration plots were linear over the range 50-5000 ng/mL for niflumic acid and 100-5000 ng/mL for talniflumate. The limits of quantitation were 50 ng/mL for niflumic acid and 100 ng/mL for talniflumate. The intra- and inter-day relative standard deviations (RSD) of niflumic acid and talniflumate were less than 10% and the accuracies were higher than 90%. This method is rapid, sensitive and reproducible for the determination of niflumic acid and talniflumate in human plasma.     

Synthesis of iron oxide nanoparticles in a polyimide matrix

A monolayer of gamma-Fe(2)O(3) nanoparticles embedded in a polyimide (PI) matrix was fabricated by oxidizing an Fe metal film between two PI precursor layers. There was a critical Fe thickness ( approximately 7 nm) above which a continuous layer of gamma-Fe(2)O(3) film was formed in the PI film. Below the critical Fe thickness, the oxide film broke up into fine particles whose size was approximately 8 nm with narrow size distribution. It was further shown that these nanoparticles could have metallic cores, surrounded by an oxide layer. This method offers a unique way of covering a large surface area with fine magnetic oxide nanoparticles for potential application in high-density data-storage media.