基于目标信息系统学习的多准则决策方法

给出目标信息系统学习的多准则决策方法，建立多准则决策的规则学习模型，讨论该模型的性质。该模型优于Z．Pawlak方法，将规则提取与信息融合为一体。也优于AHP等模型，具有简洁性．通过实例计算，取得了满意结果。     

过渡金属化合物OsB2与OsO2低压缩性的第一性原理计算研究

利用基于密度泛函理论平面波赝势法的第一性原理计算,研究了过渡金属化合物OsB2和OsO2的金红石相、黄铁矿相与萤石相三种结构在高压下的状态方程和结构特性以及OsO2可能的高压相变.理论计算结果支持OsB2与OsO2的萤石相是潜在超低可压缩性的硬性材料.同时,也分析了它们的电子结构,力求理解大体变模量和高硬度的微观机制.结果表明,可以利用过渡金属高的价电子浓度,掺入硼、氧、碳、氮等轻的元素形成强的方向键,这可能提供了一种合成超硬材料的新途径.     

The effect of hydrogen addition on flammability limit and NOx emission in ultra-lean counterflow CH4/air premixed flames

The effect of hydrogen addition to ultra lean counterflow CH₄/air premixed flames on the extinction limits and the characteristics of NO_x emission was investigated by numerical simulation. Detailed chemistry and complex thermal and transport properties were employed. The results show that the addition of hydrogen can significantly enlarge the flammable region and extend the flammability limit to lower equivalence ratios. If the equivalence ratio is kept constant, the addition of hydrogen increases the emission of NO in a flame due to the enhancement in the rate of the NNH or N₂O intermediate NO formation routes. The addition of hydrogen causes a monotonic decrease in the formation of NO₂ and N₂O, except flames near the extinction limits, where the emission of NO₂ and N₂O first increases, and then decreases with the increase in the fraction of hydrogen. Overall, hydrogen enrichment technology allows stable combustion under ultra lean conditions, resulting in significant CO₂ and NO emission reduction.     

Effects of B′-site transition metal on the properties of double perovskites Sr2FeMO6 (M=Mo, W): B′ 4d-5d system

The crystal structure, magnetic and magnetotransport properties of the variation of B′-site transition metal in Sr₂FeMO₆ (M=Mo, W) with double perovskites structure have been investigated systematically. Measurements of magnetization vs. temperature at H=5 T show that Sr₂FeMoO₆ is a ferromagnet and Sr₂FeWO₆ is an antiferromagnet with T_N∼35 K. Additionally, the large magnetoresistance ratio (MR) of ∼22% (H=3 T) at room temperature (RT) was observed in the Sr₂FeWO₆ compound. However, the Sr₂FeMoO₆ compound did not show any significant MR even at high fields and RT (MR∼1%; H=3 T and 300 K). The implications of these findings are supported by band structure calculations to explain the interaction between the 4d(Mo) and 5d(W) orbitals of transition metal ions and oxygen ions.     

球面激波在固壁的马赫反射

本文对金属丝电爆炸产生球面激波在固壁上的马赫反射作了研究。由高速纹影摄影系统将反射图像拍摄下来,从而测量出马赫杆在壁面的马赫数,进而得到超压以及三波点迹线,实验结果与我们的数值计算结果作了比较,二者比较吻合。     

类金钢石非晶碳薄膜的光吸收和光致发光研究

我们用激光轰击石墨靶成功地制备出类金刚石无氢非晶碳薄膜.测量了光学吸收、光致发光及其随入射光强度的变化关系.结果表明,这种薄膜具有类金刚石的性质,光学带隙在1.67-2.25eV,发光在可见光区呈宽带结构.低激发强度下发光强度超线性变化,而在高激发强度下则为线性发光.我们用非成对载流子复合的模型对结果给出了合理的解释.用带尾态饱和的模型解释了发光峰值随激发光强增加而蓝移的现象.     

Ripening of single-layer InGaAs islands on GaAs（001）

The present paper discusses our investigation of InGaAs surface morphology annealed for different lengths of time.After annealing for 15 min,the ripening of InGaAs islands is completed.The real space scanning tunneling microscopy(STM) images show the evolution of InGaAs surface morphology.A half-terrace diffusion theoretical model based on thermodynamic theory is proposed to estimate the annealing time for obtaining flat morphology.The annealing time calculated by the proposed theory is in agreement with the experimental results.     

Comparative investigation of resistance and ability to trigger high voltage discharge for single and multiple femtosecond filaments in air

A comparative investigation of resistance and ability to trigger high voltage (HV) discharge for single filament (SF) and multiple filaments (MF) has been carried out. The experimental results show that the trend of the breakdown threshold of the SF exactly follows that of its resistance, but this is not the case for the MF. The MF's resistance is much smaller than SF's. However, the MF shows a bit higher HV breakdown threshold than the SF. The underlying physics is that the measured resistance of the MF is collectively contributed by every filament in the MF while the HV breakdown threshold is determined by only one single discharging path.     

ICF靶丸装配误差检测

针对激光惯性约束聚变装置中靶丸装配误差检测困难、要求精度高的特点,研制了一套用于微靶装配参数检测的测量系统。提出了一种基于激光与CCD的复合式测量方法,建立了二者数据融合的数学模型,通过标定空间位置关系有效地把二者的测量数据融合到同一个坐标系中,从而实现了高精度三维测量。分两种情况讨论了靶丸装配误差的检测方法。实验结果验证了这两种方法的可行性,并比较了两种方法的测量精度,其极限测量误差均不超过3 m。