Microwave-accelerated derivatization processes for the determination of phenolic acids by gas chromatography-mass spectrometry

A rapid method for the derivatization of phenolic antioxidants using microwave irradiation has been developed. Six antioxidatively active phenolic components of wines and fruits, namely gallic acid, gentisic acid, vanillic acid, caffeic acid, ferulic acid and p-coumaric acid were used in the model study. The solution of phenolic acids was evaporated to dryness on a rotary evaporator followed by further drying under microwave irradiation (600 W, 30 s). The resultant residue was dissolved in pyridene and treated with bis(trimethylsilyl)acetamide while irradiated by microwave using high power for 30 s. Controlled reaction was carried out employing bis(trimethylsilyl)trifluoroacetamide under conventional heating for 30 min. The trimethylsilyl derivatives were identified and quantified on a gas chromatography/mass selective detector. The mass spectral fragmentation patterns of the derivatives obtained by microwave irradiation were identical to those prepared by heating. The yields of microwave-assisted silylation were comparable to those from conventional heating. The rsd were less than 8% for six replicates. The linearity in wine matrix was nearly perfect. This method is a useful protocol to examine the phenolic constituents in wines and agricultural products.     

液芯光纤光度法在乙醇水溶液中测定铂(Ⅱ)、钛(Ⅳ)

采用氟塑料长光纤管，以４２％乙醇水溶液作液芯，组成液芯光纤，基于铂与氯化亚锡、钛与过氧化氢形成黄色络合物在乙醇水溶液中很稳定，拟定了测定铂、钛的液芯光纤光度法。该法灵敏度高，用 １ｍ长光纤作吸收池，铂的灵敏度为 ４． ８４５ Ａ／ｍｇ· Ｌ－１，钛的灵敏度为１．４１Ａ／ｍｇ· Ｌ－１（Ａ为吸光度），与常规法（１ｃｍ）比色皿相比灵敏度提高了 １００倍。该法测定了催化剂中铂，煤灰粉中钛，结果与推荐值相符。     

Investigation of radical cation in electrophilic fluorination by ESI-MS

Reaction solutions of selectfluor (1) with triphenylethylene (4a) and tetraphenylethylene (4b) were monitored by ESI-MS and ESI-MS/MS. Detection and characterization of the key radical cationic intermediates 5a.+ and 5b.+) fully supports the SET mechanism in electrophilic fluorination as depicted above. [reaction: see text]     

PPC/SBR并用弹性体的配方选择

利用正交法对丁苯橡胶（SBR）／聚丙撑碳酸酯（PPC）共混弹性体进行配方设计，得到了一个具有良好综合性能的配方。并通过方差分析得出PPC含量和马来酸酐（MA）用量是影响弹性体拉伸性能的最显著因素。     

Electrothermal volatilization of aluminum as 1-phenyl-3-methyl-4-benzoylpyrazolone[5] chelate for gaseous sample introduction in ICP-AES

Based on gaseous compound introduction as 1-phenyl-3-methyl-4-benzoylpyrazolone[5](PMBP) chelate of aluminum by electrothermal vaporization in ICP-AES, a method for determination of trace aluminum was developed. Trace aluminum was vaporized at temperature of 1000 degrees C, and the vaporization behavior of aluminum chelate was detailedly investigated. Under the optimum conditions, the detection limit of aluminum was 0.6 ng ml(-1), and the relative standard deviation for 0.1 mug ml(-1) aluminum was 4.7% (n=8). The proposed method was applied to the determination of trace aluminum in rice flour reference materials, and the results well agreed with the reference values.     

Synthesis, crystal structure and magnetic properties of a novel complex [Cu(NIT2Py)(PDA)(H2O)]·(CH3OH)(H2O)

A novel complex [Cu(NIT2Py)(PDA)(H₂O)]·(CH₃OH)(H₂O) has been synthesized and structurally characterized by X-ray diffraction methods. It crystallizes in the monoclinic space group P2(1)/c. The structure consists of [Cu(NIT2Py)(PDA)(H₂O)] moiety, one solvent methanol molecule and one water molecule. The copper(II) ion is in a distorted octahedral environment: one nitrogen atom and one oxygen atom from the NIT2Py, one nitrogen atom from the PDA (2,6-pyridine dicarboxylic acid) and one oxygen atom from the aqueous in the basal plane; two oxygen atoms from the PDA in the axial position. The units of [Cu(NIT2Py)(PDA)(H₂O)] were connected as one dimension chain by the intermolecular hydrogen bonds. The complex exhibits intramolecular antiferromagnetic interactions between the Cu(II) ion and the NIT2Py.     

Chemistry of O-Benzoquinones and Masked O-Benzoquinones I. Diels-Alder Reactions of O-Benzoquinones with Dimethyl Acetylenedicarboxylate and Phenylacetylene

Diels-Alder reactions of six o-benzoquinones with dimethyl acetylenedicarboxylate has been examined. The yields of adducts vary with the natures of the o-benzoquinones, 3,4-Di-n-propyl-(1c), 3,6-di-n-propyl (1d). 3. 4-diallyl-(1e) and 3, 6-diallyl-o-benzoquinone (1f) are found to give bicyclic a-diketones exclusively without the formation of 1,4-dioxine derivatives, the yields ranging from 20 to 70%. In the case of 4, 5-dimethoxy-o-benzoquinone, dimethyl 4, 5-dimethoxyphthalate is produced in 42% yield, presumably derived from the decomposition of the corresponding initially formed α-diketone. 3, 6-Di-n-propyl-4, 5-dimethoxy-o-benzoquinone deteriorates without addition to dimethyl acetylenedicarboxylate upon heating. The additions of o-benzoquinones 1c , 1d and 1f to phenylacetylene are also studied. The yields of adducts, α-diketones, range from 23% to 82%.     

From D-glucose to biologically potent L-hexose derivatives: synthesis of alpha-L-iduronidase fluorogenic detector and the disaccharide moieties of bleomycin A2 and heparan sulfate

A novel and convenient route for the synthesis of biologically potent and rare L-hexose derivatives from D-glucose is described. Conversion of diacetone-alpha-D-glucose (14) into 1,2:3,5-di-O-isopropylidene-beta-L-idofuranose (19) was efficiently carried out in two steps. Orthogonal isopropylidene rearrangement of compound 19 led to 1,2:5,6-di-O-isopropylidene-beta-L-idofuranose (27), which underwent regioselective epimerization at the C3 position to give the L-talo- and 3-functionalized L-idofuranosyl derivatives. Hydrolysis of compound 19 under acidic conditions furnished 1,6-anhydro-beta-L-idopyranose (35) in excellent yield, which was successfully transformed into the corresponding L-allo, L-altro, L-gulo, and L-ido derivatives via regioselective benzylation, benzoylation, triflation and nucleophilic substitution as the key steps. Applications of these 1,6-anhydro-beta-L-hexopyranoses as valuable building blocks to the syntheses of 4-methylcoumarin-7-yl-alpha-L-iduronic acid and the disaccharide moieties of bleomycin A(2) as well as heparan sulfate are highlighted.     

Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.