Reductive activation of dioxygen by a myoglobin reconstituted with a flavohemin

We successfully converted myoglobin, an oxygen-storage hemoprotein, into an oxygen-activating hemoprotein like cytochrome P450s by replacing the native hemin with the artificially created flavohemin. The reconstituted myoglobin, rMb(1), was chacterized by ESI-TOF-mass, UV-vis, and fluorescence spectra. The 1H NMR spectrum of cyanomet rMb(1) indicates that two hemin conformers are present in a ratio of 1:1. Upon the addition of NADH to the buffer solution of rMb(1) in the presence of SOD and catalase, the oxymyoglobin was rapidly formed. As compared with the formation of the oxygenated native myoglobin in the presence of 10-N-(acetylaminoethyl)isoalloxazine, the rate constant of the oxyheme formation in rMb(1) is 6 times larger. This is because the flavin covalently linked to the terminal heme propionate functions as an effective mediator of an electron transfer from NADH to the hemin in rMb(1). Furthermore, rMb(1) shows the deformylation activity, when 2-phenylpropionaldehyde (2-PPA) was employed as a substrate. This result indicates that the oxyheme is reductively activated to Fe(III)-peroxoanion (Fe(III)-O22-). The result in this report is the first example of the activation of dioxygen by myoglobin. This study shows the utility of the replacement of the native hemin with a chemically modified one for the functionalization of myoglobin.     

Synthesis of aryltriethoxysilanes via rhodium(I)-catalyzed cross-coupling of aryl electrophiles with triethoxysilane

The general and efficient silylation of aryl halides has been developed utilizing triethoxysilane and a rhodium catalyst. The substrate scope is broad and includes ortho-, meta-, and para-substituted electron-rich and -deficient aryl iodides. In addition, the silylation of aryl bromides and fluoroalkanesulfonates proceeded in the presence of tetra-n-butylammonium iodide.     

Preparation of dehydrated powder of hemoglobin vesicles

The carbonyl hemoglobin (CO-Hb), which was used to prevent denaturation (metHb) during the preparation of samples, was encapsulated into lipid vesicles constituted from unsaturated phospholipid, cholesterol and unsaturated fatty acid. Unsaturated components were polymerized by γ-irradiation to enhance the stability of bilayer membrane. An aqueous dispersion of resulting Hb vesicles was freeze-dried in the presence of saccharides (50–200 mM) to obtain a dehydrated powder of Hb vesicles. Change in the vesicle size, the leakage of encapsulated Hb and the oxidation of Hb to metHb were not observed. Therefore, the long-term storage of Hb vesicles can be realized as a dry powder.     

Selective and sensitive fluorometric determinations of cobalt(II) and hydrogen peroxide with fluorescein-hydrazide

Fluorophotometric determinations of cobalt(II) and hydrogen peroxide were investigated by using the fluorescence reaction between fluorescein-hydrazide (fl-NHNH(2)), and/or hydrogen peroxide, cobalt(II), respectively. The calibration graphs were liner in the range of 0-6.0 ng cobalt(II) and 0-1000 ng hydrogen peroxide per 10 ml at an emission wavelength (E(m)) of 530 nm with an exicitation wavelength (E(x)) of 508 nm, respectively. These proposed methods were selective and simple, and the effect of foreign ions was negligible in comparison with conventional reported methods such as nitroso R,4-(2-pyridylazo)resorcinol(PAR), alizarin, pyridine-2-aldehyde-2-pyridinehydrazone, stilbazo-cobalt(II), etc.     

Ligand binding properties of myoglobin reconstituted with iron porphycene: unusual O2 binding selectivity against CO binding

Sperm whale myoglobin, an oxygen storage hemoprotein, was successfully reconstituted with the iron porphycene having two propionates, 2,7-diethyl-3,6,12,17-tetramethyl-13,16-bis(carboxyethyl)porphycenatoiron. The physicochemical properties and ligand bindings of the reconstituted myoglobin were investigated. The ferric reconstituted myoglobin shows the remarkable stability against acid denaturation and only a low-spin characteristic in its EPR spectrum. The Fe(III)/Fe(II) redox potential (-190 mV vs NHE) determined by the spectroelectrochemical measurements was much lower than that of the wild-type. These results can be attributed to the strong coordination of His93 to the porphycene iron, which is induced by the nature of the porphycene ring symmetry. The O2 affinity of the ferrous reconstituted myoglobin is 2600-fold higher than that of the wild-type, mainly due to the decrease in the O2 dissociation rate, whereas the CO affinity is not so significantly enhanced. As a result, the O2 affinity of the reconstituted myoglobin exceeds its CO affinity (M' = K(CO)/K(O2) < 1). The ligand binding studies on H64A mutants support the fact that the slow O2 dissociation of the reconstituted myoglobin is primarily caused by the stabilization of the Fe-O2 sigma-bonding. The IR spectra for the carbon monoxide (CO) complex of the reconstituted myoglobin suggest several structural and/or electrostatic conformations of the Fe-C-O bond, but this is not directly correlated with the CO dissociation rate. The high O2 affinity and the unique characteristics of the myoglobin with the iron porphycene indicate that reconstitution with a synthesized heme is a useful method not only to understand the physiological function of myoglobin but also to create a tailor-made function on the protein.     

Determination of 4-alkylphenols by novel derivatization and gas chromatography-mass spectrometry

A simple and sensitive method for the determination of alkylphenols in water samples has been developed using gas chromatography-mass spectrometry. Alkylphenols were determined after the extractive derivatization with pentafluoropyridine. The derivatization of alkylphenols efficiently proceeded to give the corresponding 4-tetrafluoropyridyl derivatives under the biphasic reaction system. The derivatization conditions including the phase-transfer catalyst, the amount of pentafluoropyridine, the reaction time, the concentration of NaOH and organic solvent were optimized. On the mass spectra of these derivatives, intense specific ion peaks were observed: m/z 256 for 4-n-alkylphenols and m/z 284 for 4-tert.-alkylphenols. Calibration curves were linear in the range of 20-1000 ng/l (200-10,000 ng/l for nonylphenol), and the detection limits varied between 6.93 and 15.7 ng/l (85.2 ng/l for nonylphenol). The average recoveries of the alkylphenols in a fortified river water sample (100 ng/l except for nonylphenol: 1000 ng/l) ranged from 91.1 to 112%. The relative standard deviations were found to be between 5.6 and 16%. This method was successfully applied to the determination of alkylphenols in river water.     

Investigation of the crystal structure and the structural and magnetic properties of SrCu2(PO4)2

SrCu2(PO4)2 was prepared by the solid-state method at 1153 K. Its structure was solved by direct methods in the space group Pccn (No. 56) with Z = 8 from synchrotron X-ray powder diffraction data measured at room temperature. Structure parameters were then refined by the Rietveld method to obtain the lattice parameters, a = 7.94217(8) A, b = 15.36918(14) A, and c = 10.37036(10) A. SrCu2(PO4)2 presents a new structure type and is built up from Sr2O16 and Cu1Cu2O8 units with Cu1...Cu2 = 3.256 A. The magnetic properties of SrCu2(PO4)2 were investigated by magnetic susceptibility, magnetization up to 65 T, Cu nuclear quadrupole resonance (NQR), electron-spin resonance, and specific heat measurements. With spin-dimer analysis, it was shown that the two strongest spin-exchange interactions between Cu sites result from the Cu1-O...O-Cu2 and Cu2-O...O-Cu2 super-superexchange paths with Cu1...Cu2 = 5.861 A and Cu2...Cu2 = 5.251 A, and the superexchange associated with the structural dimer Cu1Cu2O8 is negligible. The magnetic susceptibility data were analyzed in terms of a linear four-spin cluster model, Cu1-Cu2-Cu2-Cu1 with -2J(1)/kB = 82.4 K for Cu1-Cu2 and -2J(2)/k(B) = 59 K for Cu2-Cu2. A spin gap deduced from this model (Delta/kB = 63 K) is in agreement with that obtained from the Cu NQR data (Delta/kB = 65 K). A one-half magnetization plateau was observed between approximately 50 and 63 T at 1.3 K. Specific heat data show that SrCu2(PO4)2 does not undergo a long-range magnetic ordering down to 0.45 K. SrCu2(PO4)2 melts incongruently at 1189 K. We also report its vibrational properties studied with Raman spectroscopy.     

Reactivities of Stable Rotamers: XLIV. Ring-Opening Reactions of 1-(9-Fluorenyl)-2-(2-methyl-2-oxiranyl)naphthalene Rotamers With Acids and the Structure of Oxiranes

X-ray crystallography of the ap-form of the 1-(9-fluorenyl)-2-(2-methyl-2-oxiranyl)naphthalene has revealed that the carbon atom of the oxirane which is connected to the naphthyl group in this compound is almost planar. The specific structural features of the epoxy ring in this compound are caused by sterical effects and by the presence of a -system in the immediate vicinity of the oxirane ring. Certain differences have been found also in reactivity of rotational isomers of 2-X-substituted 1-[1-(9-fluorenyl)-2-naphthyl]ethyl cations (X = O, S, Se). At X = O arose more deprotonation product from the -position of the oxygen than in reactions of sulfur and selenium-containing analogs. Reactions of epoxides with zinc chloride almost exclusively gave the corresponding aldehydes.     

A GaCl3-catalyzed [4+1] cycloaddition of alpha,beta-unsaturated carbonyl compounds and isocyanides leading to unsaturated gamma-lactone derivatives

A GaCl3-catalyzed reaction of alpha,beta-unsaturated ketones with isocyanides leading to the formation of unsaturated lactone derivatives is described. This is the first example of the catalytic [4+1] cycloaddition of alpha,beta-unsaturated ketones and isocyanides. GaCl3 is an excellent catalyst due to its lower oxophilicity, which is desirable for all of the key steps, such as E/Z isomerization, cyclization, and deattachment from the products.     

Preparation of polymers with substituted allyl end group using dimer of α-methylvinyl monomer as addition fragmentation chain transfer agent at high temperatures

The dimerization of methyl methacrylate, ethyl methacrylate, methacrylonitrile, and α-methylstyrene to 2-substituted-1-allylic compounds [CH₂?C(X)CH₂C(CH₃)₂X] (X = COOR, C₆H₅, or CN), and methyl α-ethylacrylate to a 3-substituted-2-allylic compound [CH₃CH?C(COOCH₃)CH₂C(CH₃)(C₂H₅) COOCH₃] was carried out by catalytic chain transfer using benzylbis (dimethylglyoximato) (pyridine) cobalt (III). These dimers were then used as addition-fragmentation chain transfer agents in the polymerizations of methyl methacrylate and styrene at 80⁰C or above. Cross-dimers from methacrylic ester-α-methylstyrene and methacrylonitrile-α-methylstyrene mixtures were similarly prepared. Except for those from methyl α-ethylacrylate and methacrylonitrile, all the dimers participated in the addition-fragmentation and the copolymerization to different extents. The dimer of methyl α-ethylacrylate was actually inactive during the styrene and methyl methacrylate polymerizations. The methacrylonitrile dimer was primarily incorporated in the polymer chain through copolymerization. Among the dimer and the cross-dimers from α-methylstyrene with the other monomers, those bearing the α-methylstyrene moiety in the α-substituent [CH₂?C(X)CH₂C(CH₃)₂C₆H₅, X?COOCH₃, COOC₂H₅, and CN] are noted as highly reactive chain transfer agents. © 1994 John Wiley & Sons, Inc.