Effect of Initial Cell Concentration on Ethanol Production by Flocculent Saccharomyces cerevisiae with Xylose-Fermenting Ability

Different initial cell concentrations of a recombinant flocculent Saccharomyces cerevisiae MA-R4 were evaluated for their effects on xylose fermentation and glucose–xylose cofermentation. A high initial cell concentration greatly increased both the substrate utilization and ethanol production rates. During xylose fermentation, the highest rates of xylose consumption (2.58 g/L h) and ethanol production (0.83 g/L h) were obtained at an initial cell concentration of 13.1 g/L. During cofermentation, the highest rates of glucose consumption (14.4 g/L h), xylose consumption (2.79 g/L h), and ethanol production (6.68 g/L h) were obtained at an initial cell concentration of 12.7 g/L. However, a high initial cell density had no positive effect on the maximum ethanol concentration and ethanol yield mainly due to the increased amount of by-products including xylitol. The ethanol yield remained almost constant (0.34 g/g) throughout xylose fermentation (initial cell concentration range, 1.81–13.1 g/L), while it was slightly lower at high initial cell concentrations (9.87 and 12.7 g/L) during cofermentation. The determination of the appropriate initial cell concentration is necessary for the improvement of substrate utilization and ethanol yield.     

Synthesis of β‐Methoxyacrylate Natural Products Based on Box‐PdII‐Catalyzed Intermolecular Methoxycarbonylation of Alkynoles

Bis(oxazoline)‐palladium(II) catalyzed carbonylation of homopropargyl alcohols afforded acyclic methoxyacrylate 2 and 6‐membered lactone 3a , 3b , 3d , 3e , 3f , 3g , 3h , 3i , 3j , 3k in good combined yield. In the case of propargyl alcohols, 5‐membered lactones 3p , 3q , 16 were obtained in moderate yields. The one‐pot synthesis of kawa lactones 3a , 3r , 3s and formal synthesis of dihydroxycystothiazole A and dihydroxycystothiazole C are presented. To elucidate the stereochemistry of (+)‐annularin G and (?)‐annularin H, the first asymmetric syntheses of these natural products were achieved.     

Potent 2,2-diphenyl-1-picrylhydrazyl radical-scavenging activity of novel antioxidants, double-stranded tyrosine residues conjugating pyrocatechol

New potent antioxidants conjugating the catechol (=pyrocatechol; pyrCat) group to two N-termini of modified double-stranded tyrosine residues were synthesized and showed radical scavenging activity with 2,2-diphenyl-1-picrylhydrazyl radical (DPPH radical, DPPH˙) as a free radical model, second-order rate constants for the DPPH˙ scavenging reaction, and the results from electron spin resonance (ESR) studies. It was found that the tyrosine (Tyr) residue and pyrCat containing new antioxidants developed in the study have about 3-20 times more potent antioxidative activity than Trolox, pyrCat, and L-ascorbic acid (VC). In order to elucidate the relationship between antioxidant activity and the molecular orbital states, and to design potent antioxidants we present an interesting approach using an absolute hardness (η)-absolute electronegativity (χ) diagram based on chemical hardness. It was shown that quantum chemicals were required to develop potent antioxidants.     

Effective synthesis of diiodinated picene and dibenzo[a,h]anthracene by AuCl-catalyzed double cyclization

6,13-Diiododibenzo[a,h]anthracene and 5,8-diiodopicene were synthesized by AuCl-catalyzed double cyclization. The highly selective reaction yielded a new class of peri-halogenated fused aromatics.     

New asymmetric vanadium catalyst for highly selective oxidative coupling polymerization

Novel oxovanadium(IV)–bisoxazoline catalysts, such as vanadyl sulfate (VOSO₄)–(R)‐2,2′‐isopropylidenebis(4‐phenyl‐2‐oxazoline) [(R)Phbox], for the asymmetric oxidative coupling polymerization (AOCP) of 2,3‐dihydroxynaphthalene were developed. For example, the AOCP with VOSO₄–(R)Phbox in CH₂Cl₂–MeOH [7/1 (v/v)] at room temperature for 24 h under an O₂ atmosphere, followed by acetylation of the hydroxyl groups, afforded a polymer in a 58% yield with a specific rotation of [α]_D = ?147. The enantioselectivity during the polymerization was estimated to be 80% enantiomeric excess (S), a value much higher than that observed for the polymerizations with the copper(I)‐based catalyst systems and the typical oxovanadium(IV) catalysts reported for the asymmetric oxidative coupling producing the 1,1′‐bi‐2‐naphthol derivatives. © 2005 Wiley Periodicals, Inc., Inc. J Polym Sci Part A: Polym Chem 43: 5872–5878, 2005     

Formation of 10-30 nm SiO2/Si structure with a uniform thickness at ∼120 °C by nitric acid oxidation method

Silicon dioxide (SiO₂) layers with a thickness more than 10 nm can be formed at ∼120 °C by direct Si oxidation with nitric acid (HNO₃). Si is initially immersed in 40 wt.% HNO₃ at the boiling temperature of 108 °C, which forms a ∼1 nm SiO₂ layer, and the immersion is continued after reaching the azeotropic point (i.e., 68 wt.% HNO₃ at 121 °C), resulting in an increase in the SiO₂ thickness. The nitric acid oxidation rates are the same for (1 1 1) and (1 0 0) orientations, and n-type and p-type Si wafers. The oxidation rate is constant at least up to 15 nm SiO₂ thickness (i.e., 1.5 nm/h for single crystalline Si and 3.4 nm/h for polycrystalline Si (poly-Si)), indicating that the interfacial reaction is the rate-determining step. SiO₂ layers with a uniform thickness are formed even on a rough surface of poly-Si thin film.     

Discrimination Between 8‐Oxo‐2′‐Deoxyguanosine and 2′‐Deoxyguanosine in DNA by the Single Nucleotide Primer Extension Reaction with Adap Triphosphate

The adenosine derivative of 2‐oxo‐1,3‐diazaphenoxazine (Adap) exhibits a superb ability to recognize and form base pairs with 8‐oxo‐2′‐deoxyguanosine (8‐oxo‐dG) in duplex DNA. In this study, the triphosphate of Adap (dAdapTP) was synthesized and tested for single nucleotide incorporation into primer strands using the Klenow Fragment. The efficiency of dAdapTP incorporation into 8‐oxo‐dG‐containing templates was more than 36‐fold higher than with dG‐containing templates, and provides better discrimination than does the incorporation of natural 2′‐deoxyadenosine triphosphate (dATP). The selective incorporation of dAdapTP into 8‐oxo‐dG templates was therefore applied to the detection of 8‐oxo‐dG in human telomeric DNA sequences extracted from H₂O₂‐treated HeLa cells. The enzymatic incorporation of dAdapTP into 8‐oxo‐dG‐containing templates may provide a novel basis for sequencing oxidative DNA damage in the genome.     

Effect of Acid Treatment of Montmorillonite on “Support‐Activator” Performance to Support Metallocene for Propylene Polymerization Catalyst

This work is focused on montmorillonite (MMT)‐based “support‐activators” (S‐As) for the metallocene‐catalyzed propylene polymerization. This catalyst was previously industrialized; however, for further technological advances, the activation mechanism is investigated. The chemical and morphological requirements of the S‐A are surveyed using both commercially available raw clay minerals (non‐acid‐treated) and acid‐treated clay minerals. The S‐A possessing strong‐acid sites (pK a < ?8.2) gives a highly active catalyst. Acid treatment of MMT induces morphological changes as well as the formation of strong acid sites. Based on pore size distribution analysis and atomic force microscopy observations, it is concluded that the strong acid sites are located in the small pores around the edge of the clay mineral (not in the interlayer), where the structure is disordered by the acid treatment.