The adsorption and dissociation of O2 on Cu low-index surfaces

The extended LEPS of O(2)-Cu single crystal plane systems is constructed by means of 5-MP (the 5-parameter Morse potential). Both the adsorption and dissociation of O(2) on Cu low-index surfaces are investigated with extended LEPS in detail. All critical characteristics of the system that we obtain, such as adsorption geometry, binding energy, eigenvalues for vibration, etc., are in good agreement with the experimental results. Our calculated results suggest there are many differences between O(2)-Cu (110) and O(2)-Pd (110) systems. On a Cu (110) surface, O(2) adsorbs in a tilted configuration and there are two lowest energy dissociation channels along the [001] and [10] directions, respectively. We speculate that the adsorption geometry of O(2) on the metal surfaces relates to the lattice constant of metal. Meanwhile, We use the concepts of the molecular dissociation limit and the surface dissociation distance to analyze again the dissociation mechanism of the O(2) on the low-index surfaces.     

Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.     

Synthesis and characterization of new soluble poly（aryl ether nitrile）s containing phthalazinone moiety

A series of novel poly（aryl ether nitrile）s containing phthalazinone moiety were synthesized by the nucleophilic displacement reaction of bisphenol-like monomers （I） with 2,6-difluorobenzonitrile. The inherent viscosities ranged from 0.46 to 1.07 dL g^-1. The glass transition temperatures were in the range of 277-295℃, and the temperatures for 10% weight loss in nitrogen atmosphere were found between 495 and 527 ℃. The structures of these resultant polymers were confirmed by FT-IR and 1^H NMR. Moreover, the properties of poly（aryl ether nitrile）s including solubility and crystallinity were also studied.     

直流放电制备CN自由基及其LIF探测

CN自由基是研究化学反应动力学的典型自由基，CN的动力学行为，如CN＋O2的反应已成为研究自由基－自由基反应的模型体系[1]，同时也在许多实际过程如燃烧过程，星际气体的形成过程中起着重要的作用[2，3]．利用含有CN的化合物进行光解、放电、与亚稳态原子分子进行传能反应是目     

负载型非晶态Cu/SiO2催化剂的非晶性质

以超细ＳｉＯ２为载体，用ＫＢＨ４还原Ｃｕ＾２＋盐溶液制备了非负载型Ｃｕ和负载型Ｃｕ／ＳｉＯ２催化剂，ＸＲＤ，ＴＥＭ和电子衍射分析结果表明，负载型Ｃｕ／ＳｉＯ２为完全非晶态，而非负载型Ｃｕ中存在着少量晶态Ｃｕ，ＤＳＣ结果表明，非晶态Ｃｕ／ＳｉＯ２的热稳定性明显高于非负载型Ｃｕ，说明超细ＳｉＯ２具有稳定非晶结构的作用，ＸＰＳ结果表明，还原产物中的铜原子呈Ｃｕ状态，ＩＣＰ分析结果表明，样品中的Ｂ含量均低     

磁化作用对汽油动态挥发性影响的研究

用热重（TG）分析和自行设计的原位动态挥发实验，研究了在不同条件下汽油的挥发性，结果表明，磁化空气或磁化汽油都可提高汽油的挥发性，而汽油和空气共同磁化，可更大幅度地提高汽油的挥发性。     

Photochemical reactions of a dimethacrylate compound containing a chalcone moiety in the main chain

We synthesized the new photosensitive oligomer containing a chalcone moiety in the main chain by end-capping reaction of diepoxide compound with methacrylic acid. The chalcone-epoxy oligomeric compound was synthesized with 4,4^′-dihydroxychalcone and epichlorohydrin. Investigation of the photosensitivity of the newly synthesized chalcone oligomer was carried out by using UV-Vis absorption and infrared spectroscopies under UV exposure. We observed the photodimerization behavior under UV irradiation. At the same time, we could also observe the photopolymerization of the compound with a trace amount of dimethoxyphenyl acetophenone. Thermal properties of UV-cured dimethacrylate compounds were also studied.     

Cadinene Derivatives from Eupatorium adenophorum

A new norsesquiterpene named eupatorone (= (4S,4aR,6R)‐1‐acetyl‐6‐(acetyloxy)‐4,4a,5,6‐tetrahydro‐4,7‐dimethylnaphthalen‐2(3H)‐one; 1 ) and a new sesquiterpene derivative named 2‐deoxo‐2‐(acetyloxy)‐9‐oxoageraphorone (= (1R,4S,4aR,6R,8aS)‐6‐(acetyloxy)‐3,4,4a,5,6,8a‐hexahydro‐4,7‐dimethyl‐1‐(1‐methylethyl)naphthalen‐2(1H)‐one; 2 ), together with the five known cadinene derivatives 3 – 7 were isolated from the flower of Eupatorium adenophorum (Spreng. ). Their structures were established by extensive NMR experiments, including 1D and 2D NMR.     

Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.