Pattern transfer and photoluminescence damage assessment of deep-submicrometer features etched by photon-induced cryoetching

We present a study of pattern-transfer and etch-induced damage in photon-induced cryoetching. Features with effective radii as small as 100 nm have been formed in both bulk and layered GaAs/AlGaAs materials. A measurement of the photoluminescence of etch-defined deep- submicrometer structures material suggests that this form of etching results in minimal process-induced damage. Modeling of the luminescence vs feature size for these features shows that the luminescence is limited only by carrier diffusion and non-radiative surface recombination.     

On the origin of the ferromagnetism in Zn0.8Mn0.2O having a higher Curie temperature than Zn0.8Co0.2O

Zn_0.8Co_0.2O and Zn_0.8Mn_0.2O films were deposited on substrates by a sol–gel technique. X-ray diffraction, field-emission scanning electron microscopy, photoluminescence, and ferromagnetism measurements were used to characterize these dilute magnetic semiconductors. It is shown that the ferromagnetic properties might be related to the formation of acceptor-like defects in the Zn_0.8Co_0.2O and Zn_0.8Mn_0.2O films. It is found that ferromagnetic Zn_0.8Mn_0.2O has a higher Curie temperature than Zn_0.8Co_0.2O. In addition, the higher ratio of grain-boundary area to grain volume of Zn_0.8Mn_0.2O than Zn_0.8Co_0.2O indicates that grain boundaries and related acceptors are the intrinsic origin for ferromagnetism.     

Application of Cryptand/Polystyrene Drift-Type Phase Transfer Catalysts for Reduction of Ketones

A drift-type phase transfer catalyst, cryptand-22, adsorbed on poly(styrene/diviny benzene)-sulfonic resin was prepared and applied to catalyze the reduction of ketones, e.g., acetophenone, benzophenone and benzaldehyde with NaBH₄ as a reducing agent. Before the reaction, cryptand-22 was adsorbed on the sulfonic resin with ion-pairing, resin-SO₃^{? +}NH-cryptand-22. The ion-pairs can be destroyed by adjusting the basicity of the reaction solution with NaOH and the cryptand can be released from the resin into the reaction solution as a homogeneous catalyst during the reaction period. After the reaction, the cryptand catalyst can be readsorbed on the resin by adjusting the acidity of the solution with HCl and can be readily recovered by filtration like a heterogeneous catalyst. The draft-type cryptand catalyst exhibited better catalytic ability than some common crown ethers, e.g., 15-crown-5, benzo-15-crown-5, 12-crown-4 and dibenzo-18-crown-6 for the reduction of acetophenone with NaBH₄. Effects of solvents, pH of solutions, concentration of the catalyst, reducing agents and resin property on the reduction of ketones were investigated and discussed. The reaction mechanism of the cryptand catalyzed reduction was also studied.     

A Rechargeable Hydrogen Battery Based on Ru Catalysis

Apart from energy generation, the storage and liberation of energy are among the major problems in establishing a sustainable energy supply chain. Herein we report the development of a rechargeable H₂ battery which is based on the principle of the Ru‐catalyzed hydrogenation of CO₂ to formic acid (charging process) and the Ru‐catalyzed decomposition of formic acid to CO₂ and H₂ (discharging process). Both processes are driven by the same catalyst at elevated temperature either under pressure (charging process) or pressure‐free conditions (discharging process). Up to five charging–discharging cycles were performed without decrease of storage capacity. The resulting CO₂/H₂ mixture is free of CO and can be employed directly in fuel‐cell technology.     

Determination of sunscreen agents in cosmetic products using microwave-assisted extraction and liquid chromatography

Microwave-assisted extraction (MAE), was used to extract sunscreen agents from cosmetic products. The extracts were analyzed by liquid chromatography (LC). The present method allows the determination of three sunscreen agents, Eusolex 2292, 4360 and 6300. The precision of the assay at 40 microg/ml of sunscreen agents ranged from 1.5 to 2.2%, and the detection limits were 2.0-4.0 ng/ml.     

Separation of crystal violet dyes and its application to pen ink analysis using CZE and MEKC methods

A crystal violet (CV) standard was irradiated under a Hg-Cd lamp for different exposure times to obtain various N-demethylation products. CZE effectively separated the photodegradation products based on molecular weight differences. In contrast, micellar EKC (MEKC), using SDS as the surfactant, was ineffective because the binding constants of the demethylation products and SDS were too close for separation. Nevertheless, MEKC analysis of ink has applications in forensic science because MEKC separated neutral components in the inks. Thus, MEKC can be used to obtain an ink "fingerprint" since each ink is unique depending on the location and time it was made. In contrast, CZE is useful for dating inks because CV is the primary ink dye and it photodegrades slowly.     

Polymer Coated Piezoelectric Quartz Crystal Protein Bio‐Sensors

A polymer coated piezoelectric crystal detection system with a home‐made computer interface for signal acquisition and data processing was prepared as a liquid chromatographic detector for various proteins. Various polymers, e.g., polyvinyl aldehhyde (polyacrolein) (PVA), polyacrylamide/glutaldehyde (PAA/GA) and bio‐gel A, were used as coating materials on quartz crystals for adsorption of various protein molecules, e.g., catalase (CA), hemoglobin (Hb), α‐chymotrypsin (Ch), albumin (Ab). The frequency responses of the polyacrlein coated piezoelectric detector for various proteins were in the order: catalase> hemoglobin> α‐chymotrypsin > albumin. In contrast, the order of the frequency responses of bio‐gel A and polyacrylamide/glutaldehyde coated piezoelectric crystals for these proteins were: hemoglobin> catalase > α‐chymotrypsin ≥ albumin and hemoglobin > albumin > catalase. The polyacrolein coated piezoelectric crystal protein detector exhibited a good linear frequency response with a high sensitivity of about 2.5×10³ Hz/(mg/mL) for catalase. In addition, bio‐gel A and polyacrylamide/glutaraldehyde coated crystals were sensitive to hemoglobin with sensitivities of about 4.5×10³ Hz/(mg/mL) and 3.0×10³ Hz/(mg/mL), respectively. Study of the interference of various organic molecules, e.g., alcohols, amines, ketones and carboxylic acids, in the detection of proteins with theses polymer coated crystals was also made. The polyacrolein coated crystal for proteins under went less interference from various organic molecules than bio‐gel A or polyacrylamide/glutaraldehyde coated crystals. Effects of coating load, concentration of proteins and flow rate of liquid chromatographic eluent were also investigated and discussed.     

Phase‐separated,conducting composites from polyaniline and benzobisthiazole rigid‐rod polymer

As an alternative method for processing polyaniline (PANI) from its conducting (protonated) state, vacuum casting of PANI from a methanesulfonic acid (MSA) solution provided films with electrical conductivity values of about 130–150 S/cm. In addition, we similarly prepared blended films of PANI · MSA and poly(p‐phenylene benzobisthiazole) (PBZT). This process eliminated the need for a subsequent protonation step and had the additional advantage that the conjugated PBZT may provide alternative conducting pathways. Conductivity values of the composite films ranged from 100 pS/cm to 124 S/cm, and the films displayed critical concentration behavior with a PANI threshold concentration of 2.75% and a critical exponent of 4. Transmission electron micrographs displayed phase‐separated regions with PANI forming a continuous network at high concentrations. Thermogravimetric analysis results demonstrated the thermal and thermooxidative stability advantage of the blends due to the PBZT component. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2539–2548, 2001     

Ferromagnetism study of Co<Subscript>0.2</Subscript>Mg<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Zn<Subscript>0.8−<Emphasis Type="Italic">x</Emphasis></Subscript>O films prepared by the sol–gel method

Co_0.2Mg _x Zn_0.8−x O films prepared with different molar ratio of magnesium acetate to zinc acetate were deposited on substrates by the sol–gel technique. X-ray diffraction, photoluminescence (PL) and ferromagnetism measurements were used to characterize the Co_0.2Mg _x Zn_0.8−x O diluted magnetic semiconductors. The acceptor-like defects were determined in the PL band and the intensity of the acceptor-related PL increased with increasing Mg concentration. Therefore, an increase in the number of the acceptor-like defects (zinc vacancies especially) in the Co_0.2Mg _x Zn_0.8−x O film may lead to the enhancement of the magnetic properties. It is worth noting that changes in Mg concentration and the number of the acceptor-like defects are important issues for producing strong ferromagnetism Co_0.2Mg _x Zn_0.8−x O films prepared by the sol–gel method.     

Determination of glucose and ethanol after enzymatic hydrolysis and fermentation of biomass using Raman spectroscopy

Raman spectroscopy has been used for the quantitative determination of the conversion efficiency at each step in the production of ethanol from biomass. The method requires little sample preparation; therefore, it is suitable for screening large numbers of biomass samples and reaction conditions in a complex sample matrix. Dilute acid or ammonia-pretreated corn stover was used as a model biomass for these studies. Ammonia pretreatment was suitable for subsequent measurements with Raman spectroscopy, but dilute acid-pretreated corn stover generated a large background signal that surpassed the Raman signal. The background signal is attributed to lignin, which remains in the plant tissue after dilute acid pretreatment. A commercial enzyme mixture was used for the enzymatic hydrolysis of corn stover, and glucose levels were measured with a dispersive 785 nm Raman spectrometer. The glucose detection limit in hydrolysis liquor by Raman spectroscopy was 8 g L⁻¹. The mean hydrolysis efficiency for three replicate measurements obtained with Raman spectroscopy (86 ± 4%) was compared to the result obtained using an enzymatic reaction with UV-vis spectrophotometry detection (78 ± 8%). The results indicate good accuracy, as determined using a Student's t-test, and better precision for the Raman spectroscopy measurement relative to the enzymatic detection assay. The detection of glucose in hydrolysis broth by Raman spectroscopy showed no spectral interference, provided the sample was filtered to remove insoluble cellulose prior to analysis. The hydrolysate was further subjected to fermentation to yield ethanol. The detection limit for ethanol in fermentation broth by Raman spectroscopy was found to be 6 g L⁻¹. Comparison of the fermentation efficiencies measured by Raman spectroscopy (80 ± 10%) and gas chromatrography-mass spectrometry (87 ± 9%) were statistically the same. The work demonstrates the utility of Raman spectroscopy for screening the entire conversion process to generate lignocellulosic ethanol.