毛细管离子分析法测定人发中钙和锌

适量人发试样经洗涤、冲洗,并于60℃干燥至恒重后称取1.000 g于600℃灰化后用盐酸(1+1)溶解残渣,溶液定容为100 mL供CIA分析。在10 mmol.L-1咪唑、10 mmol.L-1α-羟基乙酸、pH 4.0的电泳介质中,两离子在10 min内实现了分离。以间接紫外法检测(214 nm),外标法定量。钙(Ⅱ)及锌(Ⅱ)的峰面积与其质量浓度之间在0.5~40 mg.L-1范围内呈线性关系,相关系数分别为0.999 1和0.998 9,检出限(S/N=3)为0.1和0.2 mg.L-1,回收率在97.9%~102.5%之间,相对标准偏差小于2.5%。     

六钨酸四丁基铵盐和异丙醇体系的催化氧化反应的ESR研究Ⅰ.

本文研究了六钨酸四丁基铵盐在紫外光辐照的条件下催化氧化异丙醇为丙酮的反应。采用自旋捕捉技术与电子自旋共振相结合的方法,在位检测到氧化反应过程中有活泼自由基中间体产生,并观察到光电流产生。文中对六钨酸四丁基铵盐的催化反应机理进行了讨论。     

壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

苯丙氨酸改性树枝状聚赖氨酸的合成及表征

以双芴甲氧羰基赖氨酸(Di- Fmoc -Lysine)为支化单元采用固相多肽合成技术制备了一种树枝状聚赖氨酸.该聚合物表面活性氨基通过与芴甲氧羰基苯丙氨酸(Fmoc- Phe)反应获得表面完全替代的苯丙氨酸改性树枝状聚赖氨酸.产物的分子量和结构经MS和NMR进行了表征.研究结果表明,利用该方法得到的产物分子量单一,是一种潜在的理想非病毒治疗载体.     

Oxidation and Reduction Processes During NO x Removal with Corona-Induced Nonthermal Plasma

In this paper, the NO-to-NO ₂ conversion in various gaseous mixtures is experimentally investigated. Streamer coronas are produced with a dc-superimposed high-frequency ac power supply (10–60 kHz). According to NO _x removal experiments in N ₂ +NO _x and N ₂ +O ₂ +NO _x gaseous mixtures, it is supposed that the reverse reaction NO ₂ +ONO+O ₂ may not only limit NO ₂ production in N ₂ +NO _x mixtures, but also increase the energy cost for NO removal. Oxygen could significantly suppress reduction reactions and enhance oxidation processes. The reduction reactions, such as N+NON ₂ +O, induce negligible NO removal provided the O ₂ concentration is larger than 3.6%. With adding H ₂ O into the reactor, the produced NO ₂ per unit removed NO can be significantly reduced due to NO ₂ oxidation. NH ₃ injection could also significantly decrease the produced NO ₂ via NH and NH ₂ - related reduction reactions. Almost 100% of NO ₂ can be removed in gaseous mixtures of N ₂ +O ₂ +H ₂ O+NO ₂ with negligible NO production.     

聚砜-尼龙6嵌段共聚物结构的研究

<正> 以金属钠作催化剂合成的聚砜-尼龙6嵌段共聚物对尼龙6的吸水性有一定的改善,而且可以作为聚砜与尼龙共混物的相容剂,但共聚物中聚砜组分的含量都不超过25％。这可能与共聚物的结构有关。近年来的工作表明:反相气相色谱法(IGC)是高聚物结构分析的有用的工具之一。我们试图用反相气相色谱法,通过观察嵌段共聚物     

导电性聚呋喃的氧化合成及应用

总结了芳香族聚呋喃的氧化聚合方法,系统论述了聚合过程中影响聚呋喃性质的各种因素,推测了聚呋喃的链结构,介绍了聚呋喃的各种改进方法和效果。指出聚呋喃及其共聚物是一种电导率在10-11到10-1S.cm-1范围内有机半导体材料,其电聚合沉积膜具有奇特的电活性、优良的热加工性和特殊的表面形貌,可望在金属离子和有机物质的吸附与富集、传感探测等领域发挥作用。     

Conformations of fold part in isotactic polypropylene lamella with diamond lattice model

Ｉｎｔｈｅｆｉｅｌｄｏｆｐｏｌｙｍｅｒｐｈｙｓｉｃｓ,ｔｈｅｃｒｙｓｔａｌｌｉｎｅｓｔａｔｅｏｆｐｏｌｙｍｅｒｓｈａｓｌｏｎｇｂｅｅｎｏｆｉｎｔｅｒｅｓｔ.ＴｈｅｅｘｉｓｔｅｎｃｅｏｆｐｏｌｙｍｅｒｓｉｎｇｌｅｃｒｙｓｔａｌｗａｓｆｉｒｓｔｄｉｓｃｏｖｅｒｅｄｂｙＪａｃｃｏｄｉｎｅ[1]ｉｎ1955.Ｔｈｅｔｈｉｃｋｎｅｓｓｏｆｍｏｓｔｓｏｌｕｔｉｏｎｇｒｏｗｔｈｃｒｙｓｔａｌｓｉｓｆｏｕｎｄｔｏｂｅｏｆｔｈｅｏｒｄｅｒｏｆ～10ｎｍ.Ｔｈｉｓｏｂｓｅｒｖａｔｉｏｎｉｓｓｏｍｅｗｈａｔｓｕｒｐｒｉｓｉｎｇ.Ｓ…     

含铈类水滑石的制备及其衍生物催化研究

采用共沉淀水热法制备了镍铝铈三元复合层状氢氧化物.详细探讨了合成体系pH值、Ce/Al比及陈化条件对合成产物物相的影响;通过XRD,ICP,TG-DTA手段研究了合成物物相、组成及热行为.考察了以合成物为前驱体经焙烧后转化为镍铝铈复合金属氧化物在催化消除NO反应中的应用.实验结果表明,合成镍铝铈三元复合层状氢氧化物的适宜条件是:M2 /M3 =2,Ce/Al=0.07～0.75,pH=5.5～6.9,水热处理条件为110℃,5 h;在pH=5.5～6.9条件下,合成原料配比不同,产物物相相同,但组成不同;合成物热稳定性较差,在T=100～400℃之间,层间吸附水及层间平衡阴离子NO3-脱去,转化为复合氧化物,将此氧化物应用于NO消除反应中,表现出高的低温活性,400℃进行反应,NO转化率达95%,N2选择性几乎100%.