Ion-exchange separation of proteins by polyallylamine-grafted cellulose gel

A cellulose-based anion exchanger bearing water-soluble polycation was tested for separation of proteins. The exchanger was obtained by partial oxidation of cellulose gel by aq. NaIO4 followed by Schiff base formation with polyallylamine (PAA, molecular mass 5000). The retention behavior of proteins for three grades of PAA-cellulose gels, with amino group contents of 0.35, 0.59 and 0.96 mmol/g cellulose, was examined at several pH values and compared with that for conventional DEAE-cellulose gel with amino group content of 1.07 mmol/g cellulose. The retention of proteins by PAA-cellulose gels was remarkably greater than that for the DEAE-cellulose gel. Pairs of proteins having close isoelectric points and molecular masses (human and bovine serum albumins; beta-lactoglobulin A and B) could be separated by the PAA-cellulose gel columns. Such efficiency can be ascribed to high local density of grafted polyallylamine, in contrast to the random and sparse charge distribution in DEAE-cellulose.     

First-principles energy band calculation for undoped and S-doped TiO2 with anatase structure

The electronic structure of S-doped TiO₂ with an optimized anatase structure was calculated within the framework of the density functional theory (DFT). For the calculation we built four kinds of supercells; type-A and B supercells consist of 12 and 48 atoms and a centered Ti atom is substituted for an S atom, while type-C and D supercells consist of 12 and 48 atoms and a centered O atom is substituted for an S atom. The supercells (type-B and D) were employed to adjust the S-concentration in TiO₂ to an experimental value of a few %. The changes of the lattice parameters are not significant in the type-A and B supercells. The phase transition from the tetragonal to the orthorhombic occurs in the type-C and D supercells. In the small supercell (type-A), S-related states are located in the range of −1.6 to 0 eV, and the S-states are band-like. In contrast, in the large supercell (type-B), S-related states appeared at about 0.9 eV above the top of the valence band, and the S-states are atomic-like. The localization of the S-related states is remarkable in the type-B supercell. In the type-D supercell, the S-related states were merged with the top of the valence band, and as a result the band-gap energy is narrowed by 0.7 eV. Despite a low S-concentration (3%) in the type-D supercell, the S-related states are somewhat band-like.     

Conversion from arenes having a benzene ring to those having a picolinic acid by simple growing cell reactions using Escherichia coli that expressed the six bacterial genes involved in biphenyl catabolism

The comprehensive bioconversion of aromatic compounds with a benzene ring to a picolinic acid was achieved with a recombinant Escherichia coli strain that expressed the six genes involved in biphenyl catabolism, these being the bphA1(2072)A2A3A4 genes encoding the evolved biphenyl dioxygenase, the bphB gene encoding dihydrodiol dehydrogenase, and the bphC gene encoding catechol 2,3-dioxygenase.     

Improved calculation of band gap of Sr2Bi2O5 crystal using modified Becke–Johnson exchange potential

The electronic structure of Sr₂Bi₂O₅ is calculated by the scalar-relativistic full potential linearized augmented plane wave (FLAPW+lo) method using the modified Becke–Johnson potential combined with the local density approximation correlation (MBJ–LDA). Both the valence band maximum (VBM) and conduction band minimum (CBM) exist at the Γ-point, indicating that Sr₂Bi₂O₅ is a direct-band-gap material. The band gap is calculated to be 3.17 eV, which is very close to the experimental value. This result is in great contrast to the underestimation based on the GGA calculation. On the other hand, there is only a small difference in the effective masses of holes and electrons photogenerated near the VBM and CBM for the MBJ–LDA and GGA approaches. The optical properties of Sr₂Bi₂O₅ are calculated from the complex dielectric function ε(ω)=ε₁(ω)+iε₂(ω). A highly polarized peak is observed at 3.5 eV in the ε₂(ω) function. Furthermore, the absorption coefficient estimated from the MBJ–LDA is very similar to that from the experimental result.     

Reentrant nematic phase in 4-alkyl-4′-cyanobiphenyl (nCB) binary mixtures

The appearance of reentrant nematic phase was identified in nCB/8CB (n = 1–6) binary mixtures using differential scanning calorimetry, small-angle X-ray diffraction and polarising microscopy with photomonitor. Phase diagrams can roughly be unified if plotted against the average number of alkyl chain length. Distinction was recognised for the phase boundaries between nematic and smectic A phases of even and odd n of the minor component nCB. The character of 8CB as ‘SmA former’ is briefly discussed.     

High-efficiency electro-optic amplitude modulation with delayed coherent addition

Amplitude modulation of laser light is required for resonant sideband extraction employed in gravitational-wave detectors. Amplitude modulation with electro-optic phase modulators is realized by interferometric phase-to-amplitude conversion. Although two outputs modulated at opposite phases to each other are obtained, usually only one of them is utilized and the other is abandoned. The reuse of this abandoned light improves the power efficiency of the modulation. This can be realized by inverting the modulation phase of one output with a delay line and adding it to the other coherently. Moreover, this system selects a high-efficiency operating point and modulates the light in a linear range. We demonstrate that the modulation system can be operated with a power loss that is due only to the losses of the optical components.     

Challenge of advanced low temperature fuel cells based on high degree of freedom of group 4 and 5 metal oxides

To obtain an ideal electrocatalysts for hydrogen fuel cells, we investigated group 4 and 5 oxide-based compounds because of their high degree of freedom. First-principles calculations revealed that oxide surfaces such as those of titanium oxide could break down the universal scaling to achieve the ideal state of the oxygen reduction reaction. We experimentally clarified that the active sites were oxygen vacancies for tantalum and zirconium oxides, in addition to doped foreign elements and crystalline structures for titanium oxide. We successfully demonstrated that precious metal-free and carbon-free oxide-based cathodes have high quality active sites and superior durability in 0.1 M sulfuric acid at 80°C. Our strategy was developed as follows: (1) Active sites are created on the oxide surface by modifying the crystalline structure and electronic states and (2) electrons participating in the oxygen reduction reaction are supplied by nanosized oxide particles and oxide films through the tunneling effect of electrons.     

A Palladium‐Nanoparticle and Silicon‐Nanowire‐Array Hybrid: A Platform for Catalytic Heterogeneous Reactions

We report the development of a silicon nanowire array‐stabilized palladium nanoparticle catalyst, SiNA‐Pd. Its use in the palladium‐catalyzed Mizoroki‐Heck reaction, the hydrogenation of an alkene, the hydrogenolysis of nitrobenzene, the hydrosilylation of an α,β‐unsaturated ketone, and the C‐H bond functionalization reactions of thiophenes and indoles achieved a quantitative production with high reusability. The catalytic activity reached several hundred‐mol ppb of palladium, reaching a TON of 2 000 000.