Crystal engineering for topochemical polymerization of muconic esters using halogen-halogen and CH/pi interactions as weak intermolecular interactions

We now report the molecular and crystal structure design of muconic ester derivatives on the basis of crystal engineering using halogen-halogen contacts and CH/pi interactions. The solid-state photoreaction pathway of the dibenzyl (Z,Z)-muconates as the 1,3-diene dicarboxylic acid monomers depends on the structure of the ester groups. The substitution of a halogen atom for the aromatic hydrogen of a benzyl group induces topochemical polymerization to produce stereoregular polymers in a crystalline form, whereas the unsubstituted benzyl derivative isomerizes to yield the corresponding E,E isomer under similar conditions. The topochemical polymerization process is directly confirmed by the fact that the single-crystal structures before and after the polymerization are very similar to each other. From the crystal structure analysis for a series of substituted benzyl (Z,Z)- and (E,E)-muconates, it has been revealed that the planar diene moieties are closely packed to form a columnar structure in the crystals. The stacking of the polymerizable monomers is characterized by a stacking distance of 4.9-5.2 A along the columns. This structure is supported by a halogen-halogen interaction between the chlorine or bromine atoms introduced at the p position of the benzyl groups in addition to an aromatic stacking due to the CH/pi interaction between the benzylic methylene hydrogens and aromatic rings. The design of a monomer packing corresponds to the type and position of the introduced halogen atom and also the polymorphs. To make a stacking distance of 5 A using both halogen-halogen and CH/pi interactions as supramolecular synthons is important for the molecular design of muconic ester derivatives appropriate for topochemical polymerization.     

Fabrication of optically transparent chitin nanocomposites

This paper demonstrates the preparation of chitin nanofibers from crab shells using a simple mechanical treatment. The nanofibers are small enough to retain the transparency of neat acrylic resin. Possessing hydroxyl and amine/N-acetyl functionalities, water suspension of chitin nanofibers was vacuum-filtered 9 times faster than cellulose nanofibers to prepare a nanofiber sheet of 90 mm in diameter. This is a prominent advantage of chitin nanofibers over cellulose nanofibers in terms of commercial application. Interestingly, chitin acrylic resin films exhibited much higher transparency than cellulose acrylic resin films owing to the close affinity between less hydrophilic chitin and hydrophobic resin. Furthermore, the incorporation of chitin nanofibers contributes to the significant improvement of the thermal expansion and mechanical properties of the neat acrylic resin. The properties of high light transmittance and low thermal expansion make chitin nanocomposites promising candidates for the substrate in a continuous roll-to-roll process in the manufacturing of various optoelectronic devices such as flat panel displays, bendable displays, and solar cells.     

Development and validation of stable‐isotope dilution liquid chromatography–tandem mass spectrometric method for determination of salivary progesterone

A method for the quantification of progesterone (PROG) in human saliva using liquid chromatography–electrospray ionization–tandem mass spectrometry (LC‐ESI‐MS/MS) has been developed and validated. The saliva was deproteinized with acetonitrile, purified using a Strata™‐X cartridge, and subjected to LC‐ESI‐MS/MS. Quantification was based on selected reaction monitoring, and deuterated PROG was used as the internal standard. This method allowed the reproducible (intra‐ and inter‐assay relative standard deviations, <2.2%) and accurate (analytical recovery, 96.6–99.7%) quantification of the salivary PROG using a 400 μL sample, and the limit of quantification was 12.5 pg/mL. The developed method enabled detection of the variation in the salivary PROG concentrations of healthy volunteers during the menstrual cycle and measurement of the salivary concentrations of pregnant women. The method is expected to be an alternative to the blood PROG monitoring in clinical examinations, because saliva collection is easy, non‐invasive and repeatable. Copyright © 2011 John Wiley & Sons, Ltd.     

High‐performance a‐Si1–xOx:H/c‐Si heterojunction solar cells realized by the a‐Si:H/a‐Si1–xOx:H stack buffer layer

We used amorphous silicon oxide (a‐Si_1–xO_x:H) and microcrystalline silicon oxide (µc‐Si_1–xO_x:H) as buffer layer and p‐type emitter layer, respectively, in n‐type silicon hetero‐junction (SHJ) solar cells. We proposed to insert a thin (2 nm) intrinsic amorphous silicon (a‐Si:H) thin film between the thin (2.5 nm) a‐Si_1–xO_x:H buffer layer and the p‐layer to form a stack buffer layer of a‐Si:H/a‐Si_1–xO_x:H. As a result, a high open‐circuit voltage (V_OC) and a high fill factor (FF) were obtained at the same time. Finally, a high efficiency of 19.0% (J_SC = 33.46 mA/cm², V_OC = 738 mV, FF = 77.0%) was achieved on a 100 μm thick polished wafer using the stack buffer layer.

     

Radiation Temperature Measurement of an Imploded X-Ray Source with a Filtered-Multi-Channel Pinhole Camera

The Plankian radiation temperature of an intense x-ray source driven by imploding spherical CH plastic shell is measured with a filtered-multi-channel pinhole camera. With all the twelve laser beams of the GEKKO-XII laser facility applied, the average radiation temperature is measured to be around 465 eV while the temperature at the core is as high as 818eV. This value is confirmed by other instruments applied.