Compressible bag model and dibaryon stars

We propose dibaryon stars on the base of the compressible bag model, in which a hadron bag responds microscopic thermal pressure of the other bags and the volume exclusion effect is considered. In general, a free bosonic point-particle matter has no pressure at zero temperature, but a condensed bosonic bag matter is able to have a finite pressure because of both the compressibility and the volume exclusion effects. We will show that the condensed dibaryon matter not only produce a very soft equation of state but can also bring the 1.44M mass star.     

Global existence for one-dimensional motion of non-isentropic viscous fluids

We study the p-system with viscosity given by v_t ? u_x = 0, u_t + p(v)_x = (k(v)u_x)_x + f(∫ vdx, t), with the initial and the boundary conditions (v(x, 0), u(x,0)) = (v₀, u₀(x)), u(0,t) = u(X,t) = 0. To describe the motion of the fluid more realistically, many equations of state, namely the function p(v) have been proposed. In this paper, we adopt Planck's equation, which is defined only for v > b(> 0) and not a monotonic function of v, and prove the global existence of the smooth solution. The essential point of the proof is to obtain the bound of v of the form b < h(T) ? v(x, t) ? H(T) < ∞ for some constants h(T) and H(T).     

Flow-injection photometric determination of manganese(II) based on its catalysis of the periodate oxidation of N,N'-bis(2-hydroxy-3-sulfopropyl)tolidine

A novel flow-injection spectrophotometric method has been developed for the determination of manganese(II) at sub-nanogram/ml levels. The method is based on its catalytic effect on the oxidation of N,N′-bis(2-hydroxy-3-sulfopropyl)tolidine (HSPT) by periodate. The catalytic effect of manganese(II) was enhanced by the presence of 2,2′-bipyridine as an activator. By monitoring the change in absorbance of the oxidation product of HSPT at 670 nm, manganese(II) ranging 0.02-3.0 ng ml⁻¹ could be determined with the relative standard deviations of less than 2%. The interfering ions were effectively suppressed by the addition of 2,2′-iminodiethanol and citric acid. The proposed method is directly applicable to the determination of manganese in lake and river water samples.     

Radiation-initiated emulsion copolymerization of styrene and carboxylic acid monomers

The emulsion Copolymerization of styrene and carboxylic acid monomers such as acrylic, methacrylic, and itaconic acids (AAc, MAAc, IAc) was studied by using ⁶⁰Co γ-rays as initiator and sodium do-decylsulfate as emulsifier. The polymerization behavior of these acid monomers was followed by simultaneous conductometric and potentiometric titrations for a latex sample taken in polymerization. The polymerization rate of these acid monomers increases in the following order of hydrophobicity: IAc < AAc < MAAc; this suggests that their polymerization sites are mainly the surface and/or subsurface regions of latex particles. The copolymerization rate of styrene and acid monomer increases with an increase in the acid monomer content for AAc and MAAc, whereas for IAc the rate decreases. The particle sizes determined by the stopped-flow method reveal that this variation of copolymerization rate cannot be explained by the number of growing particles and should be attributed to another factor; for instance, the transfer rate of styrene molecules from oil droplets to growing particles.     

Chemical stability of La1−xSrxCrO3 in oxidizing atmospheres

The single-phase region of La_1−xSr_xCrO₃ (x=0.1, 0.2, 0.3) was precisely determined as a function of temperature, P_O2 and Sr content. The powders with the nominal composition of La_1−xSr_xCrO₃ were equilibrated under various conditions, and then identified by XRD analyses. To confirm the equilibration, two independent experiments were performed for each composition observing (i) the precipitation of the second phase from a single-phase solid solution, and (ii) the formation of the single phase from the constituent oxides. Two kinds of second phases, SrCrO₄ and an unknown phase, were observed depending on the conditions. The second phases tended to appear at low temperature, in high P_O2 and with a large Sr content. The single-phase regions obtained via the two equilibration routes were in good agreement with each other. The thermodynamic calculations on the supposition of ideality of the solid solution essentially reproduced the experimental results. When this material is used as the interconnects of solid oxide fuel cells, much attention should be paid to its relatively narrow solubility range of Sr; for example, the solubility limit is approximately 0.1 under a typical cathode-side condition (1273 K, air).     

A new synthesis of imidazo[1,2-a]pyridine and imidazo[2,1-a]isoquinoline derivatives

A new synthesis of imidazo[1,2-a]pyridine and imidazo[2,1-a]isoquinoline derivatives 4 and 8 , respectively by 1,5-dipolar cyclization reactions of stabilized pyridinium N-ylides 3a-e or isoquinolinium N-ylide 7 is described. The starting N-ylides 3a-e and 7 are prepared by the reaction of the corresponding pyridinium salts 1a-e or isoquinolinium salts 6 with N-bis(methylthio)methylene-p-toluenesulfonamide (2) .     

Compression behavior of Langmuir-Blodgett monolayers of regioselectively substituted cellulose ethers with long alkyl side chains

Regioselectively substituted alkylcellulose ethers having long alkyl side chains, 6-O- (6C18), 2,3-di-O- (23C18), and tri-O-octadecyl-cellulose (triC18) were successfully synthesized. The key step of these syntheses was removal of the residual alkylation reagent by an isothermal crystallization procedure to isolate and purify the compounds, since a physical entanglement between the long alkyl side chains in the cellulose derivatives and the reagent had caused difficulty in obtaining the purified derivatives. After the monolayers from these cellulose ethers were fabricated on a water surface, they were deposited on substrates by a vertical dipping method to be Langmuir-Blodgett (LB) monolayers. During the compression process of each monolayer, a surface pressure (pi)-area (A) isotherm behaved in a different way. Atomic force microscopy (AFM) was employed to interpret changes of the surface topography of the obtained LB monolayers depending on the surface pressure. The compressed 23C18 LB monolayer was observed to be more homogeneous than other samples. On the basis of the LB monolayer thickness estimated by AFM as well as X-ray reflection measurements, the 23C18 LB monolayer was assumed to possibly possess the vertical arrangement of an up-ordering of all the alkyl side chains on the individual glucose ring against the water surface. In other words, with increase in the surface pressure, the usual conformation of a 2(1) screw of cellulose backbone may be changed into an unusual conformation with a certain phi-psi dihedral angle resulting in 1-fold axis without a symmetry element. These results suggest that the formation of such compressed LB monolayers was strongly influenced by the hydrophobic interaction among the distribution of the long alkyl side chains in the anhydroglucose unit and further lack of inter- and/or intramolecular hydrogen bonds engaged in cellulose ethers, and as a result, those effects may even change the main chain conformation.     

Oxidizing intermediates from the sterically hindered iron salen complexes related to the oxygen activation by nonheme iron enzymes

Oxidizing intermediates are generated from nonheme iron(III) complexes to investigate the electronic structure and the reactivity, in comparison with the oxoiron(IV) porphyrin pi-cation radical (compound I) as a heme enzyme model. Sterically hindered iron salen complexes, bearing a fifth ligand Cl (1), OH(2) (2), OEt (3), and OH (4), are oxidized both electrochemically and chemically. Stepwise one-electron oxidation of 1 and 2 generates iron(III)-mono- and diphenoxyl radicals, as revealed by detailed spectroscopic investigations, including UV-vis, EPR, M?ssbauer, resonance Raman, and ESIMS spectroscopies. In contrast to the oxoiron(IV) formation from the hydroxoiron(III) porphyrin upon one-electron oxidation, the hydroxo complex 4 does not generate oxoiron(IV) species. Reaction of 2 with mCPBA also results in the formation of the iron(III)-phenoxyl radical. One-electron oxidation of 3 leads to oxidative degradation of the fifth EtO ligand to liberate acetaldehyde even at 203 K. The iron(III)-phenoxyl radical shows high reactivity for alcoxide on iron(III) but exhibits virtually no reactivity for alcohols including even benzyl alcohol without a base to remove an alcohol proton. This study explains unique properties of mononuclear nonheme enzymes with Tyr residues and also the poor epoxidation activity of Fe salen compared to Mn and Cr salen compounds.     

Fragment interaction analysis based on local MP2

We have developed a fragment interaction analysis based on local MP2 (FILM) in the context of the fragment molecular orbital (FMO) scheme. The primary purpose of this work is to provide a tool for analyzing inter-fragment interaction associated with dispersion interactions in a large molecule such as protein and DNA. Our implementation of local MP2 (LMP2) is based on the algorithm developed by Pulay and Werner. A potential of FILM was demonstrated using the human immunodeficiency virus type 1 protease (HIV-1 PR) complexed with lopinavir (LPV). The total energy, binding affinity, and inter-fragment interaction energy (IFIE) by the FMO method using LMP2 were compared with those obtained by canonical MP2 and the site-specific information in dispersion interaction was obtained. It turned out that the FILM is a useful tool for analyzing the dispersion interaction between an amino acid residue and a specific site of a ligand.     

Iron hemiporphycene as a functional prosthetic group for myoglobin

The iron complex of hemiporphycene, a molecular hybrid of porphyrin with porphycene, was incorporated into the apomyoglobin pocket to examine ligand binding ability of the iron atom in the novel porphyrinoid. Apomyoglobin was successfully coupled with a stoichiometric amount of ferric hemiporphycene to afford the reconstituted myoglobin equipped with the iron coordination structure of native protein. Cyanide, imidazole, and fluoride coordinated to the ferric protein with affinities comparable with those for native myoglobin. The ferrous myoglobin was functionally active to bind O(2) and CO reversibly at pH 7.4 and 20 degrees C. The O(2) affinity is 12-fold higher than that of native myoglobin while the CO affinity is slightly lower, suggesting decreased discrimination between O(2) and CO in the heme pocket. The functional anomaly was interpreted to reflect increased sigma-bonding character in the Fe(II)-O(2) bond. In contrast with 6-coordinate native NO protein, the NO myoglobin containing ferrous hemiporphycene is in a mixed 5- and 6-coordinate state. This observation suggests that the in-plane configuration of the iron atom in hemiporphycene is destabilized by NO. Influence of the core deformation was also detected with both the infrared absorption for the ferrous CO derivative and electron paramagnetic resonance for ferric imidazole complex. Anomalies in the ferric and ferrous derivatives were ascribed to the modified iron-N(pyrrole) interactions in the asymmetric metallo core of hemiporphycene.