Vinyl Polymerization. 386. Polymerization of Methyl Methacrylate Initiated by Imidazole in Aqueous Solution of Copper(II) Chloride

The radical polymerization of methyl methacrylate (MMA) was carried out with the system of imidazole (Im), copper(n) chloride, and water at 85°C. The effects of the amount of each component on the conversion of MMA were investigated. The polymerization proceeded through a radical mechanism. The overall activation energy was estimated to be 28.7 kJ/mole. The conversion of MMA showed a maximum at pH 8-9 of the aqueous solution. The formation of a complex of CuCl₂ with Im, water, and MMA was confirmed by electronic spectra. An initiation mechanism was proposed.     

Grafting of Polymers Having Pendant Peroxycarbonate Groups Onto Carbon Black and Postpolymerization of Vinyl Monomers

Abstract

Postpolymerization of vinyl monomers initiated by pendant peroxycarbonate groups of grafted polymer chains on carbon black (CB) was investigated. The grafting of polymers having pendant peroxycarbonate groups onto CB was achieved by the trapping of polymer radicals formed by the thermal decomposition of copolymers of t-butylperoxy-2-methacryloyloxyethyl-carbonate (HEPO) with vinyl monomers such as vinyl acetate (VAc), styrene (St) and methyl methacrylate (MMA). The copolymers having pendant peroxycarbonate groups were prepared by copolym-erization of HEPO with vinyl monomers using azo initiator under irradiation of UV light at room temperature. The amount of remaining pendant peroxycarbonate groups of the poly(VAc-co-HEPO)-grafted CB obtained from the reaction at 90°C was maximum and decreased above the temperature. Furthermore, the postpolymerization of vinyl monomers, such as St, MMA, and VAc was initiated in the presence of poly(VAc-co-HEPO)-grafted and poly(St-co-HEPO)-grafted CB and the corresponding polymers were postgrafted onto CB to give branched polymer-grafted CB. The percentage of poly(St)-postgrafting (proportion of post-grafted poly(St) to poly(MMA-co-HEPO)-grafted CB used) increased with increasing polymerization time, but became constant at 20% after 4 hours.     

Photoswitchable organocatalysis in acylation of alcohol using dithienylethene-linked azoles

Three novel dithienylethenes bearing azole derivatives were synthesized and found to undergo reversible photocyclization of the dithienylethene units upon alternate irradiation with UV and visible light. Among them, the dithienylethene-linked imidazole and N-phenylimidazole exhibited a relatively high organocatalytic activity for the acylation of 2-decanol with acetic anhydride, and the catalytic activity of the dithienylethene-linked imidazole could be switched by reversible photoinduced cyclization/cycloreversion of the dithienylethene unit.     

Investigation of radon and thoron concentrations in a landmark skyscraper in Tokyo

The temporal variation of the radon concentration, and the radon and thoron concentrations every 3 months for a year were measured using two types of devices in a landmark skyscraper, the Tokyo Metropolitan Government Daiichi Building. In the measurement of temporal variation of the radon concentration using a pulse type ionization chamber, the average radon concentration was 21 ± 13 Bq m^?3 (2–68 Bq m^?3). The measured indoor radon concentration had a strong relationship with the operation of the mechanical ventilation system and the activities of the office workers. The radon concentration also increased together with temperature. Other environmental parameters, such as air pressure and relative humidity, were not related to the radon concentration. In the long-term measurements using a passive radon and thoron discriminative monitor, no seasonal variation was observed. The annual average concentrations of radon and thoron were 16 ± 8 and 16 ± 7 Bq m^?3, respectively. There was also no relationship between the two concentrations. The annual average effective dose for office workers in this skyscraper was estimated to be 0.08 mSv y^?1 for 2000 working hours per year. When considering the indoor radon exposure received from their residential dwellings using the annual mean radon concentration indoors in Japan (15.5 Bq m^?3), the annual average effective dose was estimated to be 0.37 mSv y^?1. This value was 31 % of the worldwide average annual effective dose.     

X-ray characterisation of local molecular orientation in the electroclinic effect of surface-stabilised SmA liquid crystals

The local molecular orientation in the electroclinic effect of the chiral smectic A phase in a surface-stabilised cell has been determined using a time-resolved synchrotron X-ray microbeam diffraction technique. Space- and time-resolved X-ray wide-angle halo scattering under an electric field reveals the static and dynamic intralayer molecular orientation. The molecular orientation varies spatially in accordance with the stripe texture and is dependent on the applied voltage. It has been found that the deviation of the molecular orientation from the rubbing direction depends strongly on the sample history. The relation between the apparent molecular orientation and the layer structure is discussed.     

Development of continuous process enabling nanofibrillation of pulp and melt compounding

Microfibrillated cellulose (MFC), a mechanically fibrillated pulp mostly consisting of nanofibrils, is a very attractive material because of its high elastic modulus and strength. Although much research has been done on composites of MFC and polypropylene (PP), it has been difficult to produce such composites at an industrial level because of the difficulties in using MFC in such composites are not only connected to the polarity (that can be improved with compatibilizers), but also with the challenge to make a homogeneous blend of the components, and also the low temperature stability of cellulose that could cause problems during processing. We developed a new processing method which enables continuous microfibrillation of pulp and its melt compounding with PP. Never-dried kraft pulp and powdered PP were used as raw materials to obtain MFC by kneading via a twin-screw extruder. Scanning electron microscopy showed nano to submicron wide fibers entangled in the powdered PP. MFC did not aggregate during the melt compounding process, during which the water content was evaporated. Maleic anhydride polypropylene (MAPP) was used as a compatibilizer to reinforce interfacial adhesion between the polar hydroxyl groups of MFC and non-polar PP. We investigated the effect of MAPP content on the mechanical properties of the composite, which were drastically improved by MAPP addition. Needle-leaf unbleached kraft pulp (NUKP)-derived MFC composites had better mechanical properties than needle-leaf bleached kraft pulp (NBKP)-derived MFC composites. Injection molded NUKP-derived MFC composites had good mechanical and thermal properties. The tensile modulus of 50 wt% MFC composite was two times, and the tensile strength 1.5 times higher than that of neat PP. The heat distortion temperature of 50 wt% MFC content composite under 1.82 MPa flexural load was increased by 53 °C, from 69 to 122 °C. This newly developed continuous process using powder resin has the potential for application at an industrial level.     

Copper-mediated oxidative tandem reactions with molecular oxygen: synthesis of 2-arylbenzoxazinone derivatives from indoles

We developed an efficient method for the transformation of indoles by utilizing a copper catalyst and molecular oxygen as the oxidant. The transformation involves a tandem oxidative process of 2-arylindoles. Our reaction afforded a variety of N-benzoyl anthranilic acids and benzoxazinones. Our investigation revealed that the choice of solvent and additives is critical in these reactions.     

Topography and field effects in the inner side of microvia hole using ToF‐SIMS

We have developed a simple and powerful method, which is called ‘angled sample holder method’, to characterize a topographic structured sample such as microsized via hole of ball grid array using time‐of‐flight SIMS. The diameter of via holes was 100 µm and the depth was 70 µm. To remove the shaded area by incidence primary ion beam and to extract secondary ions from the bottom of a via hole, several types of angled sample holders with compensation steering plate were applied on the basis of simulation results using SIMION code. And the analyses using angled sample holder method enabled us to characterize the bottom and side wall of a via hole in clear. Copyright © 2014 John Wiley & Sons, Ltd.     

Application of plug–plug technique to ACE experiments for discovery of peptides binding to a larger target protein: A model study of calmodulin‐binding fragments selected from a digested mixture of reduced BSA

To discover peptide ligands that bind to a target protein with a higher molecular mass, a concise screening methodology has been established, by applying a “plug–plug” technique to ACE experiments. Exploratory experiments using three mixed peptides, mastoparan‐X, β‐endorphin, and oxytocin, as candidates for calmodulin‐binding ligands, revealed that the technique not only reduces the consumption of the protein sample, but also increases the flexibility of the experimental conditions, by allowing the use of MS detection in the ACE experiments. With the plug–plug technique, the ACE–MS screening methodology successfully selected calmodulin‐binding peptides from a random library with diverse constituents, such as protease digests of BSA. Three peptides with K_d values between 8–147 μM for calmodulin were obtained from a Glu‐C endoprotease digest of reduced BSA, although the digest showed more than 70 peaks in its ACE–MS electropherogram. The method established here will be quite useful for the screening of peptide ligands, which have only low affinities due to their flexible chain structures but could potentially provide primary information for designing inhibitors against the target protein.