Electron tomography of Nafion ionomer coated on Pt/carbon black in high utilization electrode for PEFCs

To confirm the superiority of newly developed electrocatalyst layer (ECL) for polymer electrolyte fuel cells, three-dimensional dispersion states of Nafion ionomer in Pt/carbon black agglomerates were analyzed by electron tomography based on multiple TEM images taken at different tilt angles. Uniform distribution of the ionomer has been first observed, proving the high catalyst utilization in the new ECL distinctive from that of the conventional one.     

Ruthenium-catalyzed nitrogen-directed ortho CH borylation of aromatic imines with pinacolborane

An efficient ruthenium catalyst system for the direct ortho CH borylation of aromatic imines is described. The reaction of tert-butyl-1-arylmethanimines with pinacolborane in the presence of Ru(cod)(cot), followed by hydrolysis, to afford the ortho-formyl-substituted arylboronates. The borylation was achieved with complete mono-selectivity.     

In situ observation of formation of misfit dislocations in pseudomorphic monolayer overgrowth of metals and non-metals

Epitaxial overgrowth in cases of deposit and substrate combinations of PbSe/PbS, Au/Pd and Pd/Au were observed in situ in an electron microscope. It was found that the growth proceeds with the very characteristic features of monolayer overgrowth as implied by the theory of Frank and Van der Merwe; no indication of nucleation was observed and the formation of misfit dislocations was noticed over the whole area of films at certain critical thicknesses of the overgrowths. Points were noted which distinguish the monolayer overgrowth from the case where misfit dislocations are introduced in nucleated islands, to which Matthews has counted the growth processes in these combinations. The importance of climb motion as well as slip motion was stressed as the mechanism of introduction of misfit dislocations. Some results of electron diffraction and electron microscopy of films prepared in separate evaporation units were also quoted. These were to examine the relation between misfit dislocation density and mean lattice parameter and the effect of degree of vacuum on the growth mode and to indicate that the same growth mode takes place for some other combinations of IV–VI compounds, SnTe/PbSe, PbTe/PbS and PbTe/PbSe.     

Relaxation Oscillation Enhancement and Coherence Collapse in Semiconductor Lasers with Optical Feedback

The dynamic characteristics of a semiconductor laser with optical feedback are strongly dependent on the injection current and the reflectivity and position of the external feedback reflector. We investigated the relaxation oscillation enhancement and coherence collapse state of the laser oscillation based on the laser rate equations. It is well known that laser output power jumps with increase of the injection current due to external mode transition. But here for the first we time demonstrate the existence of a chaotic scenario within successive laser power jumps. The results calculated by numerical simulations based on the rate equations are compared with those of the experiments and good coincidence between them is found.     

Light-harvesting energy transfer and subsequent electron transfer of cationic porphyrin complexes on clay surfaces

A novel energy-transfer system involving nonaggregated cationic porphyrins adsorbed on an anionic-type clay surface and the electron-transfer reaction that occurs after light harvesting are described. In the clay-porphyrin complexes, photochemical energy transfer from excited singlet zinc porphyrins to free-base porphyrins proceeds. The photochemical electron-transfer reaction from an electron donor in solution (hydroquinone) to the adsorbed porphyrin in the excited singlet state was also examined. Because the electron-transfer rate from the hydroquinone to the excited singlet free-base porphyrin is larger than that to the excited singlet zinc porphyrin, we conclude that the energy transfer accelerates the overall electron-transfer reaction.     

Hydrogen generation by reaction of Si nanopowder with neutral water

Si and its oxide are nonpoisonous materials, and thus, it can be taken for medical effects. We have developed a method of generation of hydrogen by use of reactions of Si nanopowder with water in the neutral pH region. Si nanopowder is fabricated by the simple bead milling method. Si nanopowder reacts with water to generate hydrogen even in cases where pH is set at the neutral region between 7.0 and 8.6. The hydrogen generation rate strongly depends on pH and in the case of pH 8.0, ～55 ml/g hydrogen which corresponds to that contained in approximately 3 L saturated hydrogen-rich water is generated in 1 h. The reaction rate for hydrogen generation greatly increases with pH, indicating that the reacting species is hydroxide ions. The change of pH after the hydrogen generation reaction is negligibly low compared with that estimated assuming that hydroxide ions are consumed by the reaction. From these results, we conclude the following reaction mechanism: Si nanopowder reacts with hydroxide ions in the rate-determining reaction to form hydrogen molecules, SiO₂, and electrons in the conduction band. Then, generated electrons are accepted by water molecules, resulting in production of hydrogen molecules and hydroxide ions. The hydrogen generation rate strongly depends on the crystallite size of Si nanopowder, but not on the size of aggregates of Si nanopowder. The present study shows a possibility to use Si nanopowder for hydrogen generation in the body in order to eliminate hydroxyl radicals which cause various diseases.     

Site-controlled application of electric potential on a conducting polymer "canvas"

A novel patterning method for conducting polymer films was successfully demonstrated using the concept of bipolar electrochemistry. The local application of an anodic potential to poly(3-methylthiophene) (PMT) and poly(3,4-ethylenedioxythiophene) (PEDOT) on a bipolar electrode (BPE) realized local electrochemical doping and reaction depending on the supporting salt used. The potential applied on the BPE was measured and corresponded well to the patterns. The array-type driving electrode system was able to draw complex patterns in a site-controlled manner.     

Spallation ultracold neutron source of superfluid helium below 1 K

For the production of high-density ultracold neutrons (UCNs), we placed 0.8 K superfluid helium in a cold neutron moderator. We resolved previous heat-load problems in the spallation neutron source that were particularly serious below 1 K. With a proton-beam power of 400 MeV×1 μA, a UCN production rate of 4 UCN cm(-3) s(-1) at the maximum UCN energy of E(c)=210 neV and a storage lifetime of 81 s were obtained. A cryogenic test showed that the production rate can be increased by a factor of 10 with the same storage lifetime by increasing the proton-beam power as well as (3)He pumping speed.     

Oxidative Polymerization of Silylthioketene Dimer

Summary: The first π‐conjugated poly(thioketene dimer) was synthesized via the homopolymerization of a silylthioketene dimer by a chemical oxidation‐reduction process. The polymerization of trimethylsilylthioketene dimer in the presence of FeCl₃ (in CHCl₃ at 70 °C for 24 h) gave the corresponding doped poly(thioketene dimer). After treatment of the doped polymer with an aqueous solution of ammonia, the neutral poly(thioketene dimer) was obtained with an incidental desilylation. The polymer obtained was soluble in DMF and DMSO. From gel permeation chromatographic analysis (DMF, polystyrene standards), the number‐average molecular weight of the polymer was found to be 7 460. The polymer showed low oxidation potentials derived from the thioketene dimer unit. An effective extension of the π‐conjugation was observed in the polymer.

Synthesis of π‐conjugated poly(thioketene dimer).     

Electrochemical Fluorination of Dithiocarbonates Using a Triarylamine Mediator

Electrochemical oxidation of O-(4-chlorobenzyl) S-methyl dithiocarbonate using tris(2,4-dibromophenyl)amine as a redox mediator was studied by cyclic voltammetric measurements. The triarylamine mediated anodic fluorodesulfurization of O-(4-chlorobenzyl) and O-(4-bromobenzyl) S-methyl dithiocarbonates provided 4-chloro- and 4-bromobenzyl fluorides, respectively in moderate yields. On the other hand, similar anodic fluorination of O-(2-phenethyl) S-octyl dithiocarbonate and O-(4-bromophenyl) S-methyl dithiocarbonate afforded 2-phenethyl trifluoromethyl ether and difluoro(methylthio)methyl 4-bromophenyl ether, respectively. Mechanistic aspects are also discussed.