Synthesis, structure and optical properties of Eu/TiO2 nanocrystals at room temperature

The nanocrystal samples of titanium dioxide doped with europium ion (Eu³⁺/TiO₂ nanocrystal) are synthesized by the sol-gel method with hydrothermal treatment. The Eu³⁺ contents (molar ratio) in the samples are 0, 0.5%, 1%, 2%, 3% and 4%. The X-ray diffraction, UV-Vis spectroscopy data and scanning electron microscope image show that crystallite size is reduced by the doping of Eu³⁺ into TiO₂. Comparing the Raman spectra of TiO₂ with Eu³⁺/TiO₂ (molar ratio Eu³⁺/TiO₂=1%, 2% and 4%) nanocrystals at different annealing temperatures indicates that the anatase-to-rutile phase transformation temperatures of Eu³⁺/TiO₂ nanocrystals are higher than that of TiO₂. This is due to the formation of Eu-O-Ti bonds on the surface of the TiO₂ crystallite, as characterized by the X-ray photoelectron spectroscopy. The photoluminescence spectra of TiO₂ in Eu³⁺/TiO₂ nanocrystals are interpreted by the surface self-trapped and defect-trapped exciton relaxation. The photoluminescence of Eu³⁺ in Eu³⁺/TiO₂ nanocrystals has the strongest emission intensity at 2% of Eu³⁺ concentration.     

More precise determination of thermal lens focal length for end-pumped solid-state lasers

A method of more precise determination of the focal length of equivalent thermal lens (TL) is presented in this paper. The method is based on the diffraction theory of aberrations. By numerically calculating the optical path difference (OPD) distribution and the Strehl ratio, the focal lengths for “top-hat” pumping and Gaussian pumping are obtained and the equations for the focal lengths are presented by curve fitting. Also the equations for average pump radii are presented. The experiment on a fiber-coupled LD pumped Nd:YAG laser is carried out. The experimental results verify the validity of the method.     

点式单波束多普勒测流系统的设计方法

为了加快多普勒流速计算速度和提高系统稳定性,提出基于FPGA技术的多普勒测速的设计方法,其中包括信号发射电路和信号接收电路。首先通过M码进行二相相移键控信号的调制,减少了回波误差、增加信号发射能量,有效地降低了水中超声波的能量耗散对信号提取的影响。然后对回波信号进行二相解调,并利用复自相关算法进行分析处理。最后,通过测速实验对所提方法进行验证。实验结果表明,所提方法不仅具有较低的实验误差而且具有较高的可靠性。     

宽带可调谐掺Yb3+双包层光纤激光器的研究

利用闪耀光栅构成可调谐Littrow外腔,对掺Yb³⁺双包层光纤激光器的波长调谐输出进行了实验研究.激光调谐输出波长范围70nm.针对光纤内的双折射效应对激光的输出功率的影响,实验中使用了在线光纤偏振控制器,从而有效地减小了调谐曲线的起伏及其与荧光谱的差别,并得到了窄线宽、线偏振、宽带调谐的激光输出.     

20GHz注入锁模光纤激光器实验

稳定、波长可调谐的窄脉冲光源是未来光时分复用/波分复用光纤通信系统的重要组成部分。报道了一个20GHz的注入锁模光纤激光器的实验。利用一个10GHz的导体体激光器作为光源，最终得到了波长可调谐的重复频率为20GHz、脉冲宽度为12.4ps的光脉冲，波长的调谐范围为16nm。     

一种新型可调谐锁模光纤激光器

利用法布里-珀罗腔的激光二极管作为调制器件，实现环形腔光纤激光器的主动锁模。并利用法布里-珀罗腔的激光二极管的多纵模特性，把激光二极管当作一梳状滤波器，通过偏振控制器来调整入射到激光二极管内光的偏振态，同时均衡腔内增益，得到波长大范围可调谐的锁模激光，其脉冲宽度约为48ps，脉冲重复速率2GHz。     

产生特殊聚焦图形的二元光学元件

通过面积编码将伽博（Gabor)波带片的透过率函数的余弦分布等效为二元分布，研制了能产生各种特殊聚焦图形的二元光学元件。根据透镜聚焦的物理原理制作的二元振幅型波带片可以方便地产生多种聚焦线，给出了相应的实验结果，并讨论了改善聚焦效果的优化条件。     

Constructive interference via collision—aided radiative excitation

We have studied theoretically constructive interference via collision-aided radiative excitation in an open four-level system using a density matrix approach. The four-level system consists of a Λ-type three-level quantum-beat configuration driven by one laser field and a fourth level coupled by a vacuum mode. It is shown that through the incoherent process (collision), coherence between widely-separated doublets and subsequent constructive interference can be realized. We analyse the effects of the collision-induced coherent and incoherent decay rates, laser intensity, and energy separation of the doublets on the interference. Meanwhile, the constructive interference between the two transition pathways 3P_1/2-4D and 3P_3/2-4D via equal-frequency hybrid excitation and collision-aided radiative excitation in an Na₂-Na system is experimentally observed. A good agreement between the theoretical and experimental results is obtained.     

Single-mode rib polymer waveguides and electro-optic polymer waveguide switches

Mode-matching and effective index methods are used to analyze single-mode operation of optical rib polymer waveguides. Their single-mode waveguiding conditions are determined. Single-mode rib waveguides fabricated from guest–host polyetherketone are presented. The estimated propagation loss of straight rib-waveguides is 0.7 dB/cm at 1.55 μm. Furthermore, by using the mode field-transfer matrix method, 2×2 and 4×4 polymer Mach–Zehnder interference switch operating at 1.55 μm wavelength has been designed based on optical multi-mode interference.     

以LCD为目标的自动定焦判据选择

在光学综合自动测量中 ,使用液晶显示屏作为分划板可以大大简化结构 ,提高效率 ,真正地实现自动测量。由于液晶显示具有对比度低、噪声大等特点 ,所以根据液晶的这些特点以及图像处理和CCD信号接收的特点选择两种适用的判据进行了分析和试验比较 ,并给出了结果。结果表明 ,这两种判别函数都适用于以液晶显示屏为目标和用图像处理方法进行光学参数测量的系统 ,其中锐度判别函数更优于信息熵判别函数 ,前者具有更好的抗干扰性和稳定性 ,而且其判定结果更接近目视清晰度判别