Cellulose gel and aerogel from LiCl/DMSO solution

Recently-discovered lignocellulosic solvent, 8%(w/w) lithium chloride/dimethyl sulfoxide (LiCl/DMSO), was found to dissolve cellulose of varied crystal forms and degree of polymerization. Cellulose samples could be activated for dissolution by complexation with ethylenediamine (EDA), giving EDA contents of 20–23% (w/w) in the complex irrespective of the cellulose type. The cellulose solution gave well-resolved ¹³C NMR spectrum, confirming molecular dispersion. Cellulose could be coagulated by ethanol to give translucent cellulose gels, which could be converted to highly porous aerogels via solvent exchange drying. Nitrogen adsorption analysis gave their specific surface areas of 190–213 m²/g, with typical mesopore sizes of 10–60 nm. Scanning electron microscopy revealed the network structure of aerogel composed of relatively straight fibril segments, approx. 20 nm wide and 100–1,000 nm long. X-ray diffraction showed that the material is poorly crystalline cellulose II.     

Preparing a magnetically responsive single-wall carbon nanohorn colloid by anchoring magnetite nanoparticles

A single-wall carbon nanohorn (SWNH) colloid was made to be magnetically responsive by anchoring magnetite nanoparticles prepared by the homogeneous mixing of FeCl(2)-FeCl(3) and NaOH solutions. Transmission electron microscopy observation showed the high dispersion of magnetite particles of 2-9 nm on the surface of the SWNH colloid, coinciding with the broad X-ray diffraction peaks of the magnetites. The magnetization measurements showed that the magnetite nanoparticles-anchored SWNH (mag-SWNH) colloid has the hybrid property of ferrimagnetism and superparamagnetism. It was demonstrated that mag-SWNH colloid dispersed in water by sonication responded to an external magnetic field, gathering toward a magnet. N(2) adsorption experiments showed the high nanoporosity of mag-SWNHs and that magnetite nanoparticles were preferably anchored at "nanowindow" sites and the entrance sites of interstitial pores. This magnetically responsive SWNH colloid should contribute to the field of drug delivery.     

Efficient H2 adsorption by nanopores of high-purity double-walled carbon nanotubes

DWNT buckypaper adsorbed much more hydrogen than did a SWNT bundle. XRD measurements and GCMC simulation results suggested that the DWNT bundle is loosely packed into an hexagonal array with interstitial pores which can efficiently adsorb H2 molecules.     

Molecular interactions between estrogen receptor and its ligand studied by the ab initio fragment molecular orbital method

The ab initio fragment molecular orbital calculations were performed for molecular interactions of the whole estrogen receptor (ER) ligand-binding domain with a natural ligand, 17beta-estradiol (EST). The interaction energies of the ligand at the residue level were calculated using HF and MP2 methods with several basis sets. The charge-transfer (CT) interactions were also analyzed based on configuration analysis for fragment interaction. Strong electrostatic interactions were observed between the EST and surrounding charged/polarized residues, Glu353, Arg394, His524, and Thr347. Weak electrostatic and significant van der Waals dispersion interactions were observed between the EST and the many surrounding hydrophobic residues. Together with the experimental interpretations, both interactions equally contributed to the total binding energies, and it was found that the inclusion of electron correlation was essential to obtain an appropriate picture of the interaction. The strongest interaction energy was observed between Glu353 and the EST, and the CT interactions from the lone-pair orbital of the carbonyl oxygen of Glu353 to the sigma(OmicronEta) orbital of the hydroxyl group of EST were found to be important. The CT interactions from the lone-pair orbital of EST to the sigma(NuEta) of Arg394 and from the lone-pair orbital of EST to the sigma(NuEta) of His524 were also observed. These CT interactions occurred through the hydrogen-bond networks between the ER and EST. Therefore, electron donations from the ER to the EST and electron back-donations from EST to the ER were characteristic of ER-ligand binding. Our approach provides a powerful tool to understanding detailed molecular interactions at the quantum mechanical level.     

Efficient fabrication and enhanced photocatalytic activities of 3D-ordered films of titania hollow spheres

Facile and effective approaches were developed to fabricate 3D-ordered films of titania hollow spheres with different sphere diameters. The shell thickness of the sphere was adjusted in the range of 20-40 nm by changing the casting cycle of the titania precursor. The photonic stop band was observed for the 3D-ordered film and was tunable by the sphere diameter and the shell thickness. The stop band shifted from 930 to 547 nm. Crystal violet dye adsorbed on the film exhibited more than two times higher absorbance than that on a reference film of a flat titania layer, probably due to the red edge effect of the stop band and/or to the multiple scattering effect. The enhanced absorbance led to more efficient photodegradation of the dye under visible light and under solar light irradiation. A maximum photocatalytic enhancement of 22% is achieved. Finally, the influence of TiO2 morphology on photocatalytic activity was discussed. Compared with flat titania films, the existence of ordered macropores in titania spheres causes the stop band and a longer optical path due to multiple scattering. Both the red edge of the stop band and multiple scattering effects enhance the absorption of the dye, which results in the photocatalytic enhancement.     

Eco-friendly synthesis and antibacterial activity of silver nanoparticles reduced by nano-wood materials

Hydrothermal treatment of nano-structured wood, prepared by precision grinding, with cationic silver was found to give silver nanoparticles (Ag NPs) of 2–40-nm size range embedded in the wood tissue. The size and distribution of Ag NPs depended strongly on the starting silver ion concentration and reaction temperature. Higher temperature tended to give larger size and wider distribution. The obtained Ag NPs were characterized using various methods, including high-resolution transmission electron microscopy, UV–visible spectroscopy, and X-ray diffraction. The antibacterial effect of the product against Escherichia coli was evaluated by static and dynamic culture experiments, revealing that the Ag NPs-loaded nano-wood materials have great promise as antimicrobial agents against E. coli.     

Bond ionicities of high-Tc oxides

A semiempirical method for the calculation of the bond ionicity, which is applicable even to extremely anisotropic systems such as copper-oxide superconductors, is proposed as a generalization of the Phillips-Van Vechten-Levine scheme. The value of the ionicity calculated for oxides generally tends to increase as the crystal strain becomes more tensile. It is characteristic of cuprate superconductors that the values of the ionicity are high compared with other 3d transition-metal oxides. Also significant are the extremely high ionicities in the direction normal to the CuO₂ planes and the relatively high covalencies of the intraplanar bonds. These crystal-chemical characteristics may be intimately related to the remarkable insulator-to-metal transition and the associated high-T_c superconductivity in the layered copper-oxide systems.     

Determination of ricin by nano liquid chromatography/mass spectrometry after extraction using lactose-immobilized monolithic silica spin column

Ricin is a glycosylated proteinous toxin that is registered as toxic substance by Chemical Weapons convention. Current detection methods can result in false negatives and/or positives, and their criteria are not based on the identification of the protein amino acid sequences. In this study, lactose-immobilized monolithic silica extraction followed by tryptic digestion and liquid chromatography/mass spectrometry (LC/MS) was developed as a method for rapid and accurate determination of ricin. Lactose, which was immobilized on monolithic silica, was used as a capture ligand for ricin extraction from the sample solution, and the silica was supported in a disk-packed spin column. Recovery of ricin was more than 40%. After extraction, the extract was digested with trypsin and analyzed by LC/MS. The accurate masses of molecular ions and MS/MS spectra of the separated peptide peaks were measured by Fourier transform-MS and linear iontrap-MS, respectively. Six peptides, which were derived from the ricin A-(m/z 537.8, 448.8 and 586.8) and B-chains (m/z 701.3, 647.8 and 616.8), were chosen as marker peptides for the identification of ricin. Among these marker peptides, two peptides were ricin-specific. This method was applied to the determination of ricin from crude samples. The monolithic silica extraction removed most contaminant peaks from the total ion chromatogram of the sample, and the six marker peptides were clearly detected by LC/MS. It takes about 5 h for detection and identification of more than 8 ng/ml of ricin through the whole handling, and this procedure will be able to deal with the terrorism using chemical weapon.     

Size separation and size determination of liposomes

We developed a method for separating liposomes by size and determining their average diameters. Liposomes with different average diameters were separated on a monolithic silica capillary column, and the size of the liposomes corresponding to each peak was determined online with a dynamic light scattering detector coupled to the capillary liquid chromatography system. The calculated diameters for the separated liposomes were similar to the diameter values measured in batch mode. We demonstrate that this combination of a monolithic capillary column and light scattering detection could be used for size separation of liposomes and could provide more details about average diameters than batch-mode analysis.