THE ROLE OF DIOXYGEN SPECIES IN THE BASE- AND COBALT-CATALYZED OXYGENATION OF HINDERED PHENOLS

Abstract— The mechanisms by which 4-substituted 2,6-di- t -butylphenols are oxygenated by base- and Co(II) Schiff base complex-catalysis into o - or p -peroxyquinols and their Co(III) complexes, respectively, have been investigated. For the base-catalyzed oxygenation, a one-step ionic mechanism involving no radical species is suggested to be the most probable one. For the formation of the peroxycobalt(III) complexes, the following stoichiometry is concluded: ArOH + Co(II) + 5/4 O₂→ peroxycobalt(III) complex + 1/2 H₂O. A mechanism involving an electron transfer between the phenols and the Co(II)-O₂ complex followed by further electron transfer between the formed phenoxy radicals and the Co(II) complex to give the corresponding phenolate anions is proposed.     

Kinetic study of the γ radiolysis of polyethylene

A kinetic study was made of the formation of hydrogen and trans-vinylene unsaturation in the radiolysis of polyethylene induced by γ rays with a dose rate of 6.35 × 10⁵ rad/hr at 30–100°C in vacuo. The rates of the formation of hydrogen and trans-vinylene unsaturation were described by the zero-order formation kinetics with respect to each concentration combined with the first-order disappearance. The apparent rate constant for the formation of hydrogen increased gradually with rising irradiation temperature to give the activation energy of 0.6 kcal/mole. On the other hand, those for the disappearance of hydrogen and the formation and disappearance of trans-vinylene unsaturation were almost independent of temperature. The G values for crosslinking and main-chain scission were obtained from the gel data by using the Charlesby-Pinner equation, and the activation energy of 1.5 kcal/mole was given for both of them. On the basis of these results the reactions induced by γ rays in solid polyethylene were discussed.     

An investigation on a broad infrared band with the maximum at approximately 1300 cm(-1) in magnesia cement,phase 3

In magnesia cement, phase 3, a broad and strong infrared band was observed with the maximum at approximately 1300 and 1050 cm(-1) in the H and D systems, respectively. To clarify the origin of the 1300 cm(-1) band the temperature dependency of the infrared spectra of the H system was observed and the spectra analyzed on the basis of a strong vibrational coupling of the OH stretching with lattice modes. The fitting was quite well, giving rise to the origin of the 1300 cm(-1) band of the OH stretching.     

Synthesis of optically active (+)-19-nortestosterone by asymmetric bis-annulation reaction

Michael reaction of 1,7-pctadien-3-one with 2-methylcyclopentane-1,3-dione, followed by intramolecular aldol condensation promoted by L-amino acids produced the optically active (+)-4-(3-butenyl)-7a-methyl-5,6,7,7a-tetrahydroindane-1,5-dione in high chemical and optical yields. The PdCl₂-catalyzed oxidation of the terminal double bond gave the methyl ketone, which had 76% optical purity and was made 100% optically pure by recrystallization. Then aldol condensation afforded the tricyclic ketone, which was alkylated with 3-butenyl iodide to afford (?)-3β-t-butoxy-2,3,3a,4,5,7,8,9,9aβ,9bα-decahydro-6-(3-butenyl)-3aβ-methyl-1H-benz[e]inden-7-one. The synthesis of this compound means the total synthesis of (+)-19-nortestosterone.     

Synthesis and characterization of polystyrene‐b‐poly (1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups

Polystyrene‐b‐poly(1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups were synthesized by the esterification of azobenzene acid chloride with polystyrene‐b‐hydroxylated poly(1,2‐isoprene‐ran‐3,4‐isopenre) block copolymers for creating new photochromic materials. The resulting block copolymers with azobenzene side groups were characterized for structural, thermal, and morphological properties. IR and NMR spectroscopies confirmed that the polymers obtained had the expected structures. Differential scanning calorimetric measurements by heating runs clearly showed the glass transitions of polystyrene and polyisoprene main chains and two distinct first‐order transitions at temperatures of azobenzene side groups around 48 and 83 °C. The microstructure of these block copolymer films was investigated using both transmission electron microscopy (TEM) and near‐field optical microscopy (NOM). TEM images revealed typical microphase‐separated morphologies such as sphere, cylinder, and lamellar structures. The domain spacing of microphase‐separated cylindrical morphology in the NOM image agreed with that of the TEM results. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2406–2414, 2002     

X-ray scattering by water molecules studied by using synchrotron radiation

The energy spectra of free water molecules were measured at scattering angles 2θ ranging from 10.5° to 75.7°, using an angle-dispersive-type diffractometer and synchrotron radiation as an X-ray source. A silicon (111) monochrometer was used to obtain incident X-rays with the wavelengths of (1.543/n) Å (n = 1,3,4,5). Observed inelastic scattering peaks are clearly separated from eleastic ones at s values [s = (4π/λ) sin Å] larger than 8 Å^?1. The increase of the separation with an increasing s value was consistent with the classical theory of the Compton shift. The total (elastic plus inelastic) intensities were obtained over a range of s = 0.74–5.0 Å^?1. Experimental difference intensities Δσ_ee and Δσ_ne were obtained separately by combining the X-ray and high-energy electron scattering data. The experimental results are in reasonable agreement with the theoretical intensities calculated from SCF and CI molecular wave functions with a basis set of double-zeta plus polarization functions. © 1994 John Wiley & Sons, Inc.     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Optical microscopy and in situ Raman scattering of single crystalline ethylene hydrate and binary methane-ethylene hydrate at high pressures

Visual observations through a microscope and in situ Raman measurements have been made for single crystalline ethylene hydrate (EH) and binary methane-ethylene hydrate (MEH) at pressures up to 3.7 GPa and room temperature. Both hydrates showed pressure-induced phase transitions at 1.6, 2.0, and 3.0 GPa for EH and at 1.7, 2.1, and 3.3 GPa for MEH. The cubic sI phase of EH and MEH remains stable up to 1.6 and 1.7 GPa, respectively, which are more widely ranging values than the values for the methane hydrate sI phase. In this sI phase of binary MEH, the cage occupancies by methane and ethylene molecules are investigated from Raman spectra. Above P = 3.0 GPa for EH and 3.3 GPa for MEH, they decomposed by associating with the formation of the polyethylene.     

Synthesis of N3-substituted uridine and related pyrimidine nucleosides and their antinociceptive effects in mice

Seventy eight N(3)-substituted derivatives of uridine (1), thymidine (2), 2'-deoxyuridine (3), 6-azauridine (4), 2',3'-O-isopropylideneuridine (5), and arabinofuranosyluracil (6) were synthesized and their antinociceptive effects were evaluated. N(3)-(2',4'-Dimethoxyphenacyl)uridine (1l), N(3)-(2',4'-dimethoxyphenacyl)2'-deoxyuridine (3l), and N(3)-(2',5'-dimethoxyphenacyl)arabinofuranosyluracil (6m) possessed 93, 86, and 82% of the antinociceptive effects tested by hot plate, respectively. The antinociceptive effects of three derivatives were 5.8, 5.4, and 5.1-folds of the effect of N(3)-phenacyluridine (1h) (16%), respectively. The structure-activity relationship of N(3)-substituted pyrimidine nucleosides was also discussed.     

Synthesis of monohalocyclopropane derivatives from olefins by the reaction with trihalomethanes and copper

Fluoro-, chloro-, bromo-, and iodocyclopropane derivatives were obtained in 10–80% yields by the reaction of FCHI₂, ClCHI₂, BrCHI₂, and CHI₃, respectively, with Cu in the presence of olefins. The reaction was electrophilic, and proceeded stereospecifically, i.e., cis and trans olefins afforded cyclopropane derivatives whose configurations with respect to the substituents from original olefins were cis and trans, respectively. Since isomeric olefins were not detected in the reaction mixture which would be expected from the insertion of the corresponding free monohalocarbenes into C—H bonds, the reaction seemed to proceed via organocopper intermediates rather than free monohalocarbenes. With respect to the configuration of the halogen introduced by the new reaction, the cis or endo isomers were generally obtained predominantly over the corresponding trans or exo isomers.