Structure of the Ba-induced Si(111)- (3 x 2) reconstruction

The Ba/Si(111) surface, previously known as a 3 x 1 phase, is found to have a 3 x 2 periodicity and a semiconducting band gap. The substrate reconstructs into the honeycomb chain-channel (HCC) structure with Ba atoms in the channel, as in the alkali-metal-induced Si(111)-(3 x 1). However, the metal coverage is determined to be 1/6 monolayers, half the alkali-metal coverage. We propose that the structure and the metal coverage determined for the Ba adsorbate is universal for other alkaline-earth-metal adsorbates. With the alkali-metal-induced 3 x 1 case, our results lead to a rule that one donated electron per 3 x 1 surface unit is necessary to stabilize the HCC reconstruction of Si.     

Modified gap states in Fe/MgO/SrTiO3 interfaces studied with scanning tunneling microscopy

The geometric and electronic structures of Fe islands on MgO film layers were studied with scanning tunneling microscopy and spectroscopy. The MgO layers were grown on a Nb-doped single crystal SrTiO₃ (100) surface. Deposited Fe atoms aggregate into islands, the height and diameter of which are about 2.5 and 9.4 nm respectively. Fe islands modify the electronic structure of MgO surface; a ring type depression in the scanning tunneling microscope topography appears by lowered local electron density of states around Fe islands. We find that adsorbed Fe atoms reduce the gap states of MgO layers around Fe islands, which is attributed to the reason for the depletion of the electronic density of states.     

Laser-driven high-resolution patterning of indium tin oxide thin film for electronic device

We here introduce a laser-driven process to pattern transparent thin films on transparent substrates. This method utilizes a pre-patterned metal film as the dynamic release layer and the transparent thin film is selectively removed by a thermo-elastic force laser-induced in the underlying metal layer. High-fidelity indium tin oxide (ITO) thin film patterns were fabricated on plastic and glass substrates using a pulsed Nd:YAG laser. Tens of square centimeters could be patterned with several pulse shots. We fabricated a pentacene thin film transistor with ITO source and drain electrodes and observed a very low off-current level. This tells that the channel area between ITO electrodes was completely etched out by this laser-driven process. Combined with the absence of photoresist and chemical etching steps, this method provides a simple high-resolution route to pattern transparent thin films over large areas at low temperatures.     

Cathode-sheath driven low-speed aerodynamic flow actuation using direct-current surface glow discharges

Flow actuation by a continuous/pulsed, direct-current (DC) surface glow discharge is explored. The discharge comprises an array of pin electrode pairs flush mounted on a dielectric actuator surface that lies adjacent to stagnant air. Strong electrostatic fields produced in the cathode sheath region of the discharge provides a motive force on the ions which in turn drag the background gas resulting in directed air flow from the anode to the cathode. The induced flow velocity is estimated by particle image velocimetry (PIV) at 10 Hz with TiO₂ seeding. For a pulsed DC discharge with peak power of 5 W per electrode pair, the induced flow velocity reaches peak values of about 1.7 m/s which is comparable to dielectric-barrier discharge (DBD) or corona discharge actuators. The actuation effect quantified by the magnitude of induced velocity increases as the pulse frequency increases from 0 to 1 kHz. The actuation effect decreases for further increase in frequency above 1 kHz. Decreased actuation effect at high frequency is accompanied by structural change in the discharge. At fixed frequency of 1 kHz, flow actuation effect is highest for a square wave pulse with a duty cycle of 50% indicating that pulsed DC discharges produces better actuation than continuous DC with a corresponding reduction in energy consumption.     

Topological defects in spherical nematics

We study the organization of topological defects in a system of nematogens confined to the two-dimensional sphere (S2). We first perform Monte Carlo simulations of a fluid system of hard rods (spherocylinders) living in the tangent plane of S2. The sphere is adiabatically compressed until we reach a jammed nematic state with maximum packing density. The nematic state exhibits four +1/2 disclinations arrayed on a great circle. This arises from the high elastic anisotropy of the system in which splay (K1) is far softer than bending (K3). We also introduce and study a lattice nematic model on S2 with tunable elastic constants and map out the preferred defect locations as a function of elastic anisotropy. We find a one-parameter family of degenerate ground states in the extreme splay-dominated limit K_{3}/K_{1}-->infinity. Thus the global defect geometry is controllable by tuning the relative splay to bend modulus.     

Long distance laser ultrasonic propagation imaging system for damage visualization

Wind turbine blade failure is the most prominent and common type of damage occurring in operating wind turbine systems. Conventional nondestructive testing systems are not available for in situ wind turbine blades. We propose a portable long distance ultrasonic propagation imaging (LUPI) system that uses a laser beam targeting and scanning system to excite, from a long distance, acoustic emission sensors installed in the blade. An examination of the beam collimation effect using geometric parameters of a commercial 2 MW wind turbine provided Lamb wave amplitude increases of 41.5 and 23.1 dB at a distance of 40 m for symmetrical and asymmetrical modes, respectively, in a 2 mm-thick stainless steel plate. With this improvement in signal-to-noise ratio, a feasibility study of damage detection was conducted with a 5 mm-thick composite leading edge specimen. To develop a reliable damage evaluation system, the excitation/sensing technology and the associated damage visualization algorithm are equally important. Hence, our results provide a new platform based on anomalous wave propagation imaging (AWPI) methods with adjacent wave subtraction, reference wave subtraction, reference image subtraction, and the variable time window amplitude mapping method. The advantages and disadvantages of AWPI algorithms are reported in terms of reference data requirements, signal-to-noise ratios, and damage evaluation accuracy. The compactness and portability of the proposed UPI system are also important for in-field applications at wind farms.     

Evaluation of the dosimetric characteristics of a radiophotoluminescent glass dosimeter for high-energy photon and electron beams in the field of radiotherapy

We aimed to evaluate the suitability of a glass dosimeter (GD) for high-energy photon and electron beams in experimental and clinical use, especially for radiation therapy. We examined the expanded dosimetric characteristics of GDs including dose linearity up to 500 Gy, uniformity among GD lots and for individual GDs, the angular dependence, and energy dependence of 4 therapeutic x-ray qualities. In addition, we measured the dosimetric features (dose linearity, uniformity, angular dependence, and energy dependence) of the GD for electron beams of 10 different electron energy qualities. All measurements with the exception of dose linearity for photon beam were performed in a water phantom. For high-energy photon beams, dose linearity has a linear relationship for a dose ranging from 1 to 500 Gy with the coefficient of determination; R² of 0.998. The uniformity of each GD of dose measurements was within ±0.5% for four GD lots and within ±1.2% for 80 GDs. In terms of the effects of photon beam angle, lower absorbed doses of within 1.0% were observed between 60° and 105° than at 90°. The GD energy dependence of 4 photon beam energy qualities was within ±2.0%. On the other hand, the result of the dose linearity for high-energy electron beams showed well fitted regression line with the coefficient of determination; R² of 0.999 between 6 and 20 MeV. The uniformity of GDs exposed to the nominal electron energies 6, 9, 12, 16, and 20 MeV was ±1.2%. In terms of the angular dependence to electron beams, absorbed doses were within 2.0% between 60° and 105° than at 90°. In evaluation of the energy dependence of the GD at nominal electron energies between 5 and 20 MeV, we obtained responses between 1.1% and 3.5% lower than that for a cobalt-60 beam. Our results show that GDs can be used as a detector for determining doses when a high-energy photon beam is used, and that it also has considerable potential for dose measurement of high-energy electron beam.     

NMR studies on polarized12B implanted in highly oriented pyrolytic graphite

NMR measurements on¹²B nuclei implanted in a thin sheet of highly oriented pyrolytic graphite (Grafoil) have been made to study the magnitude of the polarization of¹²B and its electric quadrupole coupling. The magnitude of the residual polarization of¹²B held in carbon material is of crucial importance to the experiment measuring the average polarization of¹²B produced in the muon capture by¹²C. It was found that the polarization of¹²B can be maintained at 101.0±2.2% in Grafoil under a magnetic field of 3 kG. The electric quadrupole coupling was determined to bee ² qQ/h=+1207.3±8.2 kHz. From the magnitude and the sign of the electric field gradienteq, the location of¹²B was found to be a substitutional site in the carbon lattice. The anomalous B-C bond involving thesp ₂ hybrid orbitals with partially filledp _z electrons is also discussed.