Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries

A novel process is proposed for synthesis of spinel LiMn₂O₄ with spherical particles from the inexpensive materials MnSO₄, NH₄HCO₃, and NH₃H₂O. The successful preparation started with carefully controlled crystallization of MnCO₃, leading to particles of spherical shape and high tap density. Thermal decomposition of MnCO₃ was investigated by both DTA and TG analysis and XRD analysis of products. A precursor of product, spherical Mn₂O₃, was then obtained by heating MnCO₃. A mixture of Mn₂O₃ and Li₂CO₃ was then sintered to produce LiMn₂O₄ with retention of spherical particle shape. It was found that if lithium was in stoichiometric excess of 5% in the calcination of spinel LiMn₂O₄, the product had the largest initial specific capacity. In this way spherical particles of spinel LiMn₂O₄ were of excellent fluidity and dispersivity, and had a tap density as high as 1.9 g cm^–3 and an initial discharge capacity reaching 125 mAh g^–1. When surface-doped with cobalt in a 0.01 Co/Mn mole ratio, although the initial discharge capacity decreased to 118 mAh g^–1, the 100th cycle capacity retention reached 92.4% at 25°C. Even at 55°C the initial discharge capacity reached 113 mAh g^–1 and the 50th cycle capacity retention was in excess of 83.8%.     

混合金属氧化物柱撑α-磷酸锆的研究

制备、表征了混合铝/铬金属氧化物柱撑α-磷酸锆(Al/Cr-ZrP),并对胶体化使用有机胺的种类、柱化液金属离子浓度以及金属离子用量等因素进行了研究。研究表明以乙醇胺为胶体化有机胺比使用正丙胺为胶体化有机胺所得到的产物的层间距更大;采用较低金属离子浓度、较高金属离子用量有利于Al/Cr-ZrP的合成。在Al/Cr比为1、以正丙胺为胶体化有机胺、金属离子浓度为0.067mol·L^-1、金属离子用量为6.67CEC的条件下,制备出了混合金属氧化物柱撑α-磷酸锆,其层间距可达3.60nm,     

SUPERCRITICAL-PHASE PROCESS FOR SELECTIVE SYNTHESIS OF HEAVIER HYDROCARBONS FROM SYNGAS OVER ARu/Al_2O_3 CATALYST

在Ｒｕ／Ａｌ２Ｏ３催化剂上进行了超临界条件下的固定床费托合成。研究了催化剂孔尺寸、α－Ｃ１４烯共进料和反应温度对费托合成产物分布的影响     

RExOy.nH2O对氟离子的吸附性能

La、Ce等稀土水含氧化物对阴离子的吸附性早有研究「‘－‘1，但从混合轻稀土氯化物制得的水合氧化物吸附F一的研究报道较少．为探讨难溶金属水合氧化物的除氟性能，本文以混合轻稀土氯化物为原料，制得其水含氧化物（RExOy·nH。O），采用高聚物造粒，研究了粒状RExOy·nH。O对F一的吸附性能及吸附机理．所用混合轻稀土氯化物由包头钢铁稀土公司提供，其主要组成（以氧化物计）为：CeO。（50％）、Nd。O3（25％）、La。O。（15％）、P36Oll（8％）．聚丙烯睛分子量为（2．5～5）X10‘．其它试剂为分析纯．RExO．·nH。O参照文…     

Probe metal binding mode of imine covalent organic frameworks: cycloiridation for (photo)catalytic hydrogen evolution from formate

Metalation of covalent organic frameworks (COFs) is a critical strategy to functionalize COFs for advanced applications yet largely relies on the pre-installed specific metal docking sites in the network, such as porphyrin, salen, 2,2′-bipyridine, etc. We show in this study that the imine linkage of simple imine-based COFs, one of the most popular COFs, readily chelate transition metal (Ir in this work) via cyclometalation, which has not been explored before. The iridacycle decorated COF exhibited more than 10-fold efficiency enhancement in (photo)catalytic hydrogen evolution from aqueous formate solution than its molecular counterpart under mild conditions. This work will inspire more functional cyclometallated COFs to be explored beyond catalysis considering the large imine COF library and the rich metallacycle chemistry.

This study describes cyclometallation as a new metal binding mode for imine-based COFs. The iridacycle decorated COF could be used for catalytic hydrogen evolution from aqueous formate solution with high stability and high efficacy.     

Pt／钇稳定氧化锆固体电解质在高温下的电化学性质

用交流阻抗技术研究了二电极、三电极Ｐｔ／钇稳定氧化锆（简称ＹＳＺ）高温固体电化学体系．开路电位下，Ｐｔ／ＹＳＺ体系只有一个阻抗半圆，对应于电极体系的电化学活化控制过程，极化电阻随温度变化的表观活化能为１７１．５ｋＪ／ｍｏｌ．Ｐｔ／ＹＳＺ界面的双电层电容约为３００μＦ／ｃｍ２．阳极极化下，交流阻抗极化电阻显著减小；阴极极化下，极化电阻反而增大，并出现浓差控制现象．     

Enthalpy of Adsorption and Isotherms for Adsorption of Naphthenic Acid onto Clays

The enthalpies of adsorption and the isotherms for adsorption of naphthenic acid onto Na-montmorillonite, Na-kaolinite, and Na-illite were studied by means of calorimetry and the static method at 298.15 K. The results show that the enthalpies of adsorption and saturated adsorption amounts of naphthenic acid on different clays change in the order Na-montmorillonite > Na-illite > Na-kaolinite. The interaction between naphthenic acid and clays is discussed.     

Affinity Chromatography of Insulin with a Heptapeptide Ligand Selected from Phage Display Library

A heptapeptide phage display library was screened with insulin to find its ligands for affinity chromatography. The peptide was synthesized and coupled to EAH Sepharose 4B (5.4 mol mL^–1 bed). Then, insulin chromatography was carried out with mobile phases of different pH values and by the addition of urea and ethylene glycol. It was found that electrostatic interactions were predominant for the affinity binding, and hydrogen bonding might also contribute somewhat to the affinity. Finally, frontal analysis was performed and the dynamic binding capacity of the affinity column for insulin at 50% breakthrough was estimated at 60.6 mg mL^–1 bed, which was about two times higher than the theoretical binding capacity of the monomeric insulin. The result suggests that insulin was bound in dimer state in a stoichiometric relationship with the coupled peptide, indicating the high binding efficiency of the peptide ligand for insulin.     

Dendritic nanowire ultraviolet laser array

Self-organized dendritic crystal growth is explored to assemble uniform semiconductor nanowires into highly ordered one-dimensional microscale arrays that resemble comb structures. The individual ZnO nanowires have uniform diameters ranging from 10 to 300 nm. They are evenly spaced on a stem with a regular periodicity of 0.1-2 micrometer. Under optical excitation, each individual ZnO nanowire serves as a Fabry-Perot optical cavity, and together they form a highly ordered nanowire ultraviolet laser array.