Improvement of least-squares finite difference method on simulating slider air bearings in head disk systems

Least-squares finite difference (LSFD) method, one of mesh-free methods, is used to solve slider air bearings problem through discritizing the generalized Reynolds equation into nonlinear systems of algebraic equations. Two approximation schemes for the linearization of these equations are presented and compared. And, some new techniques to search supporting points for the reference node in the mesh-free method were proposed and explored. Therefore, these improvements eliminate some potential limitation of the LSFD method previously published and further facilitate its employment in complex slider models. Advanced step slider as an example of negative pressure sliders is simulated and verified using the improved LSFD mesh-free method in head disk systems.     

X-ray evidence for the absence of 90°-domains in polycrystalline PbTiO3 thin films with grains below a critical size

3 thin films is systematically studied by using X-ray diffraction (XRD). The PbTiO₃ thin films with different average grain sizes were prepared on various substrates by a sol-gel process. The films on NaCl and fused glass are randomly grain-oriented, while those on (111)Pt/Ti/SiO₂/Si are highly {100} cubic index grain-oriented . It is found from the XRD patterns of the films on NaCl that with decreasing average grain size from 230 to 80 nm, the intensities of high h index (h>l) peaks (hkl), such as (100), (110), (200), (201), (210), (211), etc., decrease rapidly and ultimately disappear, whereas another set of peaks (lkh), including (001), (002), (102), (112), etc., are still intense. This interesting result suggests that at grain size below a certain critical size an increasing number of grains no longer show 90°-domains, which is confirmed by TEM observations. Meanwhile, X-ray evidence of such a grain-size-related absence of 90°-domains is also found for PbTiO₃ films on Pt(111) and fused-glass substrates. The volume fractions of single-domain grains (without 90°-domains) in the films are estimated from their XRD patterns. By combining SEM and TEM investigations, the critical grain size for the formation of 90°-domains is further determined to be near 200 nm. Received: 19 December 1996/Accepted: 24 March 1997     

AUTOMATED WIND TUNNEL MEASUREMENTS

It is common practice in power transmission to use bundled overhead electrical conductors because the lower rate of corona discharge, compared with single conductors, makes the bundle attractive for high voltages. However, secondary problems may arise from the vibrations induced by the aerodynamic forces which act on the leeward conductors as a result of their immersion in the wake of a windward conductor. Thus, in addition to possible aeolian and galloping oscillations observed for a single conductor, bundle conductors may also be subjected to wake-induced oscillations. ^1,2 Although extensive research has been done on the aeroelastic behavior of single and bundled conductors which are bare, little is known about the galloping or wake oscillation characteristics of given bundle conductors which, depending upon the environmental conditions during the formation of ice, may have five or so representative shaped cross-sections. One important task involves the aerodynamic quasi-static force and moment measurements in a wind tunnel using full scale conductor cross-sections each of which must be rotated through many angles at different spacings. Such measurements are repetitive as well as tediously time consuming and, hence, are beneficially automated. A reliable, accurate and inexpensive automated apparatus is described in this paper which permits the aerodynamic measurements to be performed efficiently and without intervention. Most importantly, it relieves the operator of the usual responsibility for manually controlling the separation and orientation of the sections as well as the need to manually compensate fluctuations in the free stream air speed. For simplicity, the apparatus is detailed in the context of a twin bundle conductor.     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

Two- and three-dimensional analysis of bose-einstein correlations inπ +/K+p interactions at 250 GeV/c

The NA22 data onπ ^? π ^? correlations are analyzed in terms of a number of two- and three-dimensional parametrizations (Gaussian space-time, Goldhaber, Bowler string-like, Bertsch hydrodynamical, Kopylov-Podgoretskii, etc.). Contrary to the results obtained for e⁺e^? andµp collisions, the Goldhaber parametrization, as well as string-like models, fail in describing the hadron-hadron data. Better fits are obtained in the framework of surface-emitting fireball-like models, both when including and excluding hydrodynamical expansion of nuclear matter. Our results indicate that pion radiation occurs at earlier stages of matter evolution than in nuclear collisions.     

Oblique impingement of a circular jet in a cross flow

The distributions of temperature and dye concentration produced by a cross flow jet impinging on a flat surface are examined experimentally. Measurements show that for sufficiently high jet injection speeds, a ground vortex region upstream of the jet develops. The dimensionless gross geometrical features of this recirculating region are related by a simple linear law and are independent of the jet — surface spacing or the injection speed ratio.     

Coaxial Discharge and Transverse Magnetic Field

The study deals with the effect of an applied transverse magnetic field on the dynamics and parameters of the focused and expanded plasma in a coaxial discharge. The experimental results were found with a 3 kJ Plasma focus device of a Mather geometry. The discharge takes place in hydrogen gas with base pressure of 0.5 Torr. The experiments are conducted with a 10 kV bank voltage, which corresponds to 100 kA peak discharge current with rise time 8 μs. Helmholtz magnetic coils are placed outside the expansions chamber to produce a transverse magnetic field with intensity 280 G perpendicular to the plasma expanded from the coaxial electrodes. The investigations have shown that the plasma flow along the expansion chamber axis is restricted when applying the externally transverse magnetic field and the maximum axial velocity of the expanded plasma is decreased by 33%. X-ray probe has been used to measure the focused plasma electron temperature (T_e). The experimental results and the calculations showed that T_e is decreased from 2.2 keV to 800 eV with the application of a transverse magnetic field. The expanded plasma electron temperature and density have been measured by an electric double probe, the results cleared that the expanded plasma electron temperature is decreased by 2.6 times while its density is increased by 9 times, when a transverse magnetic field is applied.     

A method for investigating the orientational behaviour of fibrous particles in gaseous flow

A method is described by which the angular orientation distribution of fibrous particles carried in a gaseous stream may be investigated. The method is based upon the interpretation of the spatial intensity distribution or scattering profile of laser light scattered by individual fibres. The scattering instrument used to capture the profiles is described, and the mathematical computation required to ascertain the orientation of each particle at the measurement point is detailed. Illustrative results are given for a study of airborne micromachined silicon particles of 12 μm length and 1.0 μm by 1.5 μm cross-section. The method is currently being employed by the authors to investigate ways of improving the orientation control over nonspherical particles in systems such as aerodynamic particle sizers and particle shape classifiers, since lack of particle orientation control is known to adversely affect the measurement accuracy of both these types of instrument.