Estimation of frequency- and time-dependence of polymer composite system by viscoelasticity in three dimensions

This paper is concerned with the comparison between mechanical properties of polymer composite system and those of each individual constituent. The comparison is mainly performed with respect to the viscoelastic Young's modulus and the relaxation Young's modulus. These mechanical constants may be obtained from the correspondence principle by applying the Laplace transform to the constitutive equation. The calculated results exhibit that the mechanical property of polymer composite system strongly depends on that of matrix with respect to frequency- and time-dependences. That is, as for the vibration and dynamic response in the steady state, the frequency-dependence of peak position about imaginary part of dynamic modulus of composite system is similar to that of matrix, while the magnitude of dynamic modulus depends on volume fraction of dispersed particles to total volume. As for the stress relaxation, the time-dependence of the relaxation Young's modulus of composite system resemble that of matrix each other, while the magnitude depends on the volume fraction of dispersed particles to total volume. This is due to the calculating condition that particle is assumed to be very rigid in comparison with matrix in this paper.     

A useful procedure for diiodination of carbazoles and subsequent efficient transformation to novel 3,6-bis(triethoxysilyl)carbazoles giving mesoporous materials

Bis(pyridine)iodonium tetrafluoroborate (IPy₂BF₄) was successfully used as a diiodination reagent for carbazole and its derivatives to give 3,6-diiodocarbazoles in excellent yield. Subsequent rhodium-catalyzed disilylation of 3,6-diiodocarbazoles with triethoxysilane gave the corresponding 3,6-bis(triethoxysilyl)carbazoles, which are precursors for sol-gel polymerization, in good yield.     

Visual observation of contact-induced intercrystalline migration of aromatic species adsorbed in zeolites by fluorescence microscopy.

Intercrystalline migration and a migration-assisted chemical reaction of adsorbed aromatic species between zeolite particles in physical contact were visualized by fluorescence microscopy coupled with a particle manipulation technique. The luminescence color characteristics of particular zeolite particles originating from the specific photochemistry of adsorbed species was exploited to follow the migration of the molecules. Two examples are shown that are relevant to the visualization of the time-dependent migration process: A one guest-two sets of zeolite crystals system: chrysene (Chry)-loaded zeolite Na+ -X (the sodium form of zeolite X) crystals were placed in contact with unloaded Tl+ -X (thallium-exchanged X) crystals and allowed to stand at room temperature. Initially, the blue fluorescence of Chry was detected only from the Na+ -X particles, but later, the development of green phosphorescence emission was discernible from the Tl+ -X which suggests that Chry migrated from the Na+ -X to the Tl+ -X crystals. A two guest-species systems: Electron-donating Chry-loaded Na+ -X crystals were placed in contact with electron-accepting 1,2,4,5-tetracyanobenzene (TCNB)-loaded Na+ -X or Na+ -Y crystals. With time, the former system (Chry/Na+ -X and TCNB/Na+ -X) gave rise to the emission of Chry-TCNB charge-transfer complexes resulting mainly from the migration of Chry while the latter system (Chry/Na+ -X and TCNB/Na+ -Y) afforded the same emission resulting largely from the migration of TCNB. The present investigation reveals that there is a certain direction for guest migration depending on the zeolite host and the nature of host-guest or guest-guest interaction.     

Prodrugs of 2',3'-dideoxyinosine (DDI): improved oral bioavailability via hydrophobic esters.

Five ester prodrugs of 2'3'-dideoxyinosine (DDI) were synthesized for the purpose of improving oral bioavailability. The prodrugs, acetate (C2-DDI), octanoate (C8-DDI), stearate (C18-DDI), benzoate (Bz-DDI), and hemisuccinate (Suc-DDI) were proved to quantitatively regenerate their parent drug by enzymatic hydrolysis. Though the chemical stability of the prodrugs under acidic conditions was not improved, their solubility in water was significantly decreased by esterification, except for Suc-DDI. Bioavailability was evaluated by oral administration to rats. Two hydrophobic prodrugs (C8-DDI and Bz-DDI) showed higher absolute bioavailability (23.5% and 31.0%, respectively) than did DDI (15.2%), though that of C2-DDI (11.5%) and Suc-DDI (4.5%) was poor.     

PULSE RADIOLYSIS STUDIES IN MODEL LIPID SYSTEMS: FORMATION AND BEHAVIOR OF PEROXY RADICALS IN FATTY ACIDS

Abstract— Radiolytic formation and peroxidation of fatty acid radicals have been investigated by pulse radiolysis techniques in oleate, linoleate, linolenate and arachidonate systems. A strong absorption band at 280 nm associated with conjugated radicals, R_conj, formed in polyunsaturated fatty acid moieties has been used as a probe for kinetic processes occurring at doubly allylic sites in the hydrocarbon chain. Formation of R_conj by O^- has been found to be more efficient than the less selective OH radical. Peroxidation of R_conj is shown to be somewhat slower, ( k _R+ O₂˜ 3 × 10⁸ M ^-1 s^-1), than O₂ reactions with radicals in oleate ( k _R+ O₂= 1 × 10⁹ M ^-1 s^-1). Peroxy radicals generated in these reactions disappear slowly by essentially second order processes (2 k RO₁˜ 10⁷ M ^-1 s^-1). The superoxide radical, O^-₂, shows little if any reactivity towards 0.01 M linolenate or arachidonate over periods of 20 s.     

Synthetic Studies on Sialoglycoconjugates 22: Total Synthesis of Tumor-Associated Ganglioside,Sialyl Lewis X1

ABSTRACT

The first total synthesis of tumor-associated glycolipid antigen, sialyl Lewis X is described. Glycosylation of 2-(trimethylsilyl)ethyl O-(2-acetamido-4,6-O-benzylidene-2-deoxy-β-D-glucopyranosyl)-(1→3)-O-(2,4,6-tri-O-benzyl-β-D-galactopyranosyl)-(1→4)-2,3,6-tri-O-benzyl-β-D-glucopyranoside (1) with methyl 2,3,4-tri-O-benzyl-1-thio-β-L-fuco-pyranoside (4) gave the α-glycoside (5), which was converted by reductive ring-opening of the benzylidene acetal into the glycosyl acceptor (6). Dimethyl(methylthio)sulfonium triflate-promoted coupling of 6 with methyl O-(methyl 5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylonate)-(2→3)-2,4,6-tri-O-benzoyl-1-thio-β-D-galactopyranoside (7) afforded the desired hexasaccharide 8 in good yield. Compound 8 was converted into the α-trichloroacetimidate 11, via reductive removal of the benzyl groups, O-acetylation, removal of the 2-(trimethylsilyl)ethyl group, and treatment with trichloroacetonitrile, which, on coupling with (2S, 3R, 4E)-2-azido-3-O-benzoyl-4-octa-decene-1,3-diol (12), gave the β-glycoside 13. Finally, 13 was transformed, via selective reduction of the azide group, condensation with octadecanoic acid, O-deacylation, and hydrolysis of the methyl ester group, into the title compound 16.     

Observations of surface modifications induced by the multiple pulse irradiation using a soft picosecond x-ray laser beam

To study the interactions between picosecond soft x-ray laser (SXRL) beams and material surfaces, gold (Au), copper (Cu), and silicon (Si) surfaces were irradiated with SXRL pulses having a wavelength of 13.9 nm and a duration of ～7 ps. Following irradiation, the surfaces of the substrates were observed using a scanning electron microscope and an atomic force microscope. With single pulse irradiation, ripple-like structures were formed on the Au and Cu surfaces. These structures were different from previously investigated conical structures formed on an Al surface. In addition, it was confirmed that the development of modified structures, i.e., growth of hillocks on the Au and Cu surfaces, was observed after multiple SXRL pulse exposures. However, on the Si surface, deep holes that seemed to be melted structures induced by the accumulation of multiple pulses of irradiations were found. Therefore, it was concluded that SXRL beam irradiation of various material surfaces causes different types of surface modifications, and the changes in the surface behaviors are attributed to the differences in the elemental properties, such as the attenuation length of x-ray photons.