Photorefractive Four-Wave Mixing Switches Utilizing Pockels Effect -Longitudinal and Lateral Switches-

We carried out detailed calculations for photorefractive wave-mixing switches based on one of three crystals with high electro-optic coefficients, namely, BaTiO₃, Strontium Barium Niobate (SBN (0.75)), and Potasium Sodium Strontium Barium Niobate (KNSBN). A comparison of results for the three crystals shows that a 0_-cut BaTiO³ crystal is suitable for a longitudinal switch and requires a voltage of about 80 for a 2-mm-thick crystal to induce sufficient phase mismatch. The electrodes must be transparent for the incident and diffracted beams. A 45_-cut SBN (0.75) crystal, however, is suitable for a lateral switch and requires a voltage of about 150 for a 1-mm-wide crystal. The electrodes do not need to be transparent.     

Spin and quark states in the probability representation of quantum mechanics

A short review of the general principles of constructing tomograms of spin and quark states is presented.     

Color Zone Map in Peripheral Vision at Various Illuminance Levels

We measured the entire region of mesopic and photopic vision to determine the color zone covering the visual field with unique red, yellow, green, and blue hue components. Eight kinds of test stimuli in the natural color system (NCS) color notation system were used. These stimuli were presented at horizontal and vertical meridians, and at meridians inclined at 45° angles. The illuminance level was set at six levels: 0.01 lx-1000 lx. The evaluation method measured chromatic, white, and black components as well as the hue component of the stimuli. Results show that the color zone of the retina extended further into the periphery with increasing illuminance; the response of opponent colors y-b was shown to be greater than that of the opponent colors r-g.     

A realistic coronary artery phantom for particle image velocimetry

Myocardial infarction results from the rupture of an atherosclerotic plaque, which occurs in response to both mechanical stress and inflammatory processes. In order experimentally observe flow into atherosclerotic coronary artery morphologies, a novel technique for molding realistic compliant phantom featuring injection-molded inclusions and multiple layers has been developed. This transparent phantom allows for particle image velocimetry (PIV) flow analysis and can supply experimental data to validate computational fluid dynamics algorithms and hypothesis.     

Real-time color holographic interferometry devoted to 2D unsteady wake flows

A new optical technique based on real time holographic interferometry in true colors has been implemented around the transonic wind tunnel of the ONERA-Lille center to analyze 2D unsteady wake flows. Tests realized in color interferometry, real time and double exposure, use simultaneously three wavelengths of a continuous waves laser (argon and krypton mixed) and holograms are recorded on silver-halide single-layer panchromatic Slavich PFG03c plates. The very principle of real-time true color holographic interferometry uses three primary wavelengths (red, green and blue) to record, under no-flow conditions, the interference among the three measurement beams and the three reference beams simultaneously on a single reference hologram. After the holographic plate is developed, it is placed on the test setup again in the position it occupied during exposure and the hologram is illuminated again by the three reference beams and three measurement beams. A flat, uniform color can then be observed behind the hologram. So a horizontal, vertical, or even circular fringe pattern can be formed and the achromatic central fringe can be made out very clearly. The single color is used to determine the path difference zero on the interferograms. The flow studied was the unsteady flow downstream of a cylinder placed crosswise in the test section. A sequence of hundred interferograms was recorded on the flow around the cylinder at Mach 0.37. The vortex formation and dissipation phases can be seen very clearly, along with the fringe beat to either side of the cylinder.     

Use of ultrafine-dispersed nanodiamond for selective deposition of boron-doped diamond films

A suspension of ultrafine-dispersed nanodiamond was used for introducing (in particular, selectively) high-density centers of diamond nucleation on various substrates. High-quality doped diamond films to be used as electrochemistry electrodes were deposited from the gas phase in a microwave discharge on certain substrates treated using ultrafine-dispersed nanodiamond. A uniform distribution of nucleation centers with concentrations greater than 10¹⁰ cm^-2 on silicon substrates was obtained. Electrochemical current-potential curves were measured for continuous films. Diamond meshes of different transparency were grown using selective nucleation. Successful production of high-quality doped diamond meshes gives grounds to consider them the most promising electrodes for use in electrochemistry.     

Chain decay of low-angle tilt boundaries in nanocrystalline materials

In terms of two-dimensional dislocation-disclination dynamics, a theoretical model is developed to describe the decay of a low-angle tilt boundary in a deformed nanocrystalline material under the action of an externally applied elastic stress and of the elastic field of a neighboring decayed boundary. The critical external stresses are calculated at which the boundary decays and the dislocations making up this boundary either are trapped by the boundary that decayed earlier or break away from both boundaries. The decay of a low-angle tilt boundary is shown to result in a substantial decrease in the critical decay stresses for the neighboring boundaries, which can cause an avalanche-like chain decay of low-angle boundaries yielding high-density ensembles of mobile dislocations capable of carrying substantial plastic deformations and of forming shear bands in deformed nanocrystalline materials.     

Investigation of the X-ray radiation produced by a diffusive discharge in the rod-plane geometry under atmospheric pressure

Spatial parameters of the X-ray radiation produced by a high-voltage nanosecond discharge evolving in air under atmospheric pressure in the rod (cathode)-plane electrode system with a 10-cm electrode spacing are studied experimentally. A ∼170-ns voltage pulse with an amplitude of ∼200 kV and 10-ns rise time is applied to the cathode. The photoelectronic method is used to study, under the same conditions, the integrated (over the gap) characteristics of the radiation, in particular, the duration of its generation. It is found that, when the size of the X-ray source is not smaller than that of the discharge region of diffusive luminescence, radiation from the cathode region of the gap is primarily observed (i.e., from the region where the electric field distribution is sharply inhomogeneous). The X-ray generation is usually observed after the bridging of the discharge gap, the X-ray pulse having a rise time of ∼3 ns, a duration of ∼10 ns, and an effective radiation energy of ∼6 keV.     

Numerical simulation of the translational nonequilibrium zone behind a shock-wave front

The translational nonequilibrium zone in a shock wave is considered for a gas consisting of light particles and a small addition of heavy particles. The gas is taken to be two-dimensional, and long-range forces are assumed to be absent. In the framework of this approximation, a program for molecular dynamics simulation of the gas is developed. It is applied to calculate a particle distribution function in the shock wave, to analyze the time evolution of the distribution function, and to study its dependence on the gas composition.