Synthesis and properties of novel crown ether-annelated 4′,5′-diaza-9′-(1,3-dithiole-2-ylidene)-fluorenes and their ruthenium(II) complexes

Two novel redox-active 1,3-dithiole (DT) ring-fused 4,5-diazafluorene ligands with crown ether moieties (L1 and L2) were synthesized and characterized. The crystal structure of L1 was studied. The electrochemical and spectroscopic properties of these new ligands, as well as the corresponding bis(bipyridine)ruthenium(II) complexes [4: Ru L1(bpy)₂ and 5: Ru L2(bpy)₂], were also been investigated.     

Total Synthesis of Nominal Gobienine A

The lichen‐derived glycoconjugate gobienine A is structurally more complex than most glycolipids isolated from higher plants by virtue of the all‐cis substituted γ‐lactone substructure embedded into its macrocyclic frame. A concise entry into this very epimerization‐prone and hence challenging structural motif is presented, which relies on an enantioselective cyanohydrin formation, an intramolecular Blaise reaction, a palladium‐catalyzed alkoxycarbonylation, and a diastereoselective hydrogenation of the tetrasubstituted alkene in the resulting butenolide. This strategy, in combination with ring‐closing olefin metathesis for the formation of the macrocyclic perimeter, allowed the proposed structure of gobienine A ( 1 ) to be formed in high overall yield. The recorded spectral data show that the structure originally attributed to gobienine A is incorrect and that it is not the epimerization‐prone ester site on the butanolide ring that is the locus of misassignment; rather, the discrepancy must be more profound.     

Salt‐Free Reduction of Nonprecious Transition‐Metal Compounds: Generation of Amorphous Ni Nanoparticles for Catalytic C–C Bond Formation

A salt‐free procedure for the generation of a wide variety of metal(0) particles, including Fe, Co, Ni, and Cu, was achieved using 2,3,5,6‐tetramethyl‐1,4‐bis(trimethylsilyl)‐1,4‐diaza‐2,5‐cyclohexadiene ( 1 ), which reduced the corresponding metal precursors under mild conditions. Notably, Ni particles formed in situ from the treatment of Ni(acac)₂ (acac=acetylacetonate) with 1 in toluene exhibited significant catalytic activity for reductive C? C bond‐forming reactions of aryl halides in the presence of excess amounts of 1 . By examination of high‐magnification transmission electron microscopy images and electron diffraction patterns, we concluded that amorphous Ni nanoparticles (Ni aNPs) were essential for the high catalytic activity.     

Dicarboxylic degradation products of nonylphenol polyethoxylates. Determination and structural elucidation in water samples by solid-phase extraction and gas chromatography-mass spectrometry after methylation

A reliable method combining solid-phase extraction, derivatization and gas chromatography-chemical ionization mass spectrometry (GC-CI-MS) was developed for the measurement, in river and sewage effluent water, of four select model compounds of dicarboxylic metabolites (dm-CA(5-8)P1EC) and other dicarboxylic metabolites (CA(5-8)P1ECs) of nonylphenol polyethoxylates. These selected isomers were referred as dm-CA(5-8)P1ECs because they have an alpha,alpha-dimethyl configuration (expressed as "dm"), five to eight C atoms and a carboxyl group in the alkyl chain, and an ethoxy acetic acid group. The derivatization of terminal carboxyl groups was successful with (trimethylsilyl)diazomethane. The best extraction conditions were obtained using an Oasis HLB cartridge as a sorbent bed and 4 ml of MTBE/methanol (9:1, v/v) elution mixture. The method detection limits of 0.03-0.07 microg/l for dm-CA(5-8)P1ECs were attained in 500 ml pure water. The recovery was then evaluated for pure water, river and sewage effluent water samples. The high recoveries of typically >89% for each isomer indicated the high performance of the method. Although dm-CA(5-8)P1ECs were not detected in the collected water samples, 21 isomers of CA(5-8)P1ECs were identified by CI-MS and the tentative structures of six out of them were elucidated, mainly limited to the branch at alpha-C atom, by studying the EI-mass spectra. The relative concentrations of individual CA(5-8)P1EC metabolites were calculated based on dm-CA(5-8)P1ECs. The results showed that the main degradation on the nonyl chain occurred via the elimination of two carbon-units and the concentrations in Japan were much lower than those in Taiwan and Italy.     

Sequential pericyclic reaction of ene-diallenes: an efficient approach to the steroid skeleton

[reaction: see text] The one-pot construction of polycyclic aromatic systems from acyclic ene-bis(propargyl alcohols) was achieved through a tandem dual [2,3]-sigmatropic rearrangement/6pi-electrocyclic reaction/intramolecular [4 + 2] cycloaddition sequence. A steroidal compound was conveniently synthesized using the present method.     

Complementary structural information of positive- and negative-ion MSn spectra of glycopeptides with neutral and sialylated N-glycans

Positive- and negative-ion MSn spectra of chicken egg yolk glycopeptides binding a neutral and a sialylated N-glycan were acquired by using electrospray ionization linear ion trap time-of-flight mass spectrometry (ESI-LIT-TOFMS) and collision-induced dissociation (CID) with helium as collision gas. Several characteristic differences were observed between the positive- and negative-ion CID MSn (n = 2, 3) spectra. In the positive-ion MS2 spectra, the peptide moiety was presumably stable, but the neutral N-glycan moiety caused several B-type fragmentations and the sialylated N-glycan almost lost sialic acid(s). In contrast, in the negative-ion MS2 spectra, the peptide moiety caused several side-chain and N-glycan residue (e.g., N-acetylglucosamine (GlcNAc) residue) fragmentations in addition to backbone cleavages, but the N-glycan moieties were relatively stable. The positive-ion MS3 spectra derived from the protonated peptide ion containing a GlcNAc residue (203.1 Da) provided enough information to determine the peptide amino-acid sequence including the glycosylation site, while the negative-ion MS3 spectra derived from the deprotonated peptide containing a 0,2X1-type cross-ring cleavage (83.1 Da) complicated the peptide sequence analysis due to side-chain and 0,2X1 residue related fragmentations. However, for the structural information of the N-glycan moiety of the glycopeptides, the negative-ion CID MS3 spectra derived from the deprotonated 2,4A6-type cross-ring cleavage ion (neutral N-glycan) or the doubly deprotonated B6-type fragment ion (sialylated N-glycan) are more informative than are those of the corresponding positive-ion CID MS3 spectra. Thus, the positive-ion mode of CID is useful for the analyses of peptide amino-acid sequences including the glycosylation site. The negative-ion mode of CID is especially useful for sialylated N-glycan structural analysis. Therefore, in the structural analysis of N-glycopeptides, their roles are complementary.     

Effect of formulated ingredients on rapidly disintegrating oral tablets prepared by the crystalline transition method

The aim of this article was to determine the optimal ingredients for the rapidly disintegrating oral tablets prepared by the crystalline transition method (CT method). The effect of ingredients (diluent, active drug substance and amorphous sugar) on the characteristics of the tablets was investigated. The ingredients were compressed and the resultant tablets were stored under various conditions. The oral disintegration time of the tablet significantly depended on diluents, due to differences in the penetration of a small amount of water in the mouth and the viscous area formed inside the tablet. The oral disintegration time was 10-30 s for tablets with a tensile strength of approximately 1 MPa, when erythritol, mannitol or xylitol was used as the diluent. The increase in the tensile strength of tablets containing highly water-soluble active drug substances during storage was as large as that of tablets without active drug substances, while the increase in the tensile strength of tablets containing low water-soluble active drug substances was small. It was therefore found that highly water-soluble active drug substances were more suitable for the formulation prepared by the CT method than low water-soluble active drug substances. Irrespective of the type of amorphous sugar (amorphous sucrose, lactose or maltose) used, the porosity of tablets with 1 MPa of tensile strength was 30-40%, and their oral disintegration time was 10-20 s. The optimal ingredients for rapidly disintegrating oral tablets with reasonable tensile strength and disintegration time were therefore determined from these results.     

Pulse radiolysis study of ion-species effects on the solvated electron in alkylammonium ionic liquids

The spectra and kinetic behavior of solvated electrons (e_sol⁻) in alkyl ammonium ionic liquids (ILs), i.e. N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide (DEMMA-TFSI), N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium tetrafluoroborate (DEMMA-BF₄), N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide (TMPA-TFSI), N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13-TFSI), N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P13-TFSI), and N-methyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P14-TFSI) were investigated by the pulse radiolysis method. The e_sol⁻ in each of the ammonium ILs has an absorption peak at 1100 nm, with molar absorption coefficients of 1.5–2.3×10⁴ dm³ mol⁻¹ cm⁻¹. The e_sol⁻ decayed by first order with a rate constant of 1.4–6.4×10⁶ s⁻¹. The reaction rate constant of the solvated electron with pyrene (Py) was 1.5–3.5×10⁸ dm³ mol⁻¹ s⁻¹ in the various ILs. These values were about one order of magnitude higher than the diffusion-controlled limits calculated from measured viscosities. The radiolytic yields (G-value) of the e_sol⁻ were 0.8–1.7×10⁻⁷ mol J⁻¹. The formation rate constant of e_sol⁻ in DEMMA-TFSI was 3.9×10¹⁰ s⁻¹. The dry electron (e_dry⁻) in DEMMA-TFSI reacts with Py with a rate constant of 7.9×10¹¹ dm³ mol⁻¹ s⁻¹, three orders of magnitude higher than that of the e_sol⁻ reactions. The G-value of the e_sol⁻ in the picosecond time region is 1.2×10⁻⁷ mol J⁻¹. The capture of e_dry⁻ by scavengers was found to be very fast in ILs.     

Synthesis of collagen-like sequential polypeptides containing O-phospho-L-hydroxyproline and preparation of electrospun composite fibers for possible dental application

A synthetic route is described for collagen-like polypeptides constructed from O-phospho-L-hydroxyproline [Hyp(PO(3)H(2))] residues. Using the synthetic polypeptides and a natural protein, gelatin, fine fibers and their network structures (ESNWs) were prepared via electrospinning. The composite ESNWs can induce the mineralization of calcium phosphate. The phosphoryl groups of the Hyp(PO(3)H(2)) residues affect both the crystalline phase and amount of the calcium phosphate, depending on the chemical structure in the repeating sequence. The composite ESNWs can be developed as a biocompatible replacement of the extracellular matrix of hard tissues, and thus can be applied as dental materials for restoration of dental cavities or as a sealant for pits and fissures.