Liquid–paper interactions during liquid drop impact and recoil on paper surfaces

The spreading and recoiling of water drops on several flat and macroscopically smooth model surfaces and on sized paper surfaces were studied over a range of drop impaction velocities using a high-speed CCD camera. The water drop spreading and recoiling results on several model hydrophobic and hydrophilic surfaces were found to be in agreement with observations reported in the literature. The maximum drop spreading diameter for those model surfaces at impact was found to be dependent upon the initial drop kinetic energy and the degree of hydrophobicity/hydrophilicity of the surface. The extent of the maximum drop recoiling was found to be much weaker for hydrophilic substrates than for hydrophobic substrates. Sized papers, however, showed an interesting switch of behaviour in the process of water drop impaction. They behave like a hydrophobic substrate when a water drop impacts on it, but like a hydrophilic substrate when water drop recoils. Although the contact angle between water and hydrophilic or hydrophobic non-porous surfaces changes from advancing to receding as reported in literature, the change of contact angle during water impact on paper surface is unique in that the level of sizing was found to have a smaller than expected influence on the degree of recoil. Atomic force microscopy (AFM) was used to probe fibres on a sized filter paper surface under water. The AFM data showed that water interacted strongly with the fibre even though the paper was heavily sized. Implications of this phenomenon were discussed in the context of inkjet print quality and of the surface conditions of sized papers. Results of this study are very useful in the understanding of inkjet ink droplet impaction on paper surfaces which sets the initial condition for ink penetration into paper after impaction.     

二氢茉莉酮酸甲酯的简便合成方法

本文报道二氢茉莉酮酸甲酯的简便合成方法。先由丁二酸和庚酰氯反应得到2-戊基-1,3-环戊二酮(1),再用甲醇醚化1,可得到2-戊基-3-甲氧基-环戊-2-烯酮(2)。2与丙二酸二甲酯反应生成(2-戊基-3-酮-1-环戊烯-)基乙酸甲酮(3)。最后,催化氢化3,便可得到二氢茉莉酮酸甲酯(4)。     

A note on differentiability of the cluster density for independent percolation in high dimensions

The cluster density function of independent percolation in ad-dimensional lattice is considered. For eachn, it is shown that(p) has finitenth leftderivative at critical probabilityp _c ifd is sufficiently large. This result agrees with the Bethe lattice approximation, where thenth one-sided derivative of(p) is bounded atp _c for alln.     

Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

Simplified Labeling Approach for Synthesizing 3′-Deoxy-3′-[18F]fluorothymidine ([18F]FLT)

[¹⁸F]FLT (3-deoxy-3-[¹⁸F]fluorothymidine) turned out to be a tracer particularly suitable for PET imaging of tumor proliferation because of lacking degradation in vivo. To facilitate clinical studies with [¹⁸F]FLT, we investigated two new easily accessible precursors, 2,3-anhydrothymidine (AThy) and 5-O-(4,4-dimethoxytriphenylmethyl)-2,3-anhydrothymidine (DMTThy), using a common approach for introducing the label with nucleophilic [¹⁸F]fluoride. Radiochemical yields were determined in dependence on substrate concentration, reaction time and temperature. In the case of AThy (10 mg), best FLT yields were 5.3%±1.2 (130 °C, 30 min). Labeling of DMTThy (10 mg) gave 14.3%±3.3 at 160 °C within 10 minutes. Starting with an aqueous solution of 20 GBq [¹⁸F]fluoride the new method allows to produce 1.3 GBq [¹⁸F]FLT within 90 minutes ready for intravenous injection. The new labeling procedures allow [¹⁸F]FLT synthesis without lengthy preparation of the precursor and with high reproducibility mandatory for clinical application.     

Luminescent heteronuclear Au(I)5Ag(I)8 complexes of [1,2,3-C6(C6H4R-4)3]3- (R = H, CH3, But) by cyclotrimerization of arylacetylides

Unusual AuI-AgI heterometallic complexes [Au5Ag8(mu-dppm)4{1,2,3-C6(C6H4R-4)3}(CCC6H4R-4)7]3+ (R = H 1, CH3 2, But 3) were isolated by reactions of polymeric silver arylacetylides (AgCCC6H4R-4)n with binuclear gold component [Au2(mu-dppm)2(MeCN)2]2+ (dppm = bis(diphenylphosphino)methane), in which cyclotrimerization of arylacetylide -CCC6H4R-4 affords trianion {1,2,3-C6(C6H4R-4)3}3- with an unprecedented mu5-bonding mode. Compounds 1(SbF6)3-3(SbF6)3 exhibit intense photoluminescence derived from an MLCT (Au5Ag8 --> CCC6H4R-4) transition, mixed with a metal cluster-centered excited states.     

Mass resolved MPI spectra of methyl iodide in the 430-490 nm region

The mass resolved multiphoton ionization (MPI) spectra of methyl iodide were obtained in the 430-490 nm region using a time-of-flight (TOF) mass spectrometer. They have the same vibrational structure, which testifies that the fragment species, in the wavelength region under study, are from the photodissociation of multiphoton ionized molecular parent ions. Some features in the spectra are identified as three-photon excitations to 6p and 7s Rydberg states of methyl iodide. Two new vibrational structures of some Rydberg states are observed. The mechanism of ionization and dissociation is also discussed.     

Visible Light-Driven Alkyne-Grafted Ethylene-Bridged Azobenzene Chromophores for Photothermal Utilization

Molecular photoswitches are considered to be important candidates in the field of solar energy storage due to their sensitive and reversible bidirectional optical response. Nevertheless, it is still a daunting challenge to design a molecular photoswitch to improve the low solar spectrum utilization and quantum yields while achieving charging and discharging of heat without solvent assistance. Herein, a series of visible-light-driven ethylene-bridged azobenzene (b-Azo) chromophores with different alkyne substituents which can undergo isomerization reactions promoted in both directions by visible light are reported. Their visible light responsiveness improves their solar spectrum utilization while also having high quantum yields. In addition, as the compounds are liquids, there is no need to dissolve the compounds in order to exploit this switching. The photoisomerization of b-Azo can be adjusted by alkyne-related substituents, and hexyne-substituted b-Azo is able to store and release photothermal energy with a high density of 106.1 J·g⁻¹, and can achieve a temperature increase of 1.8 °C at a low temperature of −1 °C.     

Facile Synthesis of Tricyclic 1,2,4-Oxadiazolines-Fused Tetrahydro-Isoquinolines from Oxime Chlorides with 3,4-Dihydroisoquinoline Imines

A mild and efficient strategy for the synthesis of tricyclic 1,2,4-oxadiazolines-fused tetrahydro-isoquinolines derivatives via [3 + 2] cycloaddition reaction is reported. The reactions provided the functionalized tricyclic 1,2,4-oxadiazolines in high yields (up to 96%). This protocol is simple and easy to handle. Moreover, a gram-scale experiment further highlights the synthetic utility. The chemical structure of the product was determined by X-ray single-crystal structure analysis. A possible mechanism for this transformation is proposed to explain the reaction process.     

PTC: Full and Drift Particle Orbit Tracing Code for α Particles in Tokamak Plasmas

Fusion born α particle confinement is one of the most important issues in burning plasmas,such as ITER and CFETR.However,it is extremely complex due to the nonequilibrium characteristics,and multiple temporal and spatial scales coupling with background plasma.A numerical code using particle orbit tracing method(PTC)has been developed to study energetic particle confinement in tokamak plasmas.Both full orbit and drift orbit solvers are implemented to analyze the Larmor radius effects on α particle confinement.The elastic collisions between alpha particles and thermal plasma are calculated by a Monte Carlo method.A triangle mesh in poloidal section is generated for electromagnetic fields expression.Benchmark between PTC and ORBIT has been accomplished for verification.For CFETR burning plasmas,PTC code is used for α particle source and slowing down process calculation in 2D equilibrium.In future work,3D field like toroidal field ripples,Alfven and magnetohydrodynamics instabilities perturbation inducing α particle transport will be analyzed.