Tween 20-stabilized gold nanoparticles combined with adenosine triphosphate-BODIPY conjugates for the fluorescence detection of adenosine with more than 1000-fold selectivity

This study describes the development of a simple, enzyme-free, label-free, sensitive, and selective system for detecting adenosine based on the use of Tween 20-stabilized gold nanoparticles (Tween 20-AuNPs) as an efficient fluorescence quencher for boron dipyrromethene-conjugated adenosine 5′-triphosphate (BODIPY-ATP) and as a recognition element for adenosine. BODIPY-ATP can interact with Tween 20-AuNPs through the coordination between the adenine group of BODIPY-ATP and Au atoms on the NP surface, thereby causing the fluorescence quenching of BODIPY-ATP through the nanometal surface energy transfer (NSET) effect. When adenosine attaches to the NP surface, the attached adenosine exhibits additional electrostatic attraction to BODIPY-ATP. As a result, the presence of adenosine enhances the efficiency of AuNPs in fluorescence quenching of BODIPY-ATP. The AuNP-induced fluorescence quenching of BODIPY-ATP progressively increased with an increase in the concentration of adenosine; the detection limit at a signal-to-noise ratio of 3 for adenosine was determined to be 60 nM. The selectivity of the proposed system was more than 1000-fold for adenosine over any adenosine analogs and other nucleotides. The proposed system combined with a phenylboronic acid-containing column was successfully applied to the determination of adenosine in urine.     

ZnO‐Coated Carbon Nanotubes: Inter‐Diffusion of Carboxyl Groups and Enhanced Photocurrent Generation

ZnO is a defect‐governed oxide and emits light at both visible and UV regimes. This work employs atomic layer deposition to produce oxide particles on oxygenated carbon nanotubes, and the composites only show emission profiles at short wavelengths. The quenching of defect‐related emissions at long wavelengths is verified, owing to carboxyl diffusion into oxygen vacancies, and doping is supported by ZnCO₃ formation in oxide lattice. Fully coated tubes display an increased photocurrent and the quantum efficiency increases by 22 % relative to the bare nanotubes.     

Aryne‐Induced Novel Tandem 1,2‐Addition/(3+2) Cycloaddition to Generate Imidazolidines and Pyrrolidines

A new “single‐flask” method was developed for the synthesis of imidazolidines and pyrrolidines with high stereoselectivity. First, a Schiff base was arylated with an aryne. Second, an intramolecular proton transfer took place from the methylene position to the anionic aryne ring. Third, the resultant ylide reacted with a second equivalent of the same Schiff base in situ or an electron‐deficient alkene through a (3+2) cycloaddition. These sequential tandem 1,2‐addition/(3+2) cycloaddition reactions led to the desired heterocycles in 63–88 % yields.     

Organocatalyzed Asymmetric Conjugate Addition of Heteroaryl and Aryl Trifluoroborates: a Synthetic Strategy for Discoipyrrole D

Bis‐heteroaryl or bis‐aryl stereocenters were formed by an organocatalytic enantioselective conjugate addition using the respective trifluoroborate salts as nucleophiles. Control studies suggested that fluoride dissociation is necessary in the anhydrous conditions. This strategy is applicable to the synthesis of discoipyrrole D, an inhibitor of BR5 fibroblast migration.     

Preparation and Application of Cholesteryl‐Benzo‐15‐Crown‐5/Cholesteryl Mixed Liquid Crystals

Various mixed liquid crystals containing crown ether‐cholesteryl liquid crystal, benzo‐15‐crown‐5‐COO‐C₂₇H₄₅ (B15C5‐COOCh), with various common cholesteric liquid crystals, e.g., cholesteryl chloride, cholesteryl benzoate and cholesteryl palmitate, were prepared and studied using polarizing microscopy and differential scanning calorimetry. Investigating the concentration effect of B15C5‐COOCh in mixed liquid crystals revealed that the addition of B15C5‐COOCh resulted in wider phase transition temperature ranges of these cholesteryl liquid crystals. The stability of these B15C5‐COOCh/cholesteryl mixed liquid crystals was studied using comprehensive graphic molecular modeling computer programs (Insight II and Discover) to calculate their molecular energy and stability energy. The effect of salts, e.g. Na⁺, Co³⁺, Y³⁺ and La³⁺, on the transition temperature range of the mixed liquid crystals was also investigated. The crown ether cholesteric liquid crystal B15C5‐COOCh was applied both as a surfactant and an ion transport carrier to transport metal ions through liquid membranes. Cholesteryl benzo‐15‐crown‐5 exhibited distinctive characteristics of a surfactant and the critical micellar concentration (CMC) of the surfactant was investigated by the pyrene fluorescence probe method. Cholesteryl benzo‐15‐crown‐5 was successfully applied as a good ion transport carrier (Ionophore) to transport various metal ions, e.g. Li⁺, Na⁺, La³⁺, Fe³⁺ and Co³⁺, through organic liquid membranes. The transport ability of the cholesteryl benzo‐15‐crown‐5 surfactant for these metal ions was in the order: Co³⁺ ≥ Li⁺ > Fe³⁺ > Na⁺ > La³⁺.     

Biofouling-resistance expanded poly(tetrafluoroethylene) membrane with a hydrogel-like layer of surface-immobilized poly(ethylene glycol) methacrylate for human plasma protein repulsions

In general, it is a challenge to control the highly polar material grafting from the chemically inert Teflon-based membrane surface. This work describes the surface modification and characterization of expanded poly(tetrafluoroethylene) (ePTFE) membranes grafted with poly(ethylene glycol) methacrylate (PEGMA) macromonomer via surface-activated plasma treatment and thermally induced graft copolymerization. The chemical composition and microstructure of the surface-modified ePTFE membranes were characterized by Fourier transform infrared spectroscopy (FT-IR), contact angle, and bio-atomic force microscopy (bio-AFM) measurements. Biofouling property of the modified membranes was evaluated by the measurements of the plasma protein (γ-globulin, fibrinogen, or albumin) adsorption determined using an enzyme-linked immunosorbent assay (ELISA). In general, the hydrophilicity of the surface of ePTFE membranes increases with increasing the grafting degree of the copolymerized PEGMA. The highly hydrated PEGMA chain on the resulting ePTFE membranes was found to form a surface hydrogel-like layer with regulated coverage in aqueous state, which can be controlled by the content of PEGMA macromonomer in the reaction solution. The relative protein adsorption was effectively reduced with increasing capacity of the hydration for the PEGMA chain grafted on the ePTFE membrane surface. From both results of protein adsorption and platelet adhesion test in vitro, it is concluded that the PEGMA-grafted hydrophilic ePTFE membranes could provide good biofouling resistance to substantially reduce plasma protein and blood platelet fouling on the membrane surface in human body temperature.     

Isothermal assembly of DNA origami structures using denaturing agents

DNA origami is one of the most promising recent developments in DNA self-assembly. It allows for the construction of arbitrary nanoscale patterns and objects by folding a long viral scaffold strand using a large number of short "staple" strands. Assembly is usually accomplished by thermal annealing of the DNA molecules in buffer solution. We here demonstrate that both 2D and 3D origami structures can be assembled isothermally by annealing the DNA strands in denaturing buffer, followed by a controlled reduction of denaturant concentration. This opens up origami assembly for the integration of temperature-sensitive components.     

DNA‐Templated Copper Nanoprobes: Overview,Feature, Application,and Current Development in Detection Technologies

Metal nanoprobes have recently attracted board research interestinr their application in establishing sensing systems due to their unique optical, electrical, physical, and chemical properties. In comparison to gold and silver nanoprobes, analytical platform based on copper nanoprobes (Cu‐NPs) is still in the early stages of development. In this review, we focus on single‐stranded, and double‐stranded DNA capped Cu‐NPs sensing systems which have been designed for various analytes, including metal ions, anions, small molecules, biomolecules (DNA, RNA, and protein, etc.). In addition, the application of Cu‐NPs in biological labeling or bio‐imaging platforms has also been introduced and summarized.     

Cascade One‐Pot Synthesis of Orange‐Red‐Fluorescent Polycyclic Cinnolino[2,3‐f]phenanthridin‐9‐ium Salts by Palladium(II)‐Catalyzed C−H Bond Activation of 2‐Azobiaryl Compounds and Alkenes

Quaternary ammonium salts were synthesized in moderate to good yields through double oxidative C?H bond activation on azobenzenes. The mechanism of the highly regioselective reaction of 2‐azobiaryls with alkenes to give orange‐red‐fluorescent cinnolino[2,3‐f]phenanthridin‐9‐ium salts and 15H‐cinnolino[2,3‐f]phenanthridin‐9‐ium‐10‐ide is proposed to involve ortho C?H olefination of the 2‐azobiaryl compound with the alkene, intramolecular aza‐Michael addition, concerted metalation–deprotonation (CMD), reductive elimination, and oxidation.     

Single nucleotide polymorphism detection in the hMSH2 gene using conformation-sensitive CE

CE allows for highly reproducible analysis of DNA fragments which can be used to detect DNA mutations including SNPs. We have utilized a simple and direct CE analysis method for SNP analysis called conformation-sensitive CE (CSCE), based on the principle of single nucleotide different to produce conformational changes in the mildly denaturing solvent system. This method was applied to analysis of a mutation in the promoter region of the hMSH2 gene. This gene belongs to the human DNA mismatch repair system, which is responsible for recognizing and repairing mispaired nucleotides, and mutations in the hMSH2 gene are known to cause hereditary nonpolyposis colorectal cancer (HNPCC). PCR fragments generated from the promoter region of the hMSH2 gene, displaying either a C/C homozygote, C/T heterozygote, or T/T homozygote genotype, did not require further pretreatment before electrokinetic injection. The CE separation, using a 1xTris-borate-EDTA (TBE) buffer containing 3% w/v hydroxylethyl cellulose (HEC) and 6 M urea, was performed under reverse polarity with a separation temperature of 15 degrees C. The genotypes of 204 healthy volunteers and 13 colorectal cancer patients were determined using CSCE, and the results confirmed by DNA sequencing. While the CSCE separations were shown to be highly reproducible and sensitive for screening large populations, no correlation was observed between cancer patients and this hMSH2 gene polymorphism.