7,7,8,8‐Tetraaryl‐o‐quinodimethane Stabilized by Dibenzo Annulation: A Helical π‐Electron System That Exhibits Electrochromic and Unique Chiroptical Properties

When two benzene rings are fused to a tetraaryl‐o‐quinodimethane skeleton, sterically hindered helical molecules 1 acquire a high thermodynamic stability. Because the tetraarylbutadiene subunit contains electron‐donating alkoxy groups, 1 undergo reversible two‐electron oxidation to 2 ²⁺, which can be isolated as deeply colored stable salts. Intramolecular transfer of the point chirality (e.g., sec‐butyl) on the aryl groups to helicity induces a diastereomeric preference in dications 2 b ²⁺ and 2 c ²⁺, which represents an efficient method for enhancing circular‐dichroism signals. Thus, those redox pairs can serve as new electrochiroptical response systems. X‐ray analysis of dication 2 ²⁺ revealed π–π stacking interaction of the diarylmethylium moieties, which is also present in solution. The stacking geometry is the key contributor to the chirosolvatochromic response.     

Synthetic study of kosinostatin aglycone: synthesis of BCDE rings using alkoxycarbonylmethylation of diazonaphthoquinone

A synthetic study of kosinostatin aglycone is reported. Synthesis of key intermediate lactone 3, which corresponds to the BCDE ring fragment, was accomplished, and the precursor BCD ring fragment 5 was synthesized via two routes. First, 5 was synthesized from 2,5-dimethoxybenzaldehyde 16 by the combination of typical known transformations including efficient application of non-aqueous OsO₄ oxidation in the presence of PhB(OH)₂. However the synthesis required 15 long steps, and its main difficulty was ortho-alkoxycarbonylmethylation of 1-naphthol. Next we attempted to apply our recently developed alkoxycarbonylmethylation of diazonaphthoquinone for the synthesis of 5, and 5 was successfully synthesized in 9 steps from the same starting compound 16. Finally, 5 was stereoselectively converted to lactone 3 via trifluoroacetic acid-mediated cyclization of the 3,4-epoxycylohexanecarboxylic acid derivative.     

Graphene Nanocomposites Based Electrochemical Sensing Platform for Simultaneous Detection of Multi-drugs

Three reduced graphene oxide nanocomposites were employed to achieve the simultaneous electrochemical determination of multi-drugs including acetaminophen (ACTM), carbendazim (CB) and ciprofloxacin (CFX). All nanocomposite modified electrodes showed improved current responses for three drugs. Notably cauliflower-like platinum nanoparticles decorated reduced graphene oxide modified electrode (or Pt−RGO/GCE) exhibited the best performance in terms of electrochemical stability. Using Pt−RGO/GCE, the linear detect ranges of 30–120 μM, 25–115 μM and 10–25 μM, and detection limit values of 3.49, 2.96, and 1.53 μM were achieved for ACTM, CB and CFX respectively. The electrode was further used for the successful determination of above drugs in tap and river water using differential pulse voltammetry. From the obtained results, we believe that Pt-RGO/GCE is highly promising for the fabrication of robust electrochemical sensors for simultaneously determining ACTM, CB and CFX or similar types of drugs in the future.     

Control of diameter of ZnO nanorods grown by chemical vapor deposition with laser ablation of ZnO

We made a study of controlling diameters of well-aligned ZnO nanorods grown by low-pressure thermal chemical vapor deposition combined with laser ablation of a sintered ZnO target, which was developed by us. Until now, it has been impossible to control diameters of ZnO nanorods, while the growth orientation was maintained well-aligned. In this study we developed a multi-step growth method to fabricate well-aligned nanorods whose diameters could be controlled. Metal Zn vapor and O₂ are used as precursors to grow ZnO nanorods. N₂ is used as a carrier gas for the precursors. A substrate is an n-Si (111) wafer. A sintered ZnO target is placed near the substrate and ablated by a Nd–YAG pulsed laser during ZnO nanorod growth. The growth temperature is 530 C and the pressure is 66.5 Pa. A vertical growth orientation of ZnO nanorods to the substrate is realized in the first-step growth although the diameter cannot be controlled in this step. When an O₂ flow rate is 1.5 sccm, well-aligned nanorods with 100 nm diameter are grown. Next, the second-step nanorods are grown on only the flat tip of the first-step nanorods. The diameters of the second-step nanorods can be controlled by adjusting the O₂ flow rate, and the growth direction is kept the same as that of the first-step nanorods. When the O₂ flow rate in second-step growth is smaller than 0.6 sccm, the diameter of the second-step nanorods is 30–50 nm. When the O₂ flow rate is between 0.75 and 3.0 sccm, the diameter is almost same as that of the first-step nanorods. When the O₂ flow rate is larger than 4.5 sccm, the diameter is increased with increasing O₂ flow rate. Further, the third-step ZnO nanorods with gradually increased diameters can be grown on the second-step nanorods with 1.5 sccm O₂ flow rate and without laser ablation.     

Quantitative Detection for Porphyromonas gingivalis in Tooth Pocket and Saliva by Portable Electrochemical DNA Sensor Linked with PCR

Here, a quantitative electrochemical analysis of periodontal bacteria in gingival crevicular fluid (GCF) and saliva by direct polymerase chain reaction (PCR) is presented. The electrochemical measurement was performed by mixing with PCR products and electrochemical indicator (bisbenzimidazole trihydrochloride). The peak current of indicator is reduced due to slower diffusion when the dye intercalates into the amplified DNA, and the degree of reduction in the peak current is correlates with the quantity of amplified DNA. Therefore, a quantitative analysis is possible by using our electrochemical method at the end point of PCR. In the GCF testing, The number of Porphyromonas gingivalis (Pg) detected by our electrochemical method at the end point of PCR were almost same compared with that were calculated by the conventional method of quantitative real? time PCR. In the saliva testing, the relationship between number of Pg in saliva and average pocket depth, and age‐dependence were also clearly observed. Since the saliva sample is obtained in a non‐invasive manner, this method is useful for the primary screening of periodontal disease. Moreover, our detection method is simple and uses a hand‐held potentiostat making it suitable for development of an on‐site periodontal diagnosis system.     

Development of a New Benzylating Reagent Spontaneously Releasing Benzyl Cation Equivalents at Room Temperature

A new O‐benzylating reagent, that is, 4‐(4,6‐diphenoxy‐1,3,5‐triazin‐2‐yl)‐4‐benzylmorpholinium trifluoromethanesulfonate (DPT‐BM), has been developed. Benzyl cation equivalents are generated from DPT‐BM by dissolving the compound in a solvent at room temperature under non‐acidic conditions. The benzylation of various alcohols by using a combination of DPT‐BM and magnesium oxide provided the benzyl ethers in good yields.     

Structural Insights into Rice Straw Pretreated by Hot-Compressed Water in Relation to Enzymatic Hydrolysis

Pretreatment-induced structural alteration is critical in influencing the rate and extent of enzymatic saccharification of lignocellulosic biomass. The present work has investigated structural features of rice straw pretreated by hot-compressed water (HCW) from 140 to 240 °C for 10 or 30 min and enzymatic hydrolysis profiles of pretreated rice straw. Compositional profiles of pretreated rice straw were examined to offer the basis for structural changes. The wide-angle X-ray diffraction analysis revealed possible modification in crystalline microstructure of cellulose and the severity-dependent variation of crystallinity. The specific surface area (SSA) of pretreated samples was able to achieve more than 10-fold of that of the raw material and was in linear relationship with the removal of acetyl groups and xylan. The glucose yield by enzymatic hydrolysis of pretreated materials correlated linearly with the SSA increase and the dissolution of acetyl and xylan. A quantitatively intrinsic relationship was suggested to exist between enzymatic hydrolysis and the extraction of hemicellulose components in hydrothermally treated rice straw, and SSA was considered one important structural parameter signaling the efficiency of enzymatic digestibility in HCW-treated materials in which hemicellulose removal and lignin redistribution happened.     

Static light scattering from poly(ethylene oxide) in methanol

Static light scattering measurements were performed on dilute solutions of monodisperse poly(ethylene oxide) (PEO) in methanol at 25°C. PEOs of five different molecular weights ranging from nominal M_w = 8.6 × 10⁴ to 9.13 × 10⁵ were used. Linear Zimm plots were obtained for all the PEO samples: no downturn was observed at small angles, indicating that no large aggregates of PEO molecules exist in the solution. From the plots, values of the weight-average molecular weight, M_w, the radius gyration, R_G, and the second virial coefficient, A₂, were successfully determined for respective PEOs. Observed relationship between R_G and M_w indicates that methanol is certainly a good solvent for the polymer. © 1996 John Wiley & Sons, Inc.