Screening effect diverts the swimming directions from diaphototactic to positive phototactic in a disk-shaped green flagellate Mesostigma viride

We found diaphototactic behavior (i.e. the cells swim perpendicularly with respect to the incident light) in a strain with colorless eyespot of a unicellular disk-shaped green flagellate Mesostigma viride. Lacking pigments completely in the eyespot, the screening effect in this strain was due only to the central part of the chloroplast whose cross section was thin. The diaphototaxis was most obvious when unilateral green stimulus light (520-580 nm) was given, whereas positive phototaxis appeared when given blue light (430-490 nm). The choice between diaphototaxis and (ordinary) phototaxis depended entirely on the transmission (%T) of the cell body against each wavelength of the stimulus: the green light penetrated well (%T > 90%), whereas the blue light was considerably shaded by the chloroplast (50% < %T < 70%). The fraction of positive phototactically behaving cells against each wavelength was in proportion to the front-to-back contrast value obtained at each individual wavelength. The fraction of diaphototaxis was inversely proportional to it. In addition, bilateral stimulus irradiations to wild-type cell with colored eyespot provided useful information about the principle of the diaphototactic steering.     

Massadine,a novel geranylgeranyltransferase type I inhibitor from the marine sponge Stylissa aff. massa

Massadine, a highly oxygenated alkaloid, was isolated from the marine sponge Stylissa aff. massa as an inhibitor of geranylgeranyltransferase type I (GGTase I). The structure of massadine has been deduced from spectral data. Massidine inhibited GGTase I from Candida albicans with an IC(50) value of 3.9 microM. [structure: see text]     

Selective synthesis of poly(p‐oxybenzoyl) by fractional polycondensation: Enhancement of selectivity by shearing

The influence of shear flow, especially the timing for the application of shearing, was examined to enhance the selectivity for the preparation of poly(p‐oxybenzoyl) (Pp‐OB) by using hydrodynamically induced phase separation during polymerization of 4‐(4‐acetoxybenzoyloxy)benzoic acid (p‐ABAD) and m‐acetoxybenzoic acid (m‐ABA). The polymers containing few m‐oxybenzoyl (m‐OB) moieties were obtained as precipitates even at high content of m‐OB moiety in feed (χ_f) under shear flow. The content of m‐OB moiety in the precipitates (χ_p) prepared under shearing throughout the polymerization at the shear rate (γ) of 489 s^?1 was 6.3 mol % even at χ_f of 60 mol %. Especially, the Pp‐OB was obtained as the precipitates at χ_f of less than 50 mol %. The timing of the application of the shearing influenced the selectivity significantly, and the shearing just after the precipitation of the oligomers started was quite efficient to enhance the selectivity more. The χ_p of the precipitates prepared with shearing at γ of 489 s^?1 just after the precipitation was only 3.9 mol % even at χ_f of 60 mol %. The shear flow reduced the difference in the reactivity between p‐ABAD and m‐ABA, resulting in the decrease in the selectivity with regard to the formation of p‐oxybenzoyl homo‐oligomer. However, the shear flow enhanced the difference in the miscibility between homo‐oligomers and co‐oligomers. This change in the miscibility by shear flow brought about the more rapid precipitation of homo‐oligomers, leading to the enhancement of the selectivity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Effect of refraction index and thickness of the light guide in the position-sensitive gamma-ray detector using compact PS-PMTs

We constructed a position-sensitive gamma-ray detector consisting of an array of BGO scintillators, a light guide and compact PS-PMTs. The effects of refractive index and thickness of the light guide of a glass plate on the detector performance were investigated. A light guide with higher refractive index and smaller thickness is found better for a good spatial resolution.     

High resolution imaging of contact potential difference using a novel ultrahigh vacuum non-contact atomic force microscope technique

An ultrahigh vacuum scanning Kelvin probe force microscope (UHV SKPM) based on the gradient of electrostatic force was developed using the technique of a UHV non-contact atomic force microscope (NC-AFM) capable of atomic level imaging, and used for simultaneous observation of contact potential difference (CPD) and NC-AFM images. The CPD images with a potential resolution of less than 10 meV were observed in the UHV SKPM, demonstrating an atomic level resolution. The change of potential corresponding to the charges on the insulated surface of polypropylene have been observed in UHV SKPM. We also demonstrated a reliable method to obtain the CPD from the bias voltage dependence curves of the frequency shift in all of the scanning area. The results are consistent with comparing the barrier height images in that the work functions of adatoms are greater than the work function of corner holes.     

Long-range migration of a water molecule to catalyze a tautomerization in photoionization of the hydrated formamide cluster

The dynamics on the vacuum-ultraviolet one-photon ionization of a formamide-water cluster is investigated by a combination of theoretical reaction-path search and infrared spectroscopic methods. A keto-enol tautomerization of the formamide moiety occurs after photoionization by a catalytic action of the water molecule accompanied with its long-distance migration; the water molecule in the cluster migrates almost one turn around the formamide moiety. During the migration, the water molecule abstracts the proton of CH in the formamide moiety and carries it to the O atom side in the carbonyl group through a "catch and release"-type catalytic action.     

Is the neutral Knoevenagel reaction initiated by the carbanion formation?

The title reactions were studied by means of the density functional theory calculations. A base promoted reaction (called here ‘B’) was traced in a model composed of benzaldehyde, malononitrile, and (H₂O)₁₁. A neutral model (‘N’) of Ph‐CHO, H₂C(CN)₂ and (H₂O)₁₂ was also examined in line with a reported clean reaction. It was found that the ion pair of HC(CN) and H₃O⁺ is generated at the first step for N. For B, there are five elementary processes, and for N, four ones were obtained. By RB3LY/6‐311 + G** SCRF = PCM//RB3LYP/6‐31(+)G* energy calculations, the rate determining steps for both B and N reactions are the second proton removal, TS5(B) and TS3(N), respectively. In both B and N, the neutral species Ph(HO)HC‐CH(CN)₂ is the key intermediate. Copyright © 2010 John Wiley & Sons, Ltd.     

Heterogeneous polycondensation for composition control of poly(p‐mercaptobenzoyl‐co‐p‐benzamide) by shearing

Composition control of aromatic poly(thioester‐amide) was examined by the reaction‐induced phase separation during polymerization of S‐acetyl‐4‐mercaptobenzoic acid (AMBA) and p‐acetylaminobenzoic acid (AABA) in aromatic solvent. The poly(thioester‐amide)s were obtained as precipitates and their yields became lower at the middle range of the content of AMBA in feed (χ_f). The contents of p‐mercaptobenzoyl (MB) moiety (χ_p) in the precipitates prepared without shearing were in good agreement with the χ_f values. In contrast to this, the χ_p values of the precipitates prepared at χ_f of 50–70 mol % under shearing were much lower than the χ_f values. The reaction rate of AMBA increased with shearing, whereas that of AABA was unchanged by shearing. This shearing effect on the reaction rates accelerated to form the homo‐oligomers. The solubility of MB oligomers enhanced by shearing, whereas that of p‐benzamide oligomers did not enhance owing to the strong interaction through hydrogen bonding. The MB oligomers were inhibited to be precipitated, resulting in the lower χ_p values than the χ_f values. The composition could be controlled by the application of the shearing to the heterogeneous polymerization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4301–4308