Rapid synthesis and luminescence of the Eu, Er codoped ZnO quantum-dot chain via chemical precipitation method

ZnO quantum-dot chains codoped with Eu³⁺ and Er³⁺ were synthesized by the chemical precipitation method and the codoping effects on the structures, morphologies and optical properties of the powders were briefly investigated. The X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS) results indicated the Eu³⁺ and Er³⁺ were incorporated into the crystal lattice of ZnO host. Transmission electron microscope (TEM) measurements showed the sizes of the ZnO quantum dots decreased with the increase of Eu³⁺ and Er³⁺ doping concentration, and the quantum-dot chains were formed by codoping with Eu³⁺ and Er³⁺. The green emissions in the photoluminescence spectra were attributed to 4f-4f of Er³⁺ inner shell ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transitions, and the characteristic red emissions of Eu³⁺ ions were attributed to the ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transitions, respectively. Moreover, the red emission of the Eu³⁺ ions gradually decreased with the Er³⁺ ions doping concentration increased, which may be due to the different energy storage centers in the powders.     

Effect of non-magnetic doping on leakage and magnetic properties of BiFeO3 thin films

In this paper, we show that the leakage current properties of BiFeO₃ (BFO) thin films have been greatly improved by Zr-doping. In contrast, the magnetic properties of Zr-doped BFO films are affected as a weak ferromagnetism. Beyond the double-exchange interactions arising from the creation of Fe²⁺, we propose another simple model considering the replacement of the magnetically active Fe³⁺, time to time, by a non-active Zr⁴⁺, which is expected to induce a local ferromagnetic coupling rather than an antiferromagnetic one.     

Collisionless bounce resonance heating in dual-frequency capacitively coupled plasmas

We present the experimental evidence of the collisionless electron bounce resonance heating (BRH) in low-pressure dual-frequency capacitively coupled plasmas. In capacitively coupled plasmas at low pressures when the discharge frequency and gap satisfy a certain resonant condition, the high energy beamlike electrons can be generated by fast sheath expansion, and heated by the two sheaths coherently, thus the BRH occurs. By using a combined measurement of a floating double probe and optical emission spectroscopy, we demonstrate the effect of BRH on plasma properties, such as plasma density and light emission, especially in dual-frequency discharges.     

Quantum criticality in a Mott pn junction in an armchair carbon nanotube

In an armchair carbon nanotube pn junction the p and n regions are separated by a region of a Mott insulator, which can backscatter electrons only in pairs. We predict a quantum-critical behavior in such a pn junction. Depending on the junction's built-in electric field E, its conductance G scales either to zero or to 4e(2)/h as the temperature T is lowered. The two types of the G(T) dependence indicate the existence, at some special value of E, of an intermediate quantum-critical point with a finite conductance G<4e(2)/h. This makes the pn junction drastically different from a simple potential barrier in a Luttinger liquid.     

Laser plasma shockwave cleaning of SiO2 particles on gold film

A Nd:YAG laser (1064 nm) induces optical breakdown of the airborne above the gold-coated K9 glass surface and the created shockwave removes the SiO₂ particles contaminated on the gold films. The laser cleaning efficiency has been characterized by optical microscopy, dark field imaging, ultraviolet-visible-near infrared spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and the Image-pro software. The relationships between removal ratio and particle position and laser gap distance have been studied in the case of single pulse laser cleaning. The results show that the 1064 nm laser induced plasma shockwave can effectively remove the SiO₂ particles. The removal ratio can reach above 90%. The effects of particle position and laser gap distance on the cleaning efficiency are simulated for the single pulse laser cleaning. The simulated results are consistent with the experimental ones.     

Characterization and oxidation behavior of NiCoCrAlY coating fabricated by electrophoretic deposition and vacuum heat treatment

Electrophoretic deposition (EPD) was showed to be a feasible and convenient method to fabricate NiCoCrAlY coatings on nickel based supperalloys. The microstructure and composition of the NiCoCrAlY coatings after vacuum heat treatment were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDAX). Isothermal-oxidation test was performed at 1100 °C in static air for 100 h. The results show that the major phases in electrophoretic deposited and vacuum heat treated NiCoCrAlY coating are γ-Ni and γ′-Ni₃Al phases, also there is an extremely small quantity of Al₂O₃ in the coating. Composition fluctuations occur in the coating and a certain amount of titanium diffuse from the superalloy substrate to the top of the coating during vacuum heat treatment. The oxidation test results exhibit that the oxidation kinetics of this coating has two typical stages. The protective oxide layer is mainly formed in the initial linear growth stage and then the oxide layer hinders further oxidation of the coating in the subsequent parabolic growth stage. The coating can effectively protect the superalloy substrate from oxidation. A certain amount of rutile TiO₂ is formed in the coating during oxidation and it is adverse to the oxidation resistance of the coating.     

Synthesis of the chain-shaped carbon fibers decorated with SiO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> beads by chemical vapor deposition

Chain-shaped carbon fibers decorated with SiO _x beads had been synthesized by using methyltriehlorosilane and normal carbon fibers as the raw materials, during which the chemical vapor deposition technique was applied. The products were characterized by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), X-ray diffraction (XRD) and Raman spectroscopy. The as-received products show chain-shaped morphologies that have the normal carbon fibers as “strings” and possess regular SiO _x beads of 30–40 μm with relative smooth surface. The formation of the chain-shaped morphology is considered to involve the shrinkage of the absorbed silica layer and the possible growth mechanism is further proposed. It is thought that the chain-shaped carbon fibers are formed by two main stages.     

Electro- and magneto-optical switching of defect modes in one- dimensional photonic crystals

The transmission spectra of polarized light waves in a photonic crystal/liquid crystal (PC/LC) cell placed between crossed polarizers and controlled by an electric or magnetic field have been studied experimentally and theoretically. Electro- and magneto-optical switching based on the interference of polarized defect modes has been demonstrated. The transmission spectra of the PC/LC cell have been calculated as a function of the voltage applied to the LC layer and the magnetic field strength. The results of the calculations agree well with the experimental data.     

基于发射光谱的DF激光器光腔温度与粒子数分布

 建立了谱线增益系数与温度、粒子数分布之间及谱线增益系数与谱线强度之间的关系式,对一台燃烧驱动DF激光器的发射光谱进行了测量,利用发射光谱数据计算得到光腔温度为381.4 K,分布在振动态能级1与0,振动能级2与1,振动能级3与2的粒子数之比分别为0.60～0.62, 0.676 4, 0.71～0.74。     

环形电子束积分图像诊断技术

 采用图像诊断方法对高能环形电子束形状及空间尺寸进行了研究,以高能脉冲环形电子束轰击高Z靶材料产生脉冲X射线,X射线经过X射线增感屏转换为可见光,用单次图像采集系统获取可见光的积分图像。为满足诊断所需的空间分辨和系统灵敏度,通过理论计算确立了靶的材料、厚度及X射线增感屏的型号和厚度等参数。根据测试环境,设计了系统的现场安装结构,系统基本满足测试要求。分析从实验中获取的图像,可知环形电子束的内径为36.5 mm,环厚为1 mm,环形不均匀,水平方向电子束强。