Development of continuous process enabling nanofibrillation of pulp and melt compounding

Microfibrillated cellulose (MFC), a mechanically fibrillated pulp mostly consisting of nanofibrils, is a very attractive material because of its high elastic modulus and strength. Although much research has been done on composites of MFC and polypropylene (PP), it has been difficult to produce such composites at an industrial level because of the difficulties in using MFC in such composites are not only connected to the polarity (that can be improved with compatibilizers), but also with the challenge to make a homogeneous blend of the components, and also the low temperature stability of cellulose that could cause problems during processing. We developed a new processing method which enables continuous microfibrillation of pulp and its melt compounding with PP. Never-dried kraft pulp and powdered PP were used as raw materials to obtain MFC by kneading via a twin-screw extruder. Scanning electron microscopy showed nano to submicron wide fibers entangled in the powdered PP. MFC did not aggregate during the melt compounding process, during which the water content was evaporated. Maleic anhydride polypropylene (MAPP) was used as a compatibilizer to reinforce interfacial adhesion between the polar hydroxyl groups of MFC and non-polar PP. We investigated the effect of MAPP content on the mechanical properties of the composite, which were drastically improved by MAPP addition. Needle-leaf unbleached kraft pulp (NUKP)-derived MFC composites had better mechanical properties than needle-leaf bleached kraft pulp (NBKP)-derived MFC composites. Injection molded NUKP-derived MFC composites had good mechanical and thermal properties. The tensile modulus of 50 wt% MFC composite was two times, and the tensile strength 1.5 times higher than that of neat PP. The heat distortion temperature of 50 wt% MFC content composite under 1.82 MPa flexural load was increased by 53 °C, from 69 to 122 °C. This newly developed continuous process using powder resin has the potential for application at an industrial level.     

Application of plug–plug technique to ACE experiments for discovery of peptides binding to a larger target protein: A model study of calmodulin‐binding fragments selected from a digested mixture of reduced BSA

To discover peptide ligands that bind to a target protein with a higher molecular mass, a concise screening methodology has been established, by applying a “plug–plug” technique to ACE experiments. Exploratory experiments using three mixed peptides, mastoparan‐X, β‐endorphin, and oxytocin, as candidates for calmodulin‐binding ligands, revealed that the technique not only reduces the consumption of the protein sample, but also increases the flexibility of the experimental conditions, by allowing the use of MS detection in the ACE experiments. With the plug–plug technique, the ACE–MS screening methodology successfully selected calmodulin‐binding peptides from a random library with diverse constituents, such as protease digests of BSA. Three peptides with K_d values between 8–147 μM for calmodulin were obtained from a Glu‐C endoprotease digest of reduced BSA, although the digest showed more than 70 peaks in its ACE–MS electropherogram. The method established here will be quite useful for the screening of peptide ligands, which have only low affinities due to their flexible chain structures but could potentially provide primary information for designing inhibitors against the target protein.     

Selective hydrogen peroxide oxidation of sulfides to sulfoxides or sulfones with MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions

Selective oxidation of sulfides to sulfoxides and sulfones with hydrogen peroxide under organic solvent-free conditions was demonstrated by the MWW-type titanosilicate zeolite catalyst. Sulfides were oxidized smoothly to give sulfoxides with good selectivities at ambient temperature using 1.0–1.2 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst. Especially, the Ti-MWW with an interlayer-expanded structure (Ti-IEZ-MWW) catalyst showed high activity with good chemoselectivity for the oxidation of various sulfides. The catalyst is recyclable for at least five cycles, and the only byproduct is water. Sulfides were directly oxidized to give sulfones in high yields by 2.5 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions.     

Synthesis and properties of novel crown ether-annelated 4′,5′-diaza-9′-(1,3-dithiole-2-ylidene)-fluorenes and their ruthenium(II) complexes

Two novel redox-active 1,3-dithiole (DT) ring-fused 4,5-diazafluorene ligands with crown ether moieties (L1 and L2) were synthesized and characterized. The crystal structure of L1 was studied. The electrochemical and spectroscopic properties of these new ligands, as well as the corresponding bis(bipyridine)ruthenium(II) complexes [4: Ru L1(bpy)₂ and 5: Ru L2(bpy)₂], were also been investigated.     

Preparation of Molecule‐Responsive Microsized Hydrogels via Photopolymerization for Smart Microchannel Microvalves

Microdevices designed for practical environmental pollution monitoring need to detect specific pollutants such as dioxins. Bisphenol A (BPA) has been widely used as a monomer for the synthesis of polycarbonate and epoxy resins. However, the recent discovery of its high potential ability to disrupt human endocrine systems has made the development of smart systems and microdevices for its detection and removal necessary. Molecule‐responsive microsized hydrogels with β‐cycrodextrin (β‐CD) as ligands are prepared by photopolymerization using a fluorescence microscope. The molecule‐responsive micro‐hydrogels show ultra‐quick shrinkage in response to target BPA. Furthermore, the flow rate of a microchannel is autonomously regulated by the molecule‐responsive shrinking of their hydrogels as smart microvalves.

     

Ultrasonic-Combined Plasma Bubbling for Adherent Bacteria Disinfection on Medical Equipment

Plasma Chemistry and Plasma Processing - Atmospheric low-temperature plasma has received attention for application in disinfection methods. In this study, we develop a plasma bubbling method as a...     

Phase-locked laser system for a metastable states qubit in 40 Ca+

We describe the development of a phase-locked laser system tailored to an ion-trap-based quantum information processor with (40)Ca(+). Laser outputs from an extended cavity diode laser and a Ti:sapphire laser with output laser wavelengths of approximately 850 and 854 nm, respectively, were phase locked and used to excite a Raman transition between the D(3/2) and D(5/2) metastable states qubit. Development and the performance of the laser system are described. We also compare the characteristics and the benefits of the developed qubit coupling with those in the conventional approaches.     

Observation of Unusual Molecular Diffusion Behaviour below the Lower Critical Solution Temperature of Water/2‐Butoxyethanol Mixtures by using Fluorescence Correlation Spectroscopy

The effect of solute affinity on solute diffusion in binary liquids well below the lower critical solution temperature (LCST) was studied by using fluorescence correlation spectroscopy. We measured the hydrodynamic radii of a hydrophobic and an amphiphilic fluorescent dye under systematic variation of the relative molar fractions of water/2‐butoxyethanol and, for comparison, of water/methanol mixtures, which do not show phase separation. We found that the apparent hydrodynamic radius of the hydrophobic dye almost doubled in water/2‐butoxyethanol, whereas it remained largely unchanged for the amphiphilic dye and in water/methanol mixtures. Our results indicate that the translational diffusion of solutes is influenced by transient local solution structures, even at temperatures well below the LCST. We conclude that, even far below LCST, different solutes can experience different environments in binary liquid mixtures depending on both the solute and solvent properties, all of which impact their reactivity.     

Total synthesis of (S)-(+)-ent-phomapyrones B and surugapyrone B

Phomapyrone B ( 1 ), the 2-pyrones isolated from the phytopathogenic fungus Leptosphaeria maculans, has been synthesized as the enantiomeric form starting from (S)-2-methylbutanol ( 4 ). Surugapyrone B ( 3 ) isolated from Streptmyces sp. USF-6280 as an antioxidant has also been synthesized as a natural form. The absolute configuration of phomapyrone B ( 1 ) was estimated to be the (R)-form and that of surugapyrone B ( 3 ) being the (S)-form. A series of 2-pyrone derivatives 17 have been synthesized through the established procedure and their DPPH radical-scavenging activities have also been evaluated.     

Highly Mesoporous Metal‐Organic Frameworks as Synergistic Multimodal Catalytic Platforms for Divergent Cascade Reactions

Rational engineering and assimilation of diverse chemo‐ and biocatalytic functionalities in a single nanostructure is highly desired for efficient multistep chemical reactions but has so far remained elusive. Here, we design and synthesize multimodal catalytic nanoreactors (MCNRs) based on a mesoporous metal‐organic framework (MOF). The MCNRs consist of customizable metal nanocrystals and stably anchored enzymes in the mesopores, as well as coordinatively unsaturated cationic metal MOF nodes, all within a single nanoreactor space. The highly intimate and diverse catalytic mesoporous microenvironments and facile accessibility to the active site in the MCNR enables the cooperative and synergistic participation from different chemo‐ and biocatalytic components. This was shown by one‐pot multistep cascade reactions involving a heterogeneous catalytic nitroaldol reaction followed by a [Pd/lipase]‐catalyzed chemoenzymatic dynamic kinetic resolution to yield optically pure (>99 % ee) nitroalcohol derivatives in quantitative yields.